8.19.2c Analog Input Change, Without Confirm (revision 3.1r1, subset level 3)

Device under test: Step Function I/O dnp3 outstation

All results
11:01:57.009 Running procedure: 8.19.2c
11:01:57.010 This procedure is enabled because the following options:
11:01:57.010 - supports.analogInputEventReads == true
11:01:57.010 - supports.analogInput == true
11:01:57.010 - supports.analogInputChangeEvents == true
11:01:57.010 step: 1
11:01:57.010 - Raise an analog input by more than its configured deadband and hold it steady, so that an event is generated
11:01:57.010 [PLG] Updated AI 0: value=100.0, flags=1, timestamp=1793185317010 (UNSYNCHRONIZED_TIME)
11:01:57.010 [PLG] Updated AI 1: value=100.0, flags=1, timestamp=1793185317010 (UNSYNCHRONIZED_TIME)
11:01:57.010 [PLG] Updated AI 2: value=100.0, flags=1, timestamp=1793185317010 (UNSYNCHRONIZED_TIME)
11:01:57.010 [PLG] Updated AI 3: value=100.0, flags=1, timestamp=1793185317010 (UNSYNCHRONIZED_TIME)
11:01:57.010 [PLG] Updated AI 4: value=100.0, flags=1, timestamp=1793185317010 (UNSYNCHRONIZED_TIME)
11:01:57.010 [PLG] Updated AI 5: value=100.0, flags=1, timestamp=1793185317010 (UNSYNCHRONIZED_TIME)
11:01:57.010 [PLG] Updated AI 6: value=100.0, flags=1, timestamp=1793185317010 (UNSYNCHRONIZED_TIME)
11:01:57.010 [PLG] Updated AI 7: value=100.0, flags=1, timestamp=1793185317010 (UNSYNCHRONIZED_TIME)
11:01:57.010 [PLG] Updated AI 8: value=100.0, flags=1, timestamp=1793185317010 (UNSYNCHRONIZED_TIME)
11:01:57.010 [PLG] Updated AI 9: value=100.0, flags=1, timestamp=1793185317010 (UNSYNCHRONIZED_TIME)
11:01:57.011 step: 2
11:01:57.011 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
11:01:57.011 - g32v0, All Objects
11:01:57.011 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
11:01:57.011 g32v0, All Objects
11:01:57.012 --T-> fir: 1 fin: 1 seq: 0
11:01:57.012 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
11:01:57.012 --P-> 05 64 0B C4 00 04 01 00 CA 8A
11:01:57.012 C0 C0 01 20 00 06 68 86
11:01:57.012 steps: 3 to 6
11:01:57.012 - Read a single fragment response w/ sequence(0x00)
11:01:57.012 - Verify that the device responds with events, of only Set(g32v1, g32v2)
11:01:57.012 - Verify that the objects are prefixed with 1-octet (qualifier 0x17) or 2-octet (qualifier 0x28) indexes
11:01:57.012 - Verify that the reported value is the one the analog input was set to
11:01:57.012 - Verify that the flags behave as the note on flags in Section 2 requires (Note 5 in 2.7, Note 6 in 3.1r1).
11:01:57.012 - Verify that an application layer confirmation is requested.
