| 10:56:32.079 | Running procedure: 8.2.5.2.2 | |
| 10:56:32.082 | This procedure is enabled because the following options: | |
| 10:56:32.082 | - supports.binaryOutput.commands == true | |
| 10:56:32.082 | step: 3 | |
| 10:56:32.082 | - The plugin knows what each control below should do, and checks that it happened | |
| 10:56:32.082 | step: 4 | |
| 10:56:32.082 | - DUT supports the 0x01 (Pulse On/NUL) control code for single function binary output point at index 5. | |
| 10:56:32.083 | step: 5 | |
| 10:56:32.083 | - Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 | |
| 10:56:32.083 | - g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:32.083 | - [5] - code: 0x01 (PULSE_ON, NUL) count: 25 onTime: 1100 offTime: 1200 status: 0 (SUCCESS) | |
| 10:56:32.083 | - Read a single fragment response w/ sequence(0x01) | |
| 10:56:32.083 | - Verify the response contains the exact object header: | |
| 10:56:32.083 | - g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:32.083 | - [5] - code: 0x01 (PULSE_ON, NUL) count: 25 onTime: 1100 offTime: 1200 status: 0 (SUCCESS) | |
| 10:56:32.083 | - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported) | |
| 10:56:32.083 | --A-> | Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 |
| 10:56:32.083 | g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:32.083 | [5] - code: 0x01 (PULSE_ON, NUL) count: 25 onTime: 1100 offTime: 1200 status: 0 (SUCCESS) | |
| 10:56:32.083 | --T-> | fir: 1 fin: 1 seq: 0 |
| 10:56:32.083 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 24 dest: 1024 src: 1 |
| 10:56:32.084 | --P-> | 05 64 18 C4 00 04 01 00 5B 61 |
| 10:56:32.084 | C0 C1 05 0C 01 17 01 05 01 19 4C 04 00 00 B0 04 09 D3 | |
| 10:56:32.084 | 00 00 00 FF FF | |
| 10:56:32.084 | <-P-- | 05 64 1A 44 01 00 00 04 A6 F0 |
| 10:56:32.084 | C0 C1 81 90 00 0C 01 17 01 05 01 19 4C 04 00 00 83 D2 | |
| 10:56:32.084 | B0 04 00 00 00 6F F0 | |
| 10:56:32.084 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 26 dest: 1 src: 1024 |
| 10:56:32.084 | <-T-- | fir: 1 fin: 1 seq: 0 |
| 10:56:32.085 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 IIN(DeviceRestart, NeedTime) |
| 10:56:32.085 | g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:32.085 | [5] - code: 0x01 (PULSE_ON, NUL) count: 25 onTime: 1100 offTime: 1200 status: 0 (SUCCESS) | |
| 10:56:32.085 | step: 6 | |
| 10:56:32.085 | - Check that binary control point 5 operate | |
| 10:56:32.085 | [PLG] | Binary output 5 did operate |
| 10:56:32.085 | step: 7 | |
| 10:56:32.085 | - DUT supports the 0x03 (Latch On/NUL) control code for single function binary output point at index 6. | |
| 10:56:32.085 | step: 8 | |
| 10:56:32.085 | - Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 | |
| 10:56:32.085 | - g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:32.085 | - [6] - code: 0x03 (LATCH_ON, NUL) count: 30 onTime: 1300 offTime: 1400 status: 0 (SUCCESS) | |
| 10:56:32.085 | - Read a single fragment response w/ sequence(0x02) | |
| 10:56:32.085 | - Verify the response contains the exact object header: | |
| 10:56:32.085 | - g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:32.085 | - [6] - code: 0x03 (LATCH_ON, NUL) count: 30 onTime: 1300 offTime: 1400 status: 0 (SUCCESS) | |
| 10:56:32.085 | - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported) | |
| 10:56:32.085 | --A-> | Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 |
| 10:56:32.085 | g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:32.085 | [6] - code: 0x03 (LATCH_ON, NUL) count: 30 onTime: 1300 offTime: 1400 status: 0 (SUCCESS) | |
| 10:56:32.085 | --T-> | fir: 1 fin: 1 seq: 0 |
| 10:56:32.085 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 24 dest: 1024 src: 1 |
