8.22p Double-bit Input Change with Relative Time, Long Interval (as 8.14.2p) (revision 3.1r1, subset level 3)

Device under test: Step Function I/O dnp3 outstation

All results
11:02:29.630 Running procedure: 8.22p
11:02:29.631 This procedure is enabled because the following options:
11:02:29.631 - supports.doubleBitInput == true
11:02:29.631 - supports.doubleBitInputChangeEvents == true
11:02:29.631 - supports.doubleBitInputEventReads == true
11:02:29.631 - timesync.doubleBitInputChangeWithRelativeTimeRejected == false
11:02:29.631 - timesync.doubleBitInputChangeWithRelativeTime == true
11:02:29.631 step: 1
11:02:29.631 - For a DUT that reports events with relative time
11:02:29.631 step: 2
11:02:29.631 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
11:02:29.631 - g4v0, All Objects
11:02:29.631 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
11:02:29.631 g4v0, All Objects
11:02:29.631 --T-> fir: 1 fin: 1 seq: 0
11:02:29.631 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
11:02:29.631 --P-> 05 64 0B C4 00 04 01 00 CA 8A
11:02:29.631 C0 C1 01 04 00 06 05 23
11:02:29.631 steps: 3 to 4
11:02:29.631 - Read any number of valid responses beginning w/ sequence(0x01) and incrementing by 1 modulo 16
11:02:29.631 - If the response carries data, verify that it asks for an application layer confirmation.
11:02:29.631 - Confirm each response that asks for a confirmation
11:02:29.632 <-P-- 05 64 0A 44 01 00 00 04 67 88
11:02:29.632 C0 C1 81 90 00 73 EE
11:02:29.632 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024
11:02:29.632 <-T-- fir: 1 fin: 1 seq: 0
11:02:29.632 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 IIN(DeviceRestart, NeedTime)
11:02:29.632 step: 5
11:02:29.632 - Change double-bit binary inputs several times, one or more of them, to create events
11:02:29.632 [PLG] Updated DBBI 0: value=DETERMINED_ON, flags=81, timestamp=1793185349632 (UNSYNCHRONIZED_TIME)
11:02:29.632 [PLG] Updated DBBI 1: value=DETERMINED_ON, flags=81, timestamp=1793185349632 (UNSYNCHRONIZED_TIME)
11:02:29.632 [PLG] Updated DBBI 2: value=DETERMINED_ON, flags=81, timestamp=1793185349632 (UNSYNCHRONIZED_TIME)
11:02:29.632 [PLG] Updated DBBI 3: value=DETERMINED_ON, flags=81, timestamp=1793185349632 (UNSYNCHRONIZED_TIME)
11:02:29.632 [PLG] Updated DBBI 4: value=DETERMINED_ON, flags=81, timestamp=1793185349632 (UNSYNCHRONIZED_TIME)
11:02:29.632 [PLG] Updated DBBI 5: value=DETERMINED_ON, flags=81, timestamp=1793185349632 (UNSYNCHRONIZED_TIME)
11:02:29.632 [PLG] Updated DBBI 6: value=DETERMINED_ON, flags=81, timestamp=1793185349632 (UNSYNCHRONIZED_TIME)
11:02:29.632 [PLG] Updated DBBI 7: value=DETERMINED_ON, flags=81, timestamp=1793185349632 (UNSYNCHRONIZED_TIME)
11:02:29.632 [PLG] Updated DBBI 8: value=DETERMINED_ON, flags=81, timestamp=1793185349632 (UNSYNCHRONIZED_TIME)
11:02:29.632 [PLG] Updated DBBI 9: value=DETERMINED_ON, flags=81, timestamp=1793185349632 (UNSYNCHRONIZED_TIME)
11:02:29.632 The plugin reports the DUT's clock unsynchronized
11:02:29.632 step: 6
11:02:29.632 - Wait for 70535 milliseconds
11:03:40.167 step: 7
11:03:40.167 - Change double-bit binary inputs several times, one or more of them, to create events
11:03:40.168 [PLG] Updated DBBI 0: value=DETERMINED_OFF, flags=41, timestamp=1793185420168 (UNSYNCHRONIZED_TIME)
11:03:40.168 [PLG] Updated DBBI 1: value=DETERMINED_OFF, flags=41, timestamp=1793185420168 (UNSYNCHRONIZED_TIME)
11:03:40.168 [PLG] Updated DBBI 2: value=DETERMINED_OFF, flags=41, timestamp=1793185420168 (UNSYNCHRONIZED_TIME)
11:03:40.168 [PLG] Updated DBBI 3: value=DETERMINED_OFF, flags=41, timestamp=1793185420168 (UNSYNCHRONIZED_TIME)
11:03:40.168 [PLG] Updated DBBI 4: value=DETERMINED_OFF, flags=41, timestamp=1793185420168 (UNSYNCHRONIZED_TIME)
11:03:40.168 [PLG] Updated DBBI 5: value=DETERMINED_OFF, flags=41, timestamp=1793185420168 (UNSYNCHRONIZED_TIME)
11:03:40.168 [PLG] Updated DBBI 6: value=DETERMINED_OFF, flags=41, timestamp=1793185420168 (UNSYNCHRONIZED_TIME)
11:03:40.168 [PLG] Updated DBBI 7: value=DETERMINED_OFF, flags=41, timestamp=1793185420168 (UNSYNCHRONIZED_TIME)
11:03:40.168 [PLG] Updated DBBI 8: value=DETERMINED_OFF, flags=41, timestamp=1793185420168 (UNSYNCHRONIZED_TIME)
11:03:40.168 [PLG] Updated DBBI 9: value=DETERMINED_OFF, flags=41, timestamp=1793185420168 (UNSYNCHRONIZED_TIME)
11:03:40.168 The plugin reports the DUT's clock unsynchronized
11:03:40.168 step: 8
11:03:40.168 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02
11:03:40.168 - g4v3, All Objects
11:03:40.168 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02
11:03:40.168 g4v3, All Objects
11:03:40.168 --T-> fir: 1 fin: 1 seq: 0
11:03:40.168 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
11:03:40.168 --P-> 05 64 0B C4 00 04 01 00 CA 8A
11:03:40.168 C0 C2 01 04 03 06 A4 F6
11:03:40.168 steps: 9 to 16
11:03:40.168 - Read a single fragment response w/ sequence(0x02)
11:03:40.168 - Verify that the response carries every Double-bit Binary event generated and not yet confirmed, in the order they occurred
11:03:40.168 - If the events carry timestamps, verify that the gaps between them match the gaps between when the events were generated, to the Device Profile's resolution
11:03:40.168 - Verify that an application layer confirmation is requested.
