| 10:56:31.841 | Running procedure: 8.2.5.2.1 | |
| 10:56:31.844 | This procedure is enabled because the following options: | |
| 10:56:31.844 | - supports.binaryOutput.commands == true | |
| 10:56:31.844 | step: 3 | |
| 10:56:31.844 | - DUT supports Latch On/NUL and Latch Off/NUL pair. | |
| 10:56:31.844 | step: 4 | |
| 10:56:31.844 | - Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 | |
| 10:56:31.844 | - g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:31.844 | - [2] - code: 0x03 (LATCH_ON, NUL) count: 10 onTime: 500 offTime: 600 status: 0 (SUCCESS) | |
| 10:56:31.844 | - Read a single fragment response w/ sequence(0x01) | |
| 10:56:31.844 | - Verify the response contains the exact object header: | |
| 10:56:31.844 | - g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:31.844 | - [2] - code: 0x03 (LATCH_ON, NUL) count: 10 onTime: 500 offTime: 600 status: 0 (SUCCESS) | |
| 10:56:31.844 | - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported) | |
| 10:56:31.845 | --A-> | Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 |
| 10:56:31.845 | g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:31.845 | [2] - code: 0x03 (LATCH_ON, NUL) count: 10 onTime: 500 offTime: 600 status: 0 (SUCCESS) | |
| 10:56:31.845 | --T-> | fir: 1 fin: 1 seq: 0 |
| 10:56:31.845 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 24 dest: 1024 src: 1 |
| 10:56:31.845 | --P-> | 05 64 18 C4 00 04 01 00 5B 61 |
| 10:56:31.845 | C0 C1 05 0C 01 17 01 02 03 0A F4 01 00 00 58 02 85 6B | |
| 10:56:31.845 | 00 00 00 FF FF | |
| 10:56:31.845 | <-P-- | 05 64 1A 44 01 00 00 04 A6 F0 |
| 10:56:31.845 | C0 C1 81 90 00 0C 01 17 01 02 03 0A F4 01 00 00 40 C8 | |
| 10:56:31.845 | 58 02 00 00 00 37 F8 | |
| 10:56:31.845 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 26 dest: 1 src: 1024 |
| 10:56:31.845 | <-T-- | fir: 1 fin: 1 seq: 0 |
| 10:56:31.846 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 IIN(DeviceRestart, NeedTime) |
| 10:56:31.846 | g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:31.846 | [2] - code: 0x03 (LATCH_ON, NUL) count: 10 onTime: 500 offTime: 600 status: 0 (SUCCESS) | |
| 10:56:31.846 | step: 5 | |
| 10:56:31.846 | - Check that binary control point 2 operate | |
| 10:56:31.846 | [PLG] | Binary output 2 did operate |
| 10:56:31.846 | step: 6 | |
| 10:56:31.846 | - Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 | |
| 10:56:31.846 | - g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:31.846 | - [2] - code: 0x04 (LATCH_OFF, NUL) count: 10 onTime: 500 offTime: 600 status: 0 (SUCCESS) | |
| 10:56:31.846 | - Read a single fragment response w/ sequence(0x02) | |
| 10:56:31.846 | - Verify the response contains the exact object header: | |
| 10:56:31.846 | - g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:31.846 | - [2] - code: 0x04 (LATCH_OFF, NUL) count: 10 onTime: 500 offTime: 600 status: 0 (SUCCESS) | |
| 10:56:31.846 | - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported) | |
| 10:56:31.846 | --A-> | Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 |
| 10:56:31.846 | g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:31.846 | [2] - code: 0x04 (LATCH_OFF, NUL) count: 10 onTime: 500 offTime: 600 status: 0 (SUCCESS) | |
| 10:56:31.846 | --T-> | fir: 1 fin: 1 seq: 0 |
