6.7.2 Test Procedure (revision 3.1r1, subset level 3)

Device under test: Step Function I/O dnp3 outstation

All results
10:55:59.044 Running procedure: 6.7.2
10:55:59.046 This procedure is enabled because the following options:
10:55:59.046 - supports.selfAddress == true
10:55:59.046 step: 1
10:55:59.046 - Device supports self-address
10:55:59.046 step: 2
10:55:59.046 - Enable data link self-address support
10:55:59.046 [PLG] Self address support is set to true
10:55:59.046 [PLG] Cycling power
10:55:59.048 step: 3
10:55:59.048 - Cycle power to the DUT
10:55:59.048 [PLG] Cycling power
10:55:59.049 step: 4
10:55:59.049 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 using link options: { destination == 0xFFFC }
10:55:59.049 - g60v1, All Objects
10:55:59.049 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
10:55:59.049 g60v1, All Objects
10:55:59.049 --T-> fir: 1 fin: 1 seq: 0
10:55:59.049 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 65532 src: 1
10:55:59.049 --P-> 05 64 0B C4 FC FF 01 00 DE 05
10:55:59.049 C0 C0 01 3C 01 06 FF 50
10:55:59.049 step: 5
10:55:59.049 - Read any number of valid responses beginning w/ sequence(0x00) and incrementing by 1 modulo 16
10:55:59.049 - Confirm each response that asks for a confirmation
10:55:59.051 <-P-- 05 64 E0 44 01 00 00 04 70 7A
10:55:59.051 C0 C0 81 90 00 01 01 01 00 00 0B 00 00 00 0A 02 97 78
10:55:59.051 01 00 00 13 00 01 01 01 01 01 01 01 01 01 01 01 96 07
10:55:59.051 01 01 01 01 01 01 01 01 01 14 02 01 00 00 09 00 26 7E
10:55:59.051 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 FE 85
10:55:59.051 00 00 01 00 00 01 00 00 01 00 00 01 00 00 15 02 85 CD
10:55:59.051 01 00 00 09 00 01 00 00 01 00 00 01 00 00 01 00 B6 06
10:55:59.051 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 9E 0F
10:55:59.051 01 00 00 1E 02 01 00 00 09 00 01 00 00 01 00 00 0A 10
10:55:59.051 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 FE 85
10:55:59.051 00 00 01 00 00 01 00 00 28 02 01 00 00 13 00 01 EF FE
10:55:59.051 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 DB 49
10:55:59.051 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 9E 0F
10:55:59.051 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 FE 85
10:55:59.051 00 00 01 00 00 01 00 00 01 00 00 61 8D
10:55:59.051 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 224 dest: 1 src: 1024
10:55:59.051 <-T-- fir: 1 fin: 1 seq: 0
10:55:59.052 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 IIN(DeviceRestart, NeedTime)
10:55:59.052 g1v1, 2-Byte Start/Stop, start: 0 stop: 11
10:55:59.052 [0] - BooleanValue(false)
10:55:59.052 [1] - BooleanValue(false)
10:55:59.052 [2] - BooleanValue(false)
10:55:59.052 [3] - BooleanValue(false)
10:55:59.052 [4] - BooleanValue(false)
10:55:59.052 [5] - BooleanValue(false)
10:55:59.052 [6] - BooleanValue(false)
10:55:59.052 [7] - BooleanValue(false)
10:55:59.052 [8] - BooleanValue(false)
10:55:59.052 [9] - BooleanValue(false)
10:55:59.052 [10] - BooleanValue(false)
10:55:59.052 [11] - BooleanValue(false)
10:55:59.052 g10v2, 2-Byte Start/Stop, start: 0 stop: 19
10:55:59.052 [0] - flags: 0x01
10:55:59.052 [1] - flags: 0x01
10:55:59.052 [2] - flags: 0x01
10:55:59.052 [3] - flags: 0x01
10:55:59.052 [4] - flags: 0x01
10:55:59.052 [5] - flags: 0x01
10:55:59.052 [6] - flags: 0x01
10:55:59.052 [7] - flags: 0x01
10:55:59.052 [8] - flags: 0x01
10:55:59.052 [9] - flags: 0x01
10:55:59.052 [10] - flags: 0x01