| 10:56:32.085 | --P-> | 05 64 18 C4 00 04 01 00 5B 61 |
| 10:56:32.085 | C0 C2 05 0C 01 17 01 06 03 1E 14 05 00 00 78 05 C0 34 | |
| 10:56:32.085 | 00 00 00 FF FF | |
| 10:56:32.086 | <-P-- | 05 64 1A 44 01 00 00 04 A6 F0 |
| 10:56:32.086 | C1 C2 81 90 00 0C 01 17 01 06 03 1E 14 05 00 00 FA 4E | |
| 10:56:32.086 | 78 05 00 00 00 00 36 | |
| 10:56:32.086 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 26 dest: 1 src: 1024 |
| 10:56:32.086 | <-T-- | fir: 1 fin: 1 seq: 1 |
| 10:56:32.086 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 IIN(DeviceRestart, NeedTime) |
| 10:56:32.086 | g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:32.086 | [6] - code: 0x03 (LATCH_ON, NUL) count: 30 onTime: 1300 offTime: 1400 status: 0 (SUCCESS) | |
| 10:56:32.086 | step: 9 | |
| 10:56:32.086 | - Check that binary control point 6 operate | |
| 10:56:32.086 | [PLG] | Binary output 6 did operate |
| 10:56:32.086 | step: 10 | |
| 10:56:32.086 | - DUT supports the 0x04 (Latch Off/NUL) control code for single function binary output point at index 7. | |
| 10:56:32.086 | step: 11 | |
| 10:56:32.086 | - Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03 | |
| 10:56:32.086 | - g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:32.086 | - [7] - code: 0x04 (LATCH_OFF, NUL) count: 35 onTime: 1500 offTime: 1600 status: 0 (SUCCESS) | |
| 10:56:32.086 | - Read a single fragment response w/ sequence(0x03) | |
| 10:56:32.086 | - Verify the response contains the exact object header: | |
| 10:56:32.086 | - g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:32.086 | - [7] - code: 0x04 (LATCH_OFF, NUL) count: 35 onTime: 1500 offTime: 1600 status: 0 (SUCCESS) | |
| 10:56:32.086 | - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported) | |
| 10:56:32.086 | --A-> | Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03 |
| 10:56:32.086 | g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:32.086 | [7] - code: 0x04 (LATCH_OFF, NUL) count: 35 onTime: 1500 offTime: 1600 status: 0 (SUCCESS) | |
| 10:56:32.086 | --T-> | fir: 1 fin: 1 seq: 0 |
| 10:56:32.086 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 24 dest: 1024 src: 1 |
| 10:56:32.086 | --P-> | 05 64 18 C4 00 04 01 00 5B 61 |
| 10:56:32.086 | C0 C3 05 0C 01 17 01 07 04 23 DC 05 00 00 40 06 76 DD | |
| 10:56:32.086 | 00 00 00 FF FF | |
| 10:56:32.087 | <-P-- | 05 64 1A 44 01 00 00 04 A6 F0 |
| 10:56:32.087 | C2 C3 81 90 00 0C 01 17 01 07 04 23 DC 05 00 00 2F C0 | |
| 10:56:32.087 | 40 06 00 00 00 C7 DB | |
| 10:56:32.087 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 26 dest: 1 src: 1024 |
| 10:56:32.087 | <-T-- | fir: 1 fin: 1 seq: 2 |
| 10:56:32.087 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03 IIN(DeviceRestart, NeedTime) |
| 10:56:32.087 | g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:32.087 | [7] - code: 0x04 (LATCH_OFF, NUL) count: 35 onTime: 1500 offTime: 1600 status: 0 (SUCCESS) | |
| 10:56:32.087 | step: 12 | |
| 10:56:32.087 | - Check that binary control point 7 operate | |
| 10:56:32.087 | [PLG] | Binary output 7 did operate |
| 10:56:32.087 | step: 13 | |
| 10:56:32.087 | - DUT supports the 0x41 (Pulse On/Close) control code for single function binary output point at index 8. | |
| 10:56:32.087 | step: 14 | |
| 10:56:32.087 | - Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x04 | |
| 10:56:32.087 | - g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:32.087 | - [8] - code: 0x41 (PULSE_ON, CLOSE) count: 40 onTime: 1700 offTime: 1800 status: 0 (SUCCESS) | |
| 10:56:32.087 | - Read a single fragment response w/ sequence(0x04) | |
| 10:56:32.087 | - Verify the response contains the exact object header: | |