| 10:56:31.846 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 24 dest: 1024 src: 1 |
| 10:56:31.846 | --P-> | 05 64 18 C4 00 04 01 00 5B 61 |
| 10:56:31.846 | C0 C2 05 0C 01 17 01 02 04 0A F4 01 00 00 58 02 D3 BB | |
| 10:56:31.846 | 00 00 00 FF FF | |
| 10:56:31.846 | <-P-- | 05 64 1A 44 01 00 00 04 A6 F0 |
| 10:56:31.846 | C1 C2 81 90 00 0C 01 17 01 02 04 0A F4 01 00 00 DA E9 | |
| 10:56:31.846 | 58 02 00 00 00 37 F8 | |
| 10:56:31.846 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 26 dest: 1 src: 1024 |
| 10:56:31.846 | <-T-- | fir: 1 fin: 1 seq: 1 |
| 10:56:31.847 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 IIN(DeviceRestart, NeedTime) |
| 10:56:31.847 | g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:31.847 | [2] - code: 0x04 (LATCH_OFF, NUL) count: 10 onTime: 500 offTime: 600 status: 0 (SUCCESS) | |
| 10:56:31.847 | step: 7 | |
| 10:56:31.847 | - Check that binary control point 2 operate | |
| 10:56:31.847 | [PLG] | Binary output 2 did operate |
| 10:56:31.847 | step: 8 | |
| 10:56:31.847 | - DUT supports Pulse On/Close and Pulse On/Trip pair. | |
| 10:56:31.847 | step: 9 | |
| 10:56:31.847 | - Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03 | |
| 10:56:31.847 | - g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:31.847 | - [3] - code: 0x41 (PULSE_ON, CLOSE) count: 15 onTime: 700 offTime: 800 status: 0 (SUCCESS) | |
| 10:56:31.847 | - Read a single fragment response w/ sequence(0x03) | |
| 10:56:31.847 | - Verify the response contains the exact object header: | |
| 10:56:31.847 | - g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:31.847 | - [3] - code: 0x41 (PULSE_ON, CLOSE) count: 15 onTime: 700 offTime: 800 status: 0 (SUCCESS) | |
| 10:56:31.847 | - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported) | |
| 10:56:31.847 | --A-> | Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03 |
| 10:56:31.847 | g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:31.847 | [3] - code: 0x41 (PULSE_ON, CLOSE) count: 15 onTime: 700 offTime: 800 status: 0 (SUCCESS) | |
| 10:56:31.847 | --T-> | fir: 1 fin: 1 seq: 0 |
| 10:56:31.847 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 24 dest: 1024 src: 1 |
| 10:56:31.847 | --P-> | 05 64 18 C4 00 04 01 00 5B 61 |
| 10:56:31.847 | C0 C3 05 0C 01 17 01 03 41 0F BC 02 00 00 20 03 EC 14 | |
| 10:56:31.847 | 00 00 00 FF FF | |
| 10:56:31.847 | <-P-- | 05 64 1A 44 01 00 00 04 A6 F0 |
| 10:56:31.847 | C2 C3 81 90 00 0C 01 17 01 03 41 0F BC 02 00 00 57 2E | |
| 10:56:31.847 | 20 03 00 00 00 E3 ED | |
| 10:56:31.847 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 26 dest: 1 src: 1024 |
| 10:56:31.847 | <-T-- | fir: 1 fin: 1 seq: 2 |
| 10:56:31.847 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03 IIN(DeviceRestart, NeedTime) |
| 10:56:31.847 | g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:31.847 | [3] - code: 0x41 (PULSE_ON, CLOSE) count: 15 onTime: 700 offTime: 800 status: 0 (SUCCESS) | |
| 10:56:31.847 | step: 10 | |
| 10:56:31.847 | - Check that binary control point 3 operate | |
| 10:56:31.848 | [PLG] | Binary output 3 did operate |
| 10:56:31.848 | step: 11 | |
| 10:56:31.848 | - Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x04 | |
| 10:56:31.848 | - g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:31.848 | - [3] - code: 0x81 (PULSE_ON, TRIP) count: 15 onTime: 700 offTime: 800 status: 0 (SUCCESS) | |