10:55:59.052 [11] - flags: 0x01
10:55:59.052 [12] - flags: 0x01
10:55:59.052 [13] - flags: 0x01
10:55:59.052 [14] - flags: 0x01
10:55:59.052 [15] - flags: 0x01
10:55:59.052 [16] - flags: 0x01
10:55:59.052 [17] - flags: 0x01
10:55:59.052 [18] - flags: 0x01
10:55:59.052 [19] - flags: 0x01
10:55:59.052 g20v2, 2-Byte Start/Stop, start: 0 stop: 9
10:55:59.052 [0] - flags: 0x01 count: 0
10:55:59.052 [1] - flags: 0x01 count: 0
10:55:59.052 [2] - flags: 0x01 count: 0
10:55:59.052 [3] - flags: 0x01 count: 0
10:55:59.052 [4] - flags: 0x01 count: 0
10:55:59.052 [5] - flags: 0x01 count: 0
10:55:59.052 [6] - flags: 0x01 count: 0
10:55:59.052 [7] - flags: 0x01 count: 0
10:55:59.052 [8] - flags: 0x01 count: 0
10:55:59.052 [9] - flags: 0x01 count: 0
10:55:59.052 g21v2, 2-Byte Start/Stop, start: 0 stop: 9
10:55:59.052 [0] - flags: 0x01 count: 0
10:55:59.052 [1] - flags: 0x01 count: 0
10:55:59.052 [2] - flags: 0x01 count: 0
10:55:59.052 [3] - flags: 0x01 count: 0
10:55:59.052 [4] - flags: 0x01 count: 0
10:55:59.052 [5] - flags: 0x01 count: 0
10:55:59.052 [6] - flags: 0x01 count: 0
10:55:59.052 [7] - flags: 0x01 count: 0
10:55:59.052 [8] - flags: 0x01 count: 0
10:55:59.052 [9] - flags: 0x01 count: 0
10:55:59.052 g30v2, 2-Byte Start/Stop, start: 0 stop: 9
10:55:59.052 [0] - flags: 0x01 value: 0
10:55:59.052 [1] - flags: 0x01 value: 0
10:55:59.052 [2] - flags: 0x01 value: 0
10:55:59.052 [3] - flags: 0x01 value: 0
10:55:59.052 [4] - flags: 0x01 value: 0
10:55:59.052 [5] - flags: 0x01 value: 0
10:55:59.052 [6] - flags: 0x01 value: 0
10:55:59.052 [7] - flags: 0x01 value: 0
10:55:59.052 [8] - flags: 0x01 value: 0
10:55:59.052 [9] - flags: 0x01 value: 0
10:55:59.052 g40v2, 2-Byte Start/Stop, start: 0 stop: 19
10:55:59.052 [0] - flags: 0x01 value: 0
10:55:59.052 [1] - flags: 0x01 value: 0
10:55:59.052 [2] - flags: 0x01 value: 0
10:55:59.052 [3] - flags: 0x01 value: 0
10:55:59.052 [4] - flags: 0x01 value: 0
10:55:59.052 [5] - flags: 0x01 value: 0
10:55:59.052 [6] - flags: 0x01 value: 0
10:55:59.052 [7] - flags: 0x01 value: 0
10:55:59.052 [8] - flags: 0x01 value: 0
10:55:59.052 [9] - flags: 0x01 value: 0
10:55:59.052 [10] - flags: 0x01 value: 0
10:55:59.052 [11] - flags: 0x01 value: 0
10:55:59.052 [12] - flags: 0x01 value: 0
10:55:59.052 [13] - flags: 0x01 value: 0
10:55:59.052 [14] - flags: 0x01 value: 0
10:55:59.052 [15] - flags: 0x01 value: 0
10:55:59.052 [16] - flags: 0x01 value: 0
10:55:59.052 [17] - flags: 0x01 value: 0
10:55:59.052 [18] - flags: 0x01 value: 0
10:55:59.052 [19] - flags: 0x01 value: 0
10:55:59.052 step: 6
10:55:59.052 - Disable data link self-address support
10:55:59.052 [PLG] Self address support is set to false
10:55:59.052 [PLG] Cycling power
10:55:59.055 step: 7
10:55:59.055 - Cycle power to the DUT
10:55:59.055 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 using link options: { destination == 0xFFFC }
10:55:59.055 - g60v1, All Objects
10:55:59.055 [PLG] Cycling power
10:55:59.058 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
10:55:59.058 g60v1, All Objects
10:55:59.058 --T-> fir: 1 fin: 1 seq: 0
10:55:59.058 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 65532 src: 1
10:55:59.058 --P-> 05 64 0B C4 FC FF 01 00 DE 05
10:55:59.058 C0 C0 01 3C 01 06 FF 50
10:55:59.058 step: 8
10:55:59.058 - Verify that no link layer frames are received within 2000 ms
10:56:01.061 frame receive timeout
10:56:01.061 Passed procedure: 6.7.2