| 10:56:32.322 | Running procedure: 8.2.6 | |
| 10:56:32.324 | This procedure is enabled because the following options: | |
| 10:56:32.324 | - supports.binaryOutput.commands == true | |
| 10:56:32.324 | step: 1 | |
| 10:56:32.324 | - Select(0x03) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 | |
| 10:56:32.324 | - g12v1, 2-Byte Count and Index, count: 1 | |
| 10:56:32.324 | - [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 126 (NON_PARTICIPATING) | |
| 10:56:32.324 | --A-> | Select(0x03) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 |
| 10:56:32.324 | g12v1, 2-Byte Count and Index, count: 1 | |
| 10:56:32.324 | [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 126 (NON_PARTICIPATING) | |
| 10:56:32.324 | --T-> | fir: 1 fin: 1 seq: 0 |
| 10:56:32.324 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 26 dest: 1024 src: 1 |
| 10:56:32.324 | --P-> | 05 64 1A C4 00 04 01 00 EC 47 |
| 10:56:32.324 | C0 C0 03 0C 01 28 01 00 00 00 03 01 64 00 00 00 FD 6B | |
| 10:56:32.324 | C8 00 00 00 7E AF 79 | |
| 10:56:32.325 | steps: 2 to 3 | |
| 10:56:32.325 | - Read a single fragment response w/ sequence(0x00) | |
| 10:56:32.325 | - Verify that the response echoes the select, but for its status code | |
| 10:56:32.325 | - Verify that the status code isn't zero; a DUT that answers with zero passes with a warning: it complies with IEEE 1815-2012, but not with IEEE 1815-202x | |
| 10:56:32.325 | - Verify that the IIN field has no error bits but IIN2.1 and IIN2.2, which are optional | |
| 10:56:32.325 | - Verify that the IIN field does not contain bits IIN(FuncNotSupported) | |
| 10:56:32.326 | <-P-- | 05 64 1C 44 01 00 00 04 7F 9B |
| 10:56:32.326 | C0 C0 81 90 00 0C 01 28 01 00 00 00 03 01 64 00 09 60 | |
| 10:56:32.326 | 00 00 C8 00 00 00 00 78 FB | |
| 10:56:32.326 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 28 dest: 1 src: 1024 |
| 10:56:32.326 | <-T-- | fir: 1 fin: 1 seq: 0 |
| 10:56:32.326 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 IIN(DeviceRestart, NeedTime) |
| 10:56:32.326 | g12v1, 2-Byte Count and Index, count: 1 | |
| 10:56:32.326 | [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS) | |
| 10:56:32.327 | Warning on the result: the DUT echoes a select whose status field isn't zero with status code 0: it complies with IEEE 1815-2012, but not with IEEE 1815-202x | |
| 10:56:32.327 | Passed procedure: 8.2.6 |