8.22m Double-bit Input Change with Relative Time, Qualifier 0x06 (as 8.14.2m) (revision 3.1r1, subset level 3)

Device under test: Step Function I/O dnp3 outstation

All results
11:02:18.940 Running procedure: 8.22m
11:02:18.941 This procedure is enabled because the following options:
11:02:18.941 - supports.doubleBitInput == true
11:02:18.941 - supports.doubleBitInputChangeEvents == true
11:02:18.941 - supports.doubleBitInputEventReads == true
11:02:18.941 step: 1
11:02:18.941 - Cycle power to the DUT
11:02:18.941 [PLG] Cycling power
11:02:18.942 step: 2
11:02:18.942 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
11:02:18.942 - g4v0, All Objects
11:02:18.942 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
11:02:18.942 g4v0, All Objects
11:02:18.942 --T-> fir: 1 fin: 1 seq: 0
11:02:18.942 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
11:02:18.942 --P-> 05 64 0B C4 00 04 01 00 CA 8A
11:02:18.942 C0 C0 01 04 00 06 03 00
11:02:18.942 steps: 3 to 4
11:02:18.942 - Read any number of valid responses beginning w/ sequence(0x00) and incrementing by 1 modulo 16
11:02:18.942 - If the response carries data, verify that it asks for an application layer confirmation.
11:02:18.942 - Note whether IIN1.4 (NEED_TIME) is set
11:02:18.942 - Confirm each response that asks for a confirmation
11:02:18.942 <-P-- 05 64 0A 44 01 00 00 04 67 88
11:02:18.942 C0 C0 81 90 00 9B 2C
11:02:18.942 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024
11:02:18.942 <-T-- fir: 1 fin: 1 seq: 0
11:02:18.943 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 IIN(DeviceRestart, NeedTime)
11:02:18.943 step: 5
11:02:18.943 - If IIN1.4 wasn't set in step 3's response, skip to step 19
11:02:18.943 step: 6
11:02:18.943 - Change double-bit binary inputs several times, one or more of them, to create events
11:02:18.943 - (Only if IIN1.4 was set in step 3's response)
11:02:18.943 [PLG] Updated DBBI 0: value=DETERMINED_ON, flags=81, timestamp=1793185338943 (UNSYNCHRONIZED_TIME)
11:02:18.943 [PLG] Updated DBBI 1: value=DETERMINED_ON, flags=81, timestamp=1793185338943 (UNSYNCHRONIZED_TIME)
11:02:18.943 [PLG] Updated DBBI 2: value=DETERMINED_ON, flags=81, timestamp=1793185338943 (UNSYNCHRONIZED_TIME)
11:02:18.943 [PLG] Updated DBBI 3: value=DETERMINED_ON, flags=81, timestamp=1793185338943 (UNSYNCHRONIZED_TIME)
11:02:18.943 [PLG] Updated DBBI 4: value=DETERMINED_ON, flags=81, timestamp=1793185338943 (UNSYNCHRONIZED_TIME)
11:02:18.943 [PLG] Updated DBBI 5: value=DETERMINED_ON, flags=81, timestamp=1793185338943 (UNSYNCHRONIZED_TIME)
11:02:18.943 [PLG] Updated DBBI 6: value=DETERMINED_ON, flags=81, timestamp=1793185338943 (UNSYNCHRONIZED_TIME)
11:02:18.943 [PLG] Updated DBBI 7: value=DETERMINED_ON, flags=81, timestamp=1793185338943 (UNSYNCHRONIZED_TIME)
11:02:18.943 [PLG] Updated DBBI 8: value=DETERMINED_ON, flags=81, timestamp=1793185338943 (UNSYNCHRONIZED_TIME)
11:02:18.943 [PLG] Updated DBBI 9: value=DETERMINED_ON, flags=81, timestamp=1793185338943 (UNSYNCHRONIZED_TIME)
11:02:18.943 The plugin reports the DUT's clock unsynchronized
11:02:18.943 step: 7
11:02:18.943 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
11:02:18.943 - g4v3, All Objects
11:02:18.943 - (Only if IIN1.4 was set in step 3's response)
11:02:18.943 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
11:02:18.943 g4v3, All Objects
11:02:18.943 --T-> fir: 1 fin: 1 seq: 0
11:02:18.943 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
11:02:18.943 --P-> 05 64 0B C4 00 04 01 00 CA 8A
11:02:18.943 C0 C1 01 04 03 06 AE 93
11:02:18.943 steps: 8 to 14
11:02:18.943 - Read a single fragment response w/ sequence(0x01)
11:02:18.943 - Verify that the response holds every Double-bit Binary event generated
11:02:18.943 - If the events carry timestamps, verify that the gaps between them match the gaps between when the events were generated, to the Device Profile's resolution
11:02:18.943 - Verify that an application layer confirmation is requested.
