| 10:56:01.511 | Running procedure: 8.1.2 | |
| 10:56:01.513 | step: 1 | |
| 10:56:01.513 | - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 | |
| 10:56:01.513 | - g10v0, All Objects | |
| 10:56:01.513 | --A-> | Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 |
| 10:56:01.513 | g10v0, All Objects | |
| 10:56:01.513 | --T-> | fir: 1 fin: 1 seq: 0 |
| 10:56:01.513 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1 |
| 10:56:01.513 | --P-> | 05 64 0B C4 00 04 01 00 CA 8A |
| 10:56:01.513 | C0 C0 01 0A 00 06 53 98 | |
| 10:56:01.514 | steps: 2, 3 and 5 | |
| 10:56:01.514 | - Device supports binary output status (g10) | |
| 10:56:01.514 | - Read any number of valid responses beginning w/ sequence(0x00) and incrementing by 1 modulo 16 | |
| 10:56:01.514 | - Verify that the response contains objects | |
| 10:56:01.514 | - Verify that the device responds with only variations: Set(g10v2) | |
| 10:56:01.514 | - Verify that the objects are in start/stop ranges with 1-octet (qualifier 0x00) or 2-octet (qualifier 0x01) indexes | |
| 10:56:01.514 | - Verify that the flags behave as the note on flags in Section 2 requires (Note 5 in 2.7, Note 6 in 3.1r1). | |
| 10:56:01.514 | - Confirm each response that asks for a confirmation | |
| 10:56:01.514 | <-P-- | 05 64 25 44 01 00 00 04 07 3D |
| 10:56:01.514 | C0 C0 81 90 00 0A 02 01 00 00 13 00 01 01 01 01 3A 43 | |
| 10:56:01.514 | 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 BB C3 | |
| 10:56:01.514 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 37 dest: 1 src: 1024 |
| 10:56:01.514 | <-T-- | fir: 1 fin: 1 seq: 0 |
| 10:56:01.515 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 IIN(DeviceRestart, NeedTime) |
| 10:56:01.515 | g10v2, 2-Byte Start/Stop, start: 0 stop: 19 | |
| 10:56:01.515 | [0] - flags: 0x01 | |
| 10:56:01.515 | [1] - flags: 0x01 | |
| 10:56:01.515 | [2] - flags: 0x01 | |
| 10:56:01.515 | [3] - flags: 0x01 | |
| 10:56:01.515 | [4] - flags: 0x01 | |
| 10:56:01.515 | [5] - flags: 0x01 | |
| 10:56:01.515 | [6] - flags: 0x01 | |
| 10:56:01.515 | [7] - flags: 0x01 | |
| 10:56:01.515 | [8] - flags: 0x01 | |
| 10:56:01.515 | [9] - flags: 0x01 | |
| 10:56:01.515 | [10] - flags: 0x01 | |
| 10:56:01.515 | [11] - flags: 0x01 | |
| 10:56:01.515 | [12] - flags: 0x01 | |
| 10:56:01.515 | [13] - flags: 0x01 | |
| 10:56:01.515 | [14] - flags: 0x01 | |
| 10:56:01.515 | [15] - flags: 0x01 | |
| 10:56:01.515 | [16] - flags: 0x01 | |
| 10:56:01.515 | [17] - flags: 0x01 | |
| 10:56:01.515 | [18] - flags: 0x01 | |
| 10:56:01.515 | [19] - flags: 0x01 | |
| 10:56:01.517 | Passed procedure: 8.1.2 |