| 10:56:32.087 | - g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:32.087 | - [8] - code: 0x41 (PULSE_ON, CLOSE) count: 40 onTime: 1700 offTime: 1800 status: 0 (SUCCESS) | |
| 10:56:32.087 | - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported) | |
| 10:56:32.087 | --A-> | Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x04 |
| 10:56:32.087 | g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:32.087 | [8] - code: 0x41 (PULSE_ON, CLOSE) count: 40 onTime: 1700 offTime: 1800 status: 0 (SUCCESS) | |
| 10:56:32.087 | --T-> | fir: 1 fin: 1 seq: 0 |
| 10:56:32.087 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 24 dest: 1024 src: 1 |
| 10:56:32.088 | --P-> | 05 64 18 C4 00 04 01 00 5B 61 |
| 10:56:32.088 | C0 C4 05 0C 01 17 01 08 41 28 A4 06 00 00 08 07 E6 59 | |
| 10:56:32.088 | 00 00 00 FF FF | |
| 10:56:32.088 | <-P-- | 05 64 1A 44 01 00 00 04 A6 F0 |
| 10:56:32.088 | C3 C4 81 90 00 0C 01 17 01 08 41 28 A4 06 00 00 09 61 | |
| 10:56:32.088 | 08 07 00 00 00 DC 7C | |
| 10:56:32.088 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 26 dest: 1 src: 1024 |
| 10:56:32.088 | <-T-- | fir: 1 fin: 1 seq: 3 |
| 10:56:32.088 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x04 IIN(DeviceRestart, NeedTime) |
| 10:56:32.088 | g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:32.088 | [8] - code: 0x41 (PULSE_ON, CLOSE) count: 40 onTime: 1700 offTime: 1800 status: 0 (SUCCESS) | |
| 10:56:32.088 | step: 15 | |
| 10:56:32.088 | - Check that binary control point 8 operate | |
| 10:56:32.088 | [PLG] | Binary output 8 did operate |
| 10:56:32.088 | step: 16 | |
| 10:56:32.088 | - DUT supports the 0x81 (Pulse On/Trip) control code for single function binary output point at index 9. | |
| 10:56:32.088 | step: 17 | |
| 10:56:32.088 | - Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x05 | |
| 10:56:32.088 | - g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:32.088 | - [9] - code: 0x81 (PULSE_ON, TRIP) count: 45 onTime: 1900 offTime: 2000 status: 0 (SUCCESS) | |
| 10:56:32.088 | - Read a single fragment response w/ sequence(0x05) | |
| 10:56:32.088 | - Verify the response contains the exact object header: | |
| 10:56:32.088 | - g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:32.088 | - [9] - code: 0x81 (PULSE_ON, TRIP) count: 45 onTime: 1900 offTime: 2000 status: 0 (SUCCESS) | |
| 10:56:32.088 | - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported) | |
| 10:56:32.088 | --A-> | Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x05 |
| 10:56:32.088 | g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:32.088 | [9] - code: 0x81 (PULSE_ON, TRIP) count: 45 onTime: 1900 offTime: 2000 status: 0 (SUCCESS) | |
| 10:56:32.088 | --T-> | fir: 1 fin: 1 seq: 0 |
| 10:56:32.088 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 24 dest: 1024 src: 1 |
| 10:56:32.089 | --P-> | 05 64 18 C4 00 04 01 00 5B 61 |
| 10:56:32.089 | C0 C5 05 0C 01 17 01 09 81 2D 6C 07 00 00 D0 07 E5 1E | |
| 10:56:32.089 | 00 00 00 FF FF | |
| 10:56:32.089 | <-P-- | 05 64 1A 44 01 00 00 04 A6 F0 |
| 10:56:32.089 | C4 C5 81 90 00 0C 01 17 01 09 81 2D 6C 07 00 00 6B 0B | |
| 10:56:32.089 | D0 07 00 00 00 C9 D2 | |
| 10:56:32.089 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 26 dest: 1 src: 1024 |
| 10:56:32.089 | <-T-- | fir: 1 fin: 1 seq: 4 |
| 10:56:32.089 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x05 IIN(DeviceRestart, NeedTime) |
| 10:56:32.089 | g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:32.089 | [9] - code: 0x81 (PULSE_ON, TRIP) count: 45 onTime: 1900 offTime: 2000 status: 0 (SUCCESS) | |
| 10:56:32.089 | step: 18 | |
| 10:56:32.089 | - Check that binary control point 9 operate | |
| 10:56:32.089 | [PLG] | Binary output 9 did operate |
| 10:56:32.089 | Passed procedure: 8.2.5.2.2 |