11:02:18.943 - Verify that the events are reported as 3.1r1's rules for event reporting require, for a read of g4v3, by the state of the DUT's clock when it recorded them, where the procedure or the plugin knows it
11:02:18.943 - Verify that the flags behave as the note on flags in Section 2 requires (Note 5 in 2.7, Note 6 in 3.1r1).
11:02:18.943 - Confirm each response that asks for a confirmation
11:02:18.943 - (Only if IIN1.4 was set in step 3's response)
11:02:18.943 <-P-- 05 64 4B 44 01 00 00 04 FD 93
11:02:18.943 C1 E1 81 90 00 33 02 07 01 3F D6 2C 82 A1 01 04 2F 82
11:02:18.943 03 28 0A 00 00 00 81 00 00 01 00 81 00 00 02 00 AC 42
11:02:18.943 81 00 00 03 00 81 00 00 04 00 81 00 00 05 00 81 9B 00
11:02:18.943 00 00 06 00 81 00 00 07 00 81 00 00 08 00 81 00 A9 FA
11:02:18.943 00 09 00 81 00 00 AF C5
11:02:18.944 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 75 dest: 1 src: 1024
11:02:18.944 <-T-- fir: 1 fin: 1 seq: 1
11:02:18.944 <-A-- Response(0x81) fir: 1 fin: 1 con: 1 uns: 0 seq: 0x01 IIN(DeviceRestart, NeedTime)
11:02:18.944 g51v2, 1-Byte Count, count: 1
11:02:18.944 time: 1793185338943
11:02:18.944 g4v3, 2-Byte Count and Index, count: 10
11:02:18.944 [0] - flags: 0x81 cto: 0
11:02:18.944 [1] - flags: 0x81 cto: 0
11:02:18.944 [2] - flags: 0x81 cto: 0
11:02:18.944 [3] - flags: 0x81 cto: 0
11:02:18.944 [4] - flags: 0x81 cto: 0
11:02:18.944 [5] - flags: 0x81 cto: 0
11:02:18.944 [6] - flags: 0x81 cto: 0
11:02:18.944 [7] - flags: 0x81 cto: 0
11:02:18.944 [8] - flags: 0x81 cto: 0
11:02:18.944 [9] - flags: 0x81 cto: 0
11:02:18.944 --A-> Confirm(0x00) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
11:02:18.944 --T-> fir: 1 fin: 1 seq: 0
11:02:18.944 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 8 dest: 1024 src: 1
11:02:18.944 --P-> 05 64 08 C4 00 04 01 00 9A 19
11:02:18.944 C0 C1 00 7D 3D
11:02:18.944 [PLG] Verified 10 double-bit binary input point event(s)
11:02:18.944 step: 15
11:02:18.944 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02
11:02:18.944 - g4v0, All Objects
11:02:18.944 - (Only if IIN1.4 was set in step 3's response)
11:02:18.944 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02
11:02:18.944 g4v0, All Objects
11:02:18.944 --T-> fir: 1 fin: 1 seq: 0
11:02:18.944 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
11:02:18.944 --P-> 05 64 0B C4 00 04 01 00 CA 8A
11:02:18.944 C0 C2 01 04 00 06 0F 46
11:02:18.945 step: 16
11:02:18.945 - Read a single fragment response w/ sequence(0x02)
11:02:18.945 - Verify that the response is empty
11:02:18.945 - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported)
11:02:18.945 - (Only if IIN1.4 was set in step 3's response)
11:02:18.945 <-P-- 05 64 0A 44 01 00 00 04 67 88
11:02:18.945 C2 C2 81 90 00 3E A2
11:02:18.945 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024
11:02:18.945 <-T-- fir: 1 fin: 1 seq: 2
11:02:18.945 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 IIN(DeviceRestart, NeedTime)
11:02:18.945 step: 17
11:02:18.945 - Write the current time + 5 ms w/ sequence(0x03)
11:02:18.945 - (Only if IIN1.4 was set in step 3's response, and the master can write the time)
11:02:18.945 --A-> Write(0x02) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03
11:02:18.945 g50v1, 1-Byte Count, count: 1
11:02:18.945 time: 1793185338950
11:02:18.945 --T-> fir: 1 fin: 1 seq: 0
