10:59:51.767		Running procedure: 8.13.2d
10:59:51.768		This procedure is enabled because the following options:
10:59:51.768		- supports.binaryInput == true
10:59:51.768		- supports.disable.binaryInput == true
10:59:51.768		- supports.binaryInputReads == true
10:59:51.768		step: 1
10:59:51.768		- The DUT's binary inputs can be uninstalled or disabled through its configuration
10:59:51.768		step: 2
10:59:51.768		- Uninstall or disable every binary input point on the DUT
10:59:51.768	[PLG]	All binary input points were uninstalled
10:59:51.768	[PLG]	Cycling power
10:59:51.772		step: 3
10:59:51.772		- Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
10:59:51.772		- g1v0, All Objects
10:59:51.772	--A->	Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
10:59:51.772		g1v0, All Objects
10:59:51.772	--T->	fir: 1 fin: 1 seq: 0
10:59:51.772	--L->	master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
10:59:51.772	--P->	05 64 0B C4 00 04 01 00 CA 8A
10:59:51.772		C0 C1 01 01 00 06 5D 5C
10:59:51.772		step: 4
10:59:51.772		- Read a single fragment response w/ sequence(0x01)
10:59:51.772		- Verify that the response is empty
10:59:51.772		- Verify that the IIN field contains at least one of IIN(ParamError, ObjectUnknown)
10:59:51.772		- Verify that the IIN field does not contain bits IIN(FuncNotSupported)
10:59:51.773	<-P--	05 64 0A 44 01 00 00 04 67 88
10:59:51.773		C0 C1 81 90 02 CF 82
10:59:51.773	<-L--	master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024
10:59:51.773	<-T--	fir: 1 fin: 1 seq: 0
10:59:51.773	<-A--	Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 IIN(DeviceRestart, NeedTime, ObjectUnknown)
10:59:51.773		Passed procedure: 8.13.2d
10:59:51.773		restore
10:59:51.773		- Reinstall or re-enable the points that were uninstalled or disabled, so later procedures can use them
10:59:51.773	[PLG]	All points were reinstalled
10:59:51.773	[PLG]	Cycling power