11:01:57.013 <-P-- 05 64 55 44 01 00 00 04 39 1A
11:01:57.013 C0 E0 81 90 00 20 01 28 0A 00 00 00 01 64 00 00 D6 FC
11:01:57.013 00 01 00 01 64 00 00 00 02 00 01 64 00 00 00 03 39 99
11:01:57.013 00 01 64 00 00 00 04 00 01 64 00 00 00 05 00 01 91 5E
11:01:57.013 64 00 00 00 06 00 01 64 00 00 00 07 00 01 64 00 78 60
11:01:57.013 00 00 08 00 01 64 00 00 00 09 00 01 64 00 00 00 7B EA
11:01:57.013 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 85 dest: 1 src: 1024
11:01:57.013 <-T-- fir: 1 fin: 1 seq: 0
11:01:57.014 <-A-- Response(0x81) fir: 1 fin: 1 con: 1 uns: 0 seq: 0x00 IIN(DeviceRestart, NeedTime)
11:01:57.014 g32v1, 2-Byte Count and Index, count: 10
11:01:57.014 [0] - flags: 0x01 value: 100
11:01:57.014 [1] - flags: 0x01 value: 100
11:01:57.014 [2] - flags: 0x01 value: 100
11:01:57.014 [3] - flags: 0x01 value: 100
11:01:57.014 [4] - flags: 0x01 value: 100
11:01:57.014 [5] - flags: 0x01 value: 100
11:01:57.014 [6] - flags: 0x01 value: 100
11:01:57.014 [7] - flags: 0x01 value: 100
11:01:57.014 [8] - flags: 0x01 value: 100
11:01:57.014 [9] - flags: 0x01 value: 100
11:01:57.014 [PLG] Verified 10 analog input point event(s)
11:01:57.015 steps: 7 to 8
11:01:57.015 - Expect no response within 6000 ms.
11:02:03.021 step: 9
11:02:03.021 - Raise an analog input by more than its configured deadband and hold it steady, so that an event is generated
11:02:03.021 [PLG] Updated AI 0: value=200.0, flags=1, timestamp=1793185323021 (UNSYNCHRONIZED_TIME)
11:02:03.021 [PLG] Updated AI 1: value=200.0, flags=1, timestamp=1793185323021 (UNSYNCHRONIZED_TIME)
11:02:03.021 [PLG] Updated AI 2: value=200.0, flags=1, timestamp=1793185323021 (UNSYNCHRONIZED_TIME)
11:02:03.021 [PLG] Updated AI 3: value=200.0, flags=1, timestamp=1793185323021 (UNSYNCHRONIZED_TIME)
11:02:03.021 [PLG] Updated AI 4: value=200.0, flags=1, timestamp=1793185323021 (UNSYNCHRONIZED_TIME)
11:02:03.021 [PLG] Updated AI 5: value=200.0, flags=1, timestamp=1793185323021 (UNSYNCHRONIZED_TIME)
11:02:03.021 [PLG] Updated AI 6: value=200.0, flags=1, timestamp=1793185323021 (UNSYNCHRONIZED_TIME)
11:02:03.021 [PLG] Updated AI 7: value=200.0, flags=1, timestamp=1793185323021 (UNSYNCHRONIZED_TIME)
11:02:03.021 [PLG] Updated AI 8: value=200.0, flags=1, timestamp=1793185323021 (UNSYNCHRONIZED_TIME)
11:02:03.021 [PLG] Updated AI 9: value=200.0, flags=1, timestamp=1793185323021 (UNSYNCHRONIZED_TIME)
11:02:03.022 step: 10
11:02:03.022 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
11:02:03.022 - g32v0, All Objects
11:02:03.022 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
11:02:03.022 g32v0, All Objects
11:02:03.022 --T-> fir: 1 fin: 1 seq: 0
11:02:03.022 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
11:02:03.022 --P-> 05 64 0B C4 00 04 01 00 CA 8A
11:02:03.022 C0 C1 01 20 00 06 6E A5
11:02:03.022 steps: 11 to 14
11:02:03.022 - Read a single fragment response w/ sequence(0x01)
11:02:03.022 - Verify that the device responds with events, of only Set(g32v1, g32v2)
11:02:03.022 - Verify that the objects are prefixed with 1-octet (qualifier 0x17) or 2-octet (qualifier 0x28) indexes
11:02:03.022 - Verify that the reported value is the one the analog input was set to
11:02:03.022 - The DUT may also report the state applied in the first step before reporting the present state.
11:02:03.022 - Verify that the flags behave as the note on flags in Section 2 requires (Note 5 in 2.7, Note 6 in 3.1r1).
11:02:03.022 - Verify that an application layer confirmation is requested.