11:02:18.945 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 18 dest: 1024 src: 1
11:02:18.945 --P-> 05 64 12 C4 00 04 01 00 30 DD
11:02:18.945 C0 C3 02 32 01 07 01 46 D6 2C 82 A1 01 71 74
11:02:18.945 step: 18
11:02:18.945 - Read a single fragment response w/ sequence(0x03)
11:02:18.945 - Verify that the response is empty
11:02:18.945 - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported)
11:02:18.945 - Verify that the IIN field does not contain bits IIN(NeedTime)
11:02:18.945 - (Only if IIN1.4 was set in step 3's response, and the master can write the time)
11:02:18.945 <-P-- 05 64 0A 44 01 00 00 04 67 88
11:02:18.945 C3 C3 81 80 00 F8 9C
11:02:18.945 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024
11:02:18.945 <-T-- fir: 1 fin: 1 seq: 3
11:02:18.945 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03 IIN(DeviceRestart)
11:02:18.945 step: 19
11:02:18.945 - Change double-bit binary inputs several times, one or more of them, to create events
11:02:18.945 [PLG] Updated DBBI 0: value=DETERMINED_OFF, flags=41, timestamp=1793185338950 (SYNCHRONIZED_TIME)
11:02:18.945 [PLG] Updated DBBI 1: value=DETERMINED_OFF, flags=41, timestamp=1793185338950 (SYNCHRONIZED_TIME)
11:02:18.945 [PLG] Updated DBBI 2: value=DETERMINED_OFF, flags=41, timestamp=1793185338950 (SYNCHRONIZED_TIME)
11:02:18.945 [PLG] Updated DBBI 3: value=DETERMINED_OFF, flags=41, timestamp=1793185338950 (SYNCHRONIZED_TIME)
11:02:18.945 [PLG] Updated DBBI 4: value=DETERMINED_OFF, flags=41, timestamp=1793185338950 (SYNCHRONIZED_TIME)
11:02:18.945 [PLG] Updated DBBI 5: value=DETERMINED_OFF, flags=41, timestamp=1793185338950 (SYNCHRONIZED_TIME)
11:02:18.945 [PLG] Updated DBBI 6: value=DETERMINED_OFF, flags=41, timestamp=1793185338950 (SYNCHRONIZED_TIME)
11:02:18.945 [PLG] Updated DBBI 7: value=DETERMINED_OFF, flags=41, timestamp=1793185338950 (SYNCHRONIZED_TIME)
11:02:18.945 [PLG] Updated DBBI 8: value=DETERMINED_OFF, flags=41, timestamp=1793185338950 (SYNCHRONIZED_TIME)
11:02:18.945 [PLG] Updated DBBI 9: value=DETERMINED_OFF, flags=41, timestamp=1793185338950 (SYNCHRONIZED_TIME)
11:02:18.945 The plugin reports the DUT's clock synchronized
11:02:18.945 step: 20
11:02:18.945 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x04
11:02:18.945 - g4v3, All Objects
11:02:18.945 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x04
11:02:18.945 g4v3, All Objects
11:02:18.945 --T-> fir: 1 fin: 1 seq: 0
11:02:18.945 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
11:02:18.945 --P-> 05 64 0B C4 00 04 01 00 CA 8A
11:02:18.945 C0 C4 01 04 03 06 B0 3C
11:02:18.946 steps: 21 to 28
11:02:18.946 - Read a single fragment response w/ sequence(0x04)
11:02:18.946 - Verify that the response holds every Double-bit Binary event generated
11:02:18.946 - If the events carry timestamps, verify that the gaps between them match the gaps between when the events were generated, to the Device Profile's resolution
11:02:18.946 - Verify that an application layer confirmation is requested.
11:02:18.946 - Verify that the events are reported as 3.1r1's rules for event reporting require, for a read of g4v3, by the state of the DUT's clock when it recorded them, where the procedure or the plugin knows it
11:02:18.946 - Verify that the flags behave as the note on flags in Section 2 requires (Note 5 in 2.7, Note 6 in 3.1r1).
