8.2.1.2.7 Binary Output, SBO, Execute Off Time does not match Select Off Time (revision 3.1r1, subset level 3)

Device under test: Step Function I/O dnp3 outstation

All results
10:56:10.140 Running procedure: 8.2.1.2.7
10:56:10.141 This procedure is enabled because the following options:
10:56:10.141 - supports.binaryOutput.commands == true
10:56:10.141 step: 1
10:56:10.141 - Select(0x03) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
10:56:10.141 - g12v1, 1-Byte Count and Index, count: 1
10:56:10.141 - [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:10.142 --A-> Select(0x03) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
10:56:10.142 g12v1, 1-Byte Count and Index, count: 1
10:56:10.142 [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:10.142 --T-> fir: 1 fin: 1 seq: 0
10:56:10.142 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 24 dest: 1024 src: 1
10:56:10.142 --P-> 05 64 18 C4 00 04 01 00 5B 61
10:56:10.142 C0 C0 03 0C 01 17 01 00 03 01 64 00 00 00 C8 00 FD 11
10:56:10.142 00 00 00 FF FF
10:56:10.142 step: 2
10:56:10.142 - Read a single fragment response w/ sequence(0x00)
10:56:10.142 - Verify the response contains the exact object header:
10:56:10.142 - g12v1, 1-Byte Count and Index, count: 1
10:56:10.142 - [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:10.142 - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported)
10:56:10.142 <-P-- 05 64 1A 44 01 00 00 04 A6 F0
10:56:10.142 C0 C0 81 90 00 0C 01 17 01 00 03 01 64 00 00 00 9C 9A
10:56:10.142 C8 00 00 00 00 78 FB
10:56:10.142 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 26 dest: 1 src: 1024
10:56:10.142 <-T-- fir: 1 fin: 1 seq: 0
10:56:10.143 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 IIN(DeviceRestart, NeedTime)
10:56:10.143 g12v1, 1-Byte Count and Index, count: 1
10:56:10.143 [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:10.143 step: 3
10:56:10.143 - Operate(0x04) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
10:56:10.143 - g12v1, 1-Byte Count and Index, count: 1
10:56:10.143 - [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 201 status: 0 (SUCCESS)
10:56:10.143 --A-> Operate(0x04) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
10:56:10.143 g12v1, 1-Byte Count and Index, count: 1
10:56:10.143 [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 201 status: 0 (SUCCESS)
10:56:10.143 --T-> fir: 1 fin: 1 seq: 0
10:56:10.143 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 24 dest: 1024 src: 1
10:56:10.143 --P-> 05 64 18 C4 00 04 01 00 5B 61
10:56:10.143 C0 C1 04 0C 01 17 01 00 03 01 64 00 00 00 C9 00 7B 6C
10:56:10.143 00 00 00 FF FF
10:56:10.143 step: 4
10:56:10.143 - Read a single fragment response w/ sequence(0x01)
10:56:10.143 - Verify the response contains the exact object header:
10:56:10.143 - g12v1, 1-Byte Count and Index, count: 1
10:56:10.143 - [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 201 status: 2 (NO_SELECT)
10:56:10.143 <-P-- 05 64 1A 44 01 00 00 04 A6 F0
10:56:10.143 C1 C1 81 90 00 0C 01 17 01 00 03 01 64 00 00 00 08 B9
10:56:10.143 C9 00 00 00 02 C2 B4
10:56:10.143 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 26 dest: 1 src: 1024
10:56:10.143 <-T-- fir: 1 fin: 1 seq: 1
10:56:10.144 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 IIN(DeviceRestart, NeedTime)
10:56:10.144 g12v1, 1-Byte Count and Index, count: 1
10:56:10.144 [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 201 status: 2 (NO_SELECT)
10:56:10.144 step: 5
10:56:10.144 - Check that no binary control point operated
10:56:11.145 [PLG] Binary output did NOT operate
10:56:11.145 Passed procedure: 8.2.1.2.7