| 10:56:25.132 | Running procedure: 8.2.3.2.2 | |
| 10:56:25.133 | This procedure is enabled because the following options: | |
| 10:56:25.133 | - supports.binaryOutput.commands == true | |
| 10:56:25.133 | step: 1 | |
| 10:56:25.133 | - Direct Operate No Ack(0x06) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 | |
| 10:56:25.133 | - g12v1, 2-Byte Count and Index, count: 1 | |
| 10:56:25.133 | - [65535] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS) | |
| 10:56:25.134 | --A-> | Direct Operate No Ack(0x06) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 |
| 10:56:25.134 | g12v1, 2-Byte Count and Index, count: 1 | |
| 10:56:25.134 | [65535] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS) | |
| 10:56:25.134 | --T-> | fir: 1 fin: 1 seq: 0 |
| 10:56:25.134 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 26 dest: 1024 src: 1 |
| 10:56:25.134 | --P-> | 05 64 1A C4 00 04 01 00 EC 47 |
| 10:56:25.134 | C0 C0 06 0C 01 28 01 00 FF FF 03 01 64 00 00 00 49 0B | |
| 10:56:25.134 | C8 00 00 00 00 78 FB | |
| 10:56:25.134 | step: 2 | |
| 10:56:25.134 | - Verify that no link layer frames are received within 2000 ms | |
| 10:56:27.136 | frame receive timeout | |
| 10:56:27.137 | step: 3 | |
| 10:56:27.137 | - Check that no binary control point operated | |
| 10:56:28.138 | [PLG] | Binary output did NOT operate |
| 10:56:28.138 | Passed procedure: 8.2.3.2.2 |