11:02:18.946 - Confirm each response that asks for a confirmation
11:02:18.946 <-P-- 05 64 4B 44 01 00 00 04 FD 93
11:02:18.946 C4 E4 81 80 00 33 01 07 01 46 D6 2C 82 A1 01 04 4E 0E
11:02:18.946 03 28 0A 00 00 00 41 00 00 01 00 41 00 00 02 00 50 BE
11:02:18.946 41 00 00 03 00 41 00 00 04 00 41 00 00 05 00 41 D8 91
11:02:18.946 00 00 06 00 41 00 00 07 00 41 00 00 08 00 41 00 21 C6
11:02:18.946 00 09 00 41 00 00 67 1C
11:02:18.946 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 75 dest: 1 src: 1024
11:02:18.946 <-T-- fir: 1 fin: 1 seq: 4
11:02:18.946 <-A-- Response(0x81) fir: 1 fin: 1 con: 1 uns: 0 seq: 0x04 IIN(DeviceRestart)
11:02:18.946 g51v1, 1-Byte Count, count: 1
11:02:18.946 time: 1793185338950
11:02:18.946 g4v3, 2-Byte Count and Index, count: 10
11:02:18.946 [0] - flags: 0x41 cto: 0
11:02:18.946 [1] - flags: 0x41 cto: 0
11:02:18.946 [2] - flags: 0x41 cto: 0
11:02:18.946 [3] - flags: 0x41 cto: 0
11:02:18.946 [4] - flags: 0x41 cto: 0
11:02:18.946 [5] - flags: 0x41 cto: 0
11:02:18.946 [6] - flags: 0x41 cto: 0
11:02:18.946 [7] - flags: 0x41 cto: 0
11:02:18.946 [8] - flags: 0x41 cto: 0
11:02:18.946 [9] - flags: 0x41 cto: 0
11:02:18.946 --A-> Confirm(0x00) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x04
11:02:18.946 --T-> fir: 1 fin: 1 seq: 0
11:02:18.946 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 8 dest: 1024 src: 1
11:02:18.946 --P-> 05 64 08 C4 00 04 01 00 9A 19
11:02:18.946 C0 C4 00 F9 A1
11:02:18.946 [PLG] Verified 10 double-bit binary input point event(s)
11:02:18.946 step: 29
11:02:18.946 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x05
11:02:18.946 - g4v0, All Objects
11:02:18.946 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x05
11:02:18.946 g4v0, All Objects
11:02:18.946 --T-> fir: 1 fin: 1 seq: 0
11:02:18.946 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
11:02:18.946 --P-> 05 64 0B C4 00 04 01 00 CA 8A
11:02:18.946 C0 C5 01 04 00 06 1D AF
11:02:18.946 step: 30
11:02:18.946 - Read a single fragment response w/ sequence(0x05)
11:02:18.946 - Verify that the response is empty
11:02:18.946 - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported)
11:02:18.946 <-P-- 05 64 0A 44 01 00 00 04 67 88
11:02:18.946 C5 C5 81 80 00 6E 42
11:02:18.946 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024
11:02:18.946 <-T-- fir: 1 fin: 1 seq: 5
11:02:18.946 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x05 IIN(DeviceRestart)
11:02:18.947 step: 31
11:02:18.947 - If the DUT doesn't report events with relative time, or never sets IIN1.4, skip the rest of this test
11:02:18.947 step: 32
11:02:18.947 - Wait for 5000 milliseconds
11:02:18.947 - (Only if the DUT reports events with relative time and asks for the time)
11:02:23.947 step: 33
11:02:23.947 - Wait for 5000 milliseconds
11:02:23.947 - (Only if the DUT reports events with relative time and asks for the time)
11:02:28.947 step: 34
11:02:28.947 - Change double-bit binary inputs several times, one or more of them, to create events
11:02:28.947 - (Only if the DUT reports events with relative time and asks for the time)
11:02:28.947 [PLG] Updated DBBI 0: value=DETERMINED_ON, flags=81, timestamp=1793185348952 (UNSYNCHRONIZED_TIME)
11:02:28.947 [PLG] Updated DBBI 1: value=DETERMINED_ON, flags=81, timestamp=1793185348952 (UNSYNCHRONIZED_TIME)
11:02:28.947 [PLG] Updated DBBI 2: value=DETERMINED_ON, flags=81, timestamp=1793185348952 (UNSYNCHRONIZED_TIME)
11:02:28.947 [PLG] Updated DBBI 3: value=DETERMINED_ON, flags=81, timestamp=1793185348952 (UNSYNCHRONIZED_TIME)
11:02:28.947 [PLG] Updated DBBI 4: value=DETERMINED_ON, flags=81, timestamp=1793185348952 (UNSYNCHRONIZED_TIME)
