11:01:27.765		Running procedure: 8.15.2
11:01:27.766		This procedure is enabled because the following options:
11:01:27.766		- supports.binaryInput == true
11:01:27.766		- supports.binaryInputChangeEvents == true
11:01:27.766		- supports.binaryInputEventReads == true
11:01:27.766		step: 1
11:01:27.766		- Generate 1 Binary Input Change Event(s)
11:01:27.766	[PLG]	Updated BI 0: value=true, flags=81, timestamp=1793185287766 (UNSYNCHRONIZED_TIME)
11:01:27.766		The plugin reports the DUT's clock unsynchronized
11:01:27.766		step: 2
11:01:27.766		- Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
11:01:27.766		- g2v3, All Objects
11:01:27.767	--A->	Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
11:01:27.767		g2v3, All Objects
11:01:27.767	--T->	fir: 1 fin: 1 seq: 0
11:01:27.767	--L->	master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
11:01:27.767	--P->	05 64 0B C4 00 04 01 00 CA 8A
11:01:27.767		C0 C1 01 02 03 06 3E C6
11:01:27.767		step: 3
11:01:27.767		- Read a single fragment response w/ sequence(0x01)
11:01:27.767		- Verify that the response holds every Binary Input event generated
11:01:27.767		- If the events carry timestamps, verify that the gaps between them match the gaps between when the events were generated, to the Device Profile's resolution
11:01:27.767		- Verify that an application layer confirmation is requested.
11:01:27.767		- Verify that the events are reported as 3.1r1's rules for event reporting require, for a read of g2v3, by the state of the DUT's clock when it recorded them, where the procedure or the plugin knows it
11:01:27.767		- Verify that the flags behave as the note on flags in Section 2 requires (Note 5 in 2.7, Note 6 in 3.1r1).
11:01:27.767		- Confirm each response that asks for a confirmation
11:01:27.767	<-P--	05 64 1E 44 01 00 00 04 C8 BD
11:01:27.767		C0 E1 81 90 00 33 02 07 01 56 0E 2C 82 A1 01 02 6E 0B
11:01:27.767		03 28 01 00 00 00 81 00 00 9A 2A
11:01:27.767	<-L--	master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 30 dest: 1 src: 1024
11:01:27.767	<-T--	fir: 1 fin: 1 seq: 0
11:01:27.768	<-A--	Response(0x81) fir: 1 fin: 1 con: 1 uns: 0 seq: 0x01 IIN(DeviceRestart, NeedTime)
11:01:27.768		g51v2, 1-Byte Count, count: 1
11:01:27.768		time: 1793185287766
11:01:27.768		g2v3, 2-Byte Count and Index, count: 1
11:01:27.768		[0] - flags: 0x81 cto: 0
11:01:27.768	--A->	Confirm(0x00) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
11:01:27.768	--T->	fir: 1 fin: 1 seq: 0
11:01:27.768	--L->	master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 8 dest: 1024 src: 1
11:01:27.768	--P->	05 64 08 C4 00 04 01 00 9A 19
11:01:27.768		C0 C1 00 7D 3D
11:01:27.768	[PLG]	Verified 1 binary input point event(s)
11:01:27.768		step: 4
11:01:27.768		- If the response has no binary input events with relative time, no further 8.15 tests apply: 8.15.3 runs only where the DUT records events with time and doesn't reject the read
11:01:27.768		Passed procedure: 8.15.2