10:56:28.359		Running procedure: 8.2.3.2.3
10:56:28.360		This procedure is enabled because the following options:
10:56:28.360		- supports.binaryOutput.commands == true
10:56:28.360		- supports.disable.binaryOutput == true
10:56:28.360		step: 1
10:56:28.360		- The DUT's binary outputs can be uninstalled or disabled through its configuration
10:56:28.360		step: 2
10:56:28.360		- Uninstall or disable every binary output point on the DUT
10:56:28.360	[PLG]	All binary output status points were uninstalled
10:56:28.360	[PLG]	Cycling power
10:56:28.361		step: 3
10:56:28.361		- Direct Operate No Ack(0x06) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
10:56:28.361		- g12v1, 2-Byte Count and Index, count: 1
10:56:28.361		- [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:28.361	--A->	Direct Operate No Ack(0x06) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
10:56:28.361		g12v1, 2-Byte Count and Index, count: 1
10:56:28.361		[0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:28.361	--T->	fir: 1 fin: 1 seq: 0
10:56:28.361	--L->	master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 26 dest: 1024 src: 1
10:56:28.361	--P->	05 64 1A C4 00 04 01 00 EC 47
10:56:28.361		C0 C0 06 0C 01 28 01 00 00 00 03 01 64 00 00 00 CD AE
10:56:28.361		C8 00 00 00 00 78 FB
10:56:28.362		step: 4
10:56:28.362		- Verify that no link layer frames are received within 2000 ms
10:56:30.363		frame receive timeout
10:56:30.363		step: 5
10:56:30.363		- Check that no binary control point operated
10:56:31.364	[PLG]	Binary output did NOT operate
10:56:31.364		Passed procedure: 8.2.3.2.3
10:56:31.364		restore
10:56:31.364		- Reinstall or re-enable the points that were uninstalled or disabled, so later procedures can use them
10:56:31.364	[PLG]	All points were reinstalled
10:56:31.364	[PLG]	Cycling power