11:02:03.722		Running procedure: 8.21.1
11:02:03.723		step: 1
11:02:03.723		- Uninstall or disable every double-bit binary input point on the DUT
11:02:03.723	[PLG]	All double-bit binary input points were uninstalled
11:02:03.723	[PLG]	Cycling power
11:02:03.723		step: 2
11:02:03.723		- Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
11:02:03.723		- g3v0, All Objects
11:02:03.723	--A->	Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
11:02:03.723		g3v0, All Objects
11:02:03.723	--T->	fir: 1 fin: 1 seq: 0
11:02:03.724	--L->	master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
11:02:03.724	--P->	05 64 0B C4 00 04 01 00 CA 8A
11:02:03.724		C0 C1 01 03 00 06 2D 6F
11:02:03.724		step: 3
11:02:03.724		- Read a single fragment response w/ sequence(0x01)
11:02:03.724		- Verify that the response is empty
11:02:03.724		- Verify that the IIN field contains at least one of IIN(ParamError, ObjectUnknown)
11:02:03.724		- Verify that the IIN field does not contain bits IIN(FuncNotSupported)
11:02:03.725	<-P--	05 64 0A 44 01 00 00 04 67 88
11:02:03.725		C0 C1 81 90 02 CF 82
11:02:03.725	<-L--	master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024
11:02:03.725	<-T--	fir: 1 fin: 1 seq: 0
11:02:03.725	<-A--	Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 IIN(DeviceRestart, NeedTime, ObjectUnknown)
11:02:03.725		Passed procedure: 8.21.1
11:02:03.725		restore
11:02:03.725		- Reinstall or re-enable the points that were uninstalled or disabled, so later procedures can use them
11:02:03.725	[PLG]	All points were reinstalled
11:02:03.725	[PLG]	Cycling power