11:02:03.022 - Confirm each response that asks for a confirmation
11:02:03.025 <-P-- 05 64 9B 44 01 00 00 04 C2 54
11:02:03.025 C1 E1 81 90 00 20 01 28 14 00 00 00 01 64 00 00 E7 37
11:02:03.025 00 01 00 01 64 00 00 00 02 00 01 64 00 00 00 03 39 99
11:02:03.025 00 01 64 00 00 00 04 00 01 64 00 00 00 05 00 01 91 5E
11:02:03.025 64 00 00 00 06 00 01 64 00 00 00 07 00 01 64 00 78 60
11:02:03.025 00 00 08 00 01 64 00 00 00 09 00 01 64 00 00 00 7B EA
11:02:03.025 00 00 01 C8 00 00 00 01 00 01 C8 00 00 00 02 00 55 03
11:02:03.025 01 C8 00 00 00 03 00 01 C8 00 00 00 04 00 01 C8 E4 B3
11:02:03.025 00 00 00 05 00 01 C8 00 00 00 06 00 01 C8 00 00 AB 6E
11:02:03.025 00 07 00 01 C8 00 00 00 08 00 01 C8 00 00 00 09 A4 4F
11:02:03.025 00 01 C8 00 00 00 64 23
11:02:03.025 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 155 dest: 1 src: 1024
11:02:03.025 <-T-- fir: 1 fin: 1 seq: 1
11:02:03.025 <-A-- Response(0x81) fir: 1 fin: 1 con: 1 uns: 0 seq: 0x01 IIN(DeviceRestart, NeedTime)
11:02:03.025 g32v1, 2-Byte Count and Index, count: 20
11:02:03.025 [0] - flags: 0x01 value: 100
11:02:03.025 [1] - flags: 0x01 value: 100
11:02:03.025 [2] - flags: 0x01 value: 100
11:02:03.025 [3] - flags: 0x01 value: 100
11:02:03.025 [4] - flags: 0x01 value: 100
11:02:03.025 [5] - flags: 0x01 value: 100
11:02:03.025 [6] - flags: 0x01 value: 100
11:02:03.025 [7] - flags: 0x01 value: 100
11:02:03.025 [8] - flags: 0x01 value: 100
11:02:03.025 [9] - flags: 0x01 value: 100
11:02:03.025 [0] - flags: 0x01 value: 200
11:02:03.025 [1] - flags: 0x01 value: 200
11:02:03.025 [2] - flags: 0x01 value: 200
11:02:03.025 [3] - flags: 0x01 value: 200
11:02:03.025 [4] - flags: 0x01 value: 200
11:02:03.025 [5] - flags: 0x01 value: 200
11:02:03.025 [6] - flags: 0x01 value: 200
11:02:03.025 [7] - flags: 0x01 value: 200
11:02:03.025 [8] - flags: 0x01 value: 200
11:02:03.025 [9] - flags: 0x01 value: 200
11:02:03.025 --A-> Confirm(0x00) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
11:02:03.025 --T-> fir: 1 fin: 1 seq: 0
11:02:03.025 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 8 dest: 1024 src: 1
11:02:03.025 --P-> 05 64 08 C4 00 04 01 00 9A 19
11:02:03.025 C0 C1 00 7D 3D
11:02:03.029 [PLG] Verified the current value of 10 analog input(s)
11:02:03.029 step: 15
11:02:03.029 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02
11:02:03.029 - g32v0, All Objects
11:02:03.029 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02
11:02:03.029 g32v0, All Objects
11:02:03.029 --T-> fir: 1 fin: 1 seq: 0
11:02:03.029 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
11:02:03.029 --P-> 05 64 0B C4 00 04 01 00 CA 8A
11:02:03.029 C0 C2 01 20 00 06 64 C0
11:02:03.029 step: 16
11:02:03.029 - Read a single fragment response w/ sequence(0x02)
11:02:03.029 - Verify that the response is empty
11:02:03.029 - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported)
11:02:03.029 <-P-- 05 64 0A 44 01 00 00 04 67 88
11:02:03.029 C2 C2 81 90 00 3E A2
11:02:03.029 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024
11:02:03.029 <-T-- fir: 1 fin: 1 seq: 2
11:02:03.029 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 IIN(DeviceRestart, NeedTime)
11:02:03.029 Passed procedure: 8.19.2c