| 10:56:31.848 | - Read a single fragment response w/ sequence(0x04) | |
| 10:56:31.848 | - Verify the response contains the exact object header: | |
| 10:56:31.848 | - g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:31.848 | - [3] - code: 0x81 (PULSE_ON, TRIP) count: 15 onTime: 700 offTime: 800 status: 0 (SUCCESS) | |
| 10:56:31.848 | - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported) | |
| 10:56:31.848 | --A-> | Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x04 |
| 10:56:31.848 | g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:31.848 | [3] - code: 0x81 (PULSE_ON, TRIP) count: 15 onTime: 700 offTime: 800 status: 0 (SUCCESS) | |
| 10:56:31.848 | --T-> | fir: 1 fin: 1 seq: 0 |
| 10:56:31.848 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 24 dest: 1024 src: 1 |
| 10:56:31.848 | --P-> | 05 64 18 C4 00 04 01 00 5B 61 |
| 10:56:31.848 | C0 C4 05 0C 01 17 01 03 81 0F BC 02 00 00 20 03 08 CD | |
| 10:56:31.848 | 00 00 00 FF FF | |
| 10:56:31.848 | <-P-- | 05 64 1A 44 01 00 00 04 A6 F0 |
| 10:56:31.848 | C3 C4 81 90 00 0C 01 17 01 03 81 0F BC 02 00 00 14 9B | |
| 10:56:31.848 | 20 03 00 00 00 E3 ED | |
| 10:56:31.848 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 26 dest: 1 src: 1024 |
| 10:56:31.848 | <-T-- | fir: 1 fin: 1 seq: 3 |
| 10:56:31.848 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x04 IIN(DeviceRestart, NeedTime) |
| 10:56:31.848 | g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:31.848 | [3] - code: 0x81 (PULSE_ON, TRIP) count: 15 onTime: 700 offTime: 800 status: 0 (SUCCESS) | |
| 10:56:31.848 | step: 12 | |
| 10:56:31.848 | - Check that binary control point 3 operate | |
| 10:56:31.848 | [PLG] | Binary output 3 did operate |
| 10:56:31.848 | step: 13 | |
| 10:56:31.848 | - DUT supports both Latch On/NUL and Latch Off/NUL pair and Pulse On/Close and Pulse On/Trip pair. | |
| 10:56:31.848 | step: 14 | |
| 10:56:31.848 | - Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x05 | |
| 10:56:31.848 | - g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:31.848 | - [4] - code: 0x03 (LATCH_ON, NUL) count: 20 onTime: 900 offTime: 1000 status: 0 (SUCCESS) | |
| 10:56:31.848 | - Read a single fragment response w/ sequence(0x05) | |
| 10:56:31.848 | - Verify the response contains the exact object header: | |
| 10:56:31.848 | - g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:31.848 | - [4] - code: 0x03 (LATCH_ON, NUL) count: 20 onTime: 900 offTime: 1000 status: 0 (SUCCESS) | |
| 10:56:31.848 | - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported) | |
| 10:56:31.848 | --A-> | Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x05 |
| 10:56:31.848 | g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:31.848 | [4] - code: 0x03 (LATCH_ON, NUL) count: 20 onTime: 900 offTime: 1000 status: 0 (SUCCESS) | |
| 10:56:31.849 | --T-> | fir: 1 fin: 1 seq: 0 |
| 10:56:31.849 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 24 dest: 1024 src: 1 |
| 10:56:31.849 | --P-> | 05 64 18 C4 00 04 01 00 5B 61 |
| 10:56:31.849 | C0 C5 05 0C 01 17 01 04 03 14 84 03 00 00 E8 03 B9 8E | |
| 10:56:31.849 | 00 00 00 FF FF | |
| 10:56:31.849 | <-P-- | 05 64 1A 44 01 00 00 04 A6 F0 |
| 10:56:31.849 | C4 C5 81 90 00 0C 01 17 01 04 03 14 84 03 00 00 E4 6C | |
| 10:56:31.849 | E8 03 00 00 00 64 E9 | |
