8.2.1.2.12 Binary Output, SBO, Incrementing Sequence Number Select Retries (revision 3.1r1, subset level 3)

Device under test: Step Function I/O dnp3 outstation

All results
10:56:15.290 Running procedure: 8.2.1.2.12
10:56:15.291 This procedure is enabled because the following options:
10:56:15.291 - supports.binaryOutput.commands == true
10:56:15.291 step: 2
10:56:15.291 - Select(0x03) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
10:56:15.291 - g12v1, 1-Byte Count and Index, count: 1
10:56:15.291 - [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:15.292 --A-> Select(0x03) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
10:56:15.292 g12v1, 1-Byte Count and Index, count: 1
10:56:15.292 [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:15.292 --T-> fir: 1 fin: 1 seq: 0
10:56:15.292 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 24 dest: 1024 src: 1
10:56:15.292 --P-> 05 64 18 C4 00 04 01 00 5B 61
10:56:15.292 C0 C0 03 0C 01 17 01 00 03 01 64 00 00 00 C8 00 FD 11
10:56:15.292 00 00 00 FF FF
10:56:15.292 step: 3
10:56:15.292 - Read a single fragment response w/ sequence(0x00)
10:56:15.292 - Verify the response contains the exact object header:
10:56:15.292 - g12v1, 1-Byte Count and Index, count: 1
10:56:15.292 - [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:15.292 - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported)
10:56:15.293 <-P-- 05 64 1A 44 01 00 00 04 A6 F0
10:56:15.293 C0 C0 81 90 00 0C 01 17 01 00 03 01 64 00 00 00 9C 9A
10:56:15.293 C8 00 00 00 00 78 FB
10:56:15.293 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 26 dest: 1 src: 1024
10:56:15.293 <-T-- fir: 1 fin: 1 seq: 0
10:56:15.293 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 IIN(DeviceRestart, NeedTime)
10:56:15.293 g12v1, 1-Byte Count and Index, count: 1
10:56:15.293 [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:15.293 step: 4
10:56:15.293 - Select(0x03) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
10:56:15.293 - g12v1, 1-Byte Count and Index, count: 1
10:56:15.293 - [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:15.293 --A-> Select(0x03) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
10:56:15.293 g12v1, 1-Byte Count and Index, count: 1
10:56:15.293 [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:15.293 --T-> fir: 1 fin: 1 seq: 0
10:56:15.293 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 24 dest: 1024 src: 1
10:56:15.293 --P-> 05 64 18 C4 00 04 01 00 5B 61
10:56:15.293 C0 C1 03 0C 01 17 01 00 03 01 64 00 00 00 C8 00 E5 7F
10:56:15.293 00 00 00 FF FF
10:56:15.294 step: 5
10:56:15.294 - Read a single fragment response w/ sequence(0x01)
10:56:15.294 - Verify the response contains the exact object header:
10:56:15.294 - g12v1, 1-Byte Count and Index, count: 1
10:56:15.294 - [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:15.294 - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported)
10:56:15.294 <-P-- 05 64 1A 44 01 00 00 04 A6 F0
10:56:15.294 C1 C1 81 90 00 0C 01 17 01 00 03 01 64 00 00 00 08 B9
10:56:15.294 C8 00 00 00 00 78 FB
10:56:15.294 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 26 dest: 1 src: 1024
10:56:15.294 <-T-- fir: 1 fin: 1 seq: 1
10:56:15.294 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 IIN(DeviceRestart, NeedTime)
10:56:15.294 g12v1, 1-Byte Count and Index, count: 1
10:56:15.294 [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:15.294 step: 6
10:56:15.294 - Operate(0x04) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02
10:56:15.294 - g12v1, 1-Byte Count and Index, count: 1
10:56:15.294 - [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:15.294 --A-> Operate(0x04) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02
10:56:15.294 g12v1, 1-Byte Count and Index, count: 1
10:56:15.294 [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:15.294 --T-> fir: 1 fin: 1 seq: 0
10:56:15.294 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 24 dest: 1024 src: 1
10:56:15.294 --P-> 05 64 18 C4 00 04 01 00 5B 61
10:56:15.294 C0 C2 04 0C 01 17 01 00 03 01 64 00 00 00 C8 00 1D 75
10:56:15.294 00 00 00 FF FF
10:56:15.294 step: 7
10:56:15.294 - Read a single fragment response w/ sequence(0x02)
10:56:15.294 - Verify the response contains the exact object header:
10:56:15.294 - g12v1, 1-Byte Count and Index, count: 1
10:56:15.294 - [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:15.294 - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported)
10:56:15.295 <-P-- 05 64 1A 44 01 00 00 04 A6 F0
10:56:15.295 C2 C2 81 90 00 0C 01 17 01 00 03 01 64 00 00 00 B4 DD
10:56:15.295 C8 00 00 00 00 78 FB
10:56:15.295 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 26 dest: 1 src: 1024
10:56:15.295 <-T-- fir: 1 fin: 1 seq: 2
10:56:15.295 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 IIN(DeviceRestart, NeedTime)
10:56:15.295 g12v1, 1-Byte Count and Index, count: 1
10:56:15.295 [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:15.295 step: 8
10:56:15.295 - Check that binary control point 0 operate
10:56:15.295 [PLG] Binary output 0 did operate
10:56:15.295 Passed procedure: 8.2.1.2.12