11:02:28.947 [PLG] Updated DBBI 5: value=DETERMINED_ON, flags=81, timestamp=1793185348952 (UNSYNCHRONIZED_TIME)
11:02:28.947 [PLG] Updated DBBI 6: value=DETERMINED_ON, flags=81, timestamp=1793185348952 (UNSYNCHRONIZED_TIME)
11:02:28.947 [PLG] Updated DBBI 7: value=DETERMINED_ON, flags=81, timestamp=1793185348952 (UNSYNCHRONIZED_TIME)
11:02:28.947 [PLG] Updated DBBI 8: value=DETERMINED_ON, flags=81, timestamp=1793185348952 (UNSYNCHRONIZED_TIME)
11:02:28.947 [PLG] Updated DBBI 9: value=DETERMINED_ON, flags=81, timestamp=1793185348952 (UNSYNCHRONIZED_TIME)
11:02:28.947 The plugin reports the DUT's clock unsynchronized
11:02:28.947 step: 35
11:02:28.947 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x06
11:02:28.947 - g4v3, All Objects
11:02:28.947 - (Only if the DUT reports events with relative time and asks for the time)
11:02:28.947 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x06
11:02:28.947 g4v3, All Objects
11:02:28.947 --T-> fir: 1 fin: 1 seq: 0
11:02:28.947 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
11:02:28.947 --P-> 05 64 0B C4 00 04 01 00 CA 8A
11:02:28.947 C0 C6 01 04 03 06 BC 7A
11:02:28.948 steps: 36 to 38
11:02:28.948 - Read a single fragment response w/ sequence(0x06)
11:02:28.948 - Verify that the response holds every Double-bit Binary event generated
11:02:28.948 - If the events carry timestamps, verify that the gaps between them match the gaps between when the events were generated, to the Device Profile's resolution
11:02:28.948 - Verify that an application layer confirmation is requested.
11:02:28.948 - Verify that the events are reported as 3.1r1's rules for event reporting require, for a read of g4v3, by the state of the DUT's clock when it recorded them, where the procedure or the plugin knows it
11:02:28.948 - Verify that the flags behave as the note on flags in Section 2 requires (Note 5 in 2.7, Note 6 in 3.1r1).
11:02:28.948 - Confirm each response that asks for a confirmation
11:02:28.948 - (Only if the DUT reports events with relative time and asks for the time)
11:02:28.948 <-P-- 05 64 4B 44 01 00 00 04 FD 93
11:02:28.948 C6 E6 81 90 00 33 02 07 01 58 FD 2C 82 A1 01 04 F0 53
11:02:28.948 03 28 0A 00 00 00 81 00 00 01 00 81 00 00 02 00 AC 42
11:02:28.948 81 00 00 03 00 81 00 00 04 00 81 00 00 05 00 81 9B 00
11:02:28.948 00 00 06 00 81 00 00 07 00 81 00 00 08 00 81 00 A9 FA
11:02:28.948 00 09 00 81 00 00 AF C5
11:02:28.948 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 75 dest: 1 src: 1024
11:02:28.948 <-T-- fir: 1 fin: 1 seq: 6
11:02:28.948 <-A-- Response(0x81) fir: 1 fin: 1 con: 1 uns: 0 seq: 0x06 IIN(DeviceRestart, NeedTime)
11:02:28.948 g51v2, 1-Byte Count, count: 1
11:02:28.948 time: 1793185348952
11:02:28.948 g4v3, 2-Byte Count and Index, count: 10
11:02:28.948 [0] - flags: 0x81 cto: 0
11:02:28.948 [1] - flags: 0x81 cto: 0
11:02:28.948 [2] - flags: 0x81 cto: 0
11:02:28.948 [3] - flags: 0x81 cto: 0
11:02:28.948 [4] - flags: 0x81 cto: 0
11:02:28.948 [5] - flags: 0x81 cto: 0
11:02:28.948 [6] - flags: 0x81 cto: 0
11:02:28.948 [7] - flags: 0x81 cto: 0
11:02:28.948 [8] - flags: 0x81 cto: 0
11:02:28.948 [9] - flags: 0x81 cto: 0
11:02:28.948 --A-> Confirm(0x00) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x06
11:02:28.948 --T-> fir: 1 fin: 1 seq: 0
11:02:28.948 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 8 dest: 1024 src: 1
11:02:28.948 --P-> 05 64 08 C4 00 04 01 00 9A 19
11:02:28.948 C0 C6 00 1C BA
11:02:28.948 [PLG] Verified 10 double-bit binary input point event(s)
11:02:28.949 Passed procedure: 8.22m