| 10:56:31.849 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 26 dest: 1 src: 1024 |
| 10:56:31.849 | <-T-- | fir: 1 fin: 1 seq: 4 |
| 10:56:31.849 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x05 IIN(DeviceRestart, NeedTime) |
| 10:56:31.849 | g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:31.849 | [4] - code: 0x03 (LATCH_ON, NUL) count: 20 onTime: 900 offTime: 1000 status: 0 (SUCCESS) | |
| 10:56:31.849 | step: 15 | |
| 10:56:31.849 | - Check that binary control point 4 operate | |
| 10:56:31.849 | [PLG] | Binary output 4 did operate |
| 10:56:31.849 | step: 16 | |
| 10:56:31.849 | - Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x06 | |
| 10:56:31.849 | - g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:31.849 | - [4] - code: 0x81 (PULSE_ON, TRIP) count: 20 onTime: 900 offTime: 1000 status: 0 (SUCCESS) | |
| 10:56:31.849 | - Read a single fragment response w/ sequence(0x06) | |
| 10:56:31.849 | - Verify the response contains the exact object header: | |
| 10:56:31.849 | - g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:31.849 | - [4] - code: 0x81 (PULSE_ON, TRIP) count: 20 onTime: 900 offTime: 1000 status: 0 (SUCCESS) | |
| 10:56:31.849 | - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported) | |
| 10:56:31.849 | --A-> | Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x06 |
| 10:56:31.849 | g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:31.849 | [4] - code: 0x81 (PULSE_ON, TRIP) count: 20 onTime: 900 offTime: 1000 status: 0 (SUCCESS) | |
| 10:56:31.849 | --T-> | fir: 1 fin: 1 seq: 0 |
| 10:56:31.849 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 24 dest: 1024 src: 1 |
| 10:56:31.850 | --P-> | 05 64 18 C4 00 04 01 00 5B 61 |
| 10:56:31.850 | C0 C6 05 0C 01 17 01 04 81 14 84 03 00 00 E8 03 04 3F | |
| 10:56:31.850 | 00 00 00 FF FF | |
| 10:56:31.850 | <-P-- | 05 64 1A 44 01 00 00 04 A6 F0 |
| 10:56:31.850 | C5 C6 81 90 00 0C 01 17 01 04 81 14 84 03 00 00 74 A4 | |
| 10:56:31.850 | E8 03 00 00 00 64 E9 | |
| 10:56:31.850 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 26 dest: 1 src: 1024 |
| 10:56:31.850 | <-T-- | fir: 1 fin: 1 seq: 5 |
| 10:56:31.850 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x06 IIN(DeviceRestart, NeedTime) |
| 10:56:31.850 | g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:31.850 | [4] - code: 0x81 (PULSE_ON, TRIP) count: 20 onTime: 900 offTime: 1000 status: 0 (SUCCESS) | |
| 10:56:31.850 | step: 17 | |
| 10:56:31.850 | - Check that binary control point 4 operate | |
| 10:56:31.850 | [PLG] | Binary output 4 did operate |
| 10:56:31.850 | step: 18 | |
| 10:56:31.850 | - Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x07 | |
| 10:56:31.850 | - g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:31.850 | - [4] - code: 0x41 (PULSE_ON, CLOSE) count: 20 onTime: 900 offTime: 1000 status: 0 (SUCCESS) | |
| 10:56:31.850 | - Read a single fragment response w/ sequence(0x07) | |
| 10:56:31.850 | - Verify the response contains the exact object header: | |
| 10:56:31.850 | - g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:31.850 | - [4] - code: 0x41 (PULSE_ON, CLOSE) count: 20 onTime: 900 offTime: 1000 status: 0 (SUCCESS) | |
| 10:56:31.850 | - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported) | |
| 10:56:31.850 | --A-> | Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x07 |
| 10:56:31.850 | g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:31.850 | [4] - code: 0x41 (PULSE_ON, CLOSE) count: 20 onTime: 900 offTime: 1000 status: 0 (SUCCESS) | |
| 10:56:31.851 | --T-> | fir: 1 fin: 1 seq: 0 |
| 10:56:31.851 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 24 dest: 1024 src: 1 |
| 10:56:31.851 | --P-> | 05 64 18 C4 00 04 01 00 5B 61 |
| 10:56:31.851 | C0 C7 05 0C 01 17 01 04 41 14 84 03 00 00 E8 03 C9 CF | |
| 10:56:31.851 | 00 00 00 FF FF | |
| 10:56:31.851 | <-P-- | 05 64 1A 44 01 00 00 04 A6 F0 |
| 10:56:31.851 | C6 C7 81 90 00 0C 01 17 01 04 41 14 84 03 00 00 06 A3 | |
| 10:56:31.851 | E8 03 00 00 00 64 E9 | |
| 10:56:31.851 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 26 dest: 1 src: 1024 |
| 10:56:31.851 | <-T-- | fir: 1 fin: 1 seq: 6 |
| 10:56:31.851 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x07 IIN(DeviceRestart, NeedTime) |
| 10:56:31.851 | g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:31.851 | [4] - code: 0x41 (PULSE_ON, CLOSE) count: 20 onTime: 900 offTime: 1000 status: 0 (SUCCESS) | |
| 10:56:31.851 | step: 19 | |
| 10:56:31.851 | - Check that binary control point 4 operate | |
| 10:56:31.851 | [PLG] | Binary output 4 did operate |
| 10:56:31.851 | step: 20 | |
| 10:56:31.851 | - Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x08 | |
| 10:56:31.851 | - g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:31.851 | - [4] - code: 0x04 (LATCH_OFF, NUL) count: 20 onTime: 900 offTime: 1000 status: 0 (SUCCESS) | |
| 10:56:31.851 | - Read a single fragment response w/ sequence(0x08) | |
| 10:56:31.851 | - Verify the response contains the exact object header: | |
| 10:56:31.851 | - g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:31.851 | - [4] - code: 0x04 (LATCH_OFF, NUL) count: 20 onTime: 900 offTime: 1000 status: 0 (SUCCESS) | |
| 10:56:31.851 | - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported) | |
| 10:56:31.851 | --A-> | Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x08 |
| 10:56:31.851 | g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:31.851 | [4] - code: 0x04 (LATCH_OFF, NUL) count: 20 onTime: 900 offTime: 1000 status: 0 (SUCCESS) | |
| 10:56:31.852 | --T-> | fir: 1 fin: 1 seq: 0 |
| 10:56:31.852 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 24 dest: 1024 src: 1 |
| 10:56:31.852 | --P-> | 05 64 18 C4 00 04 01 00 5B 61 |
| 10:56:31.852 | C0 C8 05 0C 01 17 01 04 04 14 84 03 00 00 E8 03 8D D0 | |
| 10:56:31.852 | 00 00 00 FF FF | |
| 10:56:31.852 | <-P-- | 05 64 1A 44 01 00 00 04 A6 F0 |
| 10:56:31.852 | C7 C8 81 90 00 0C 01 17 01 04 04 14 84 03 00 00 04 58 | |
| 10:56:31.852 | E8 03 00 00 00 64 E9 | |
| 10:56:31.852 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 26 dest: 1 src: 1024 |
| 10:56:31.852 | <-T-- | fir: 1 fin: 1 seq: 7 |
| 10:56:31.852 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x08 IIN(DeviceRestart, NeedTime) |
| 10:56:31.852 | g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:31.852 | [4] - code: 0x04 (LATCH_OFF, NUL) count: 20 onTime: 900 offTime: 1000 status: 0 (SUCCESS) | |
| 10:56:31.852 | step: 21 | |
| 10:56:31.852 | - Check that binary control point 4 operate | |
| 10:56:31.852 | [PLG] | Binary output 4 did operate |
| 10:56:31.852 | Passed procedure: 8.2.5.2.1 |