11:03:40.168 - Verify that the response contains events of the variations List(g4v3), and besides them only CTOs (g51v1 or g51v2, qualifier 0x07)
11:03:40.168 - Verify that the event objects are prefixed with 1-octet (qualifier 0x17) or 2-octet (qualifier 0x28) indexes
11:03:40.168 - Verify that each relative-time event is preceded by a CTO object (Table 8-4)
11:03:40.168 - Verify that a CTO (g51v1 or g51v2) precedes each group of events more than 0xFFFF ms apart: at least two
11:03:40.168 - Verify that the flags behave as the note on flags in Section 2 requires (Note 5 in 2.7, Note 6 in 3.1r1).
11:03:40.168 - Confirm each response that asks for a confirmation
11:03:40.169 <-P-- 05 64 8C 44 01 00 00 04 3D F2
11:03:40.169 C1 E2 81 90 00 33 02 07 01 00 00 2D 82 A1 01 04 67 06
11:03:40.169 03 28 0A 00 00 00 81 00 00 01 00 81 00 00 02 00 AC 42
11:03:40.169 81 00 00 03 00 81 00 00 04 00 81 00 00 05 00 81 9B 00
11:03:40.169 00 00 06 00 81 00 00 07 00 81 00 00 08 00 81 00 A9 FA
11:03:40.169 00 09 00 81 00 00 33 02 07 01 88 13 2E 82 A1 01 0C 44
11:03:40.169 04 03 28 0A 00 00 00 41 00 00 01 00 41 00 00 02 09 40
11:03:40.169 00 41 00 00 03 00 41 00 00 04 00 41 00 00 05 00 4E FE
11:03:40.169 41 00 00 06 00 41 00 00 07 00 41 00 00 08 00 41 D8 77
11:03:40.169 00 00 09 00 41 00 00 67 1C
11:03:40.169 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 140 dest: 1 src: 1024
11:03:40.169 <-T-- fir: 1 fin: 1 seq: 1
11:03:40.169 <-A-- Response(0x81) fir: 1 fin: 1 con: 1 uns: 0 seq: 0x02 IIN(DeviceRestart, NeedTime)
11:03:40.169 g51v2, 1-Byte Count, count: 1
11:03:40.169 time: 1793185349632
11:03:40.169 g4v3, 2-Byte Count and Index, count: 10
11:03:40.169 [0] - flags: 0x81 cto: 0
11:03:40.169 [1] - flags: 0x81 cto: 0
11:03:40.169 [2] - flags: 0x81 cto: 0
11:03:40.169 [3] - flags: 0x81 cto: 0
11:03:40.169 [4] - flags: 0x81 cto: 0
11:03:40.169 [5] - flags: 0x81 cto: 0
11:03:40.169 [6] - flags: 0x81 cto: 0
11:03:40.169 [7] - flags: 0x81 cto: 0
11:03:40.169 [8] - flags: 0x81 cto: 0
11:03:40.169 [9] - flags: 0x81 cto: 0
11:03:40.169 g51v2, 1-Byte Count, count: 1
11:03:40.169 time: 1793185420168
11:03:40.169 g4v3, 2-Byte Count and Index, count: 10
11:03:40.169 [0] - flags: 0x41 cto: 0
11:03:40.169 [1] - flags: 0x41 cto: 0
11:03:40.169 [2] - flags: 0x41 cto: 0
11:03:40.169 [3] - flags: 0x41 cto: 0
11:03:40.169 [4] - flags: 0x41 cto: 0
11:03:40.169 [5] - flags: 0x41 cto: 0
11:03:40.169 [6] - flags: 0x41 cto: 0
11:03:40.169 [7] - flags: 0x41 cto: 0
11:03:40.169 [8] - flags: 0x41 cto: 0
11:03:40.169 [9] - flags: 0x41 cto: 0
11:03:40.169 --A-> Confirm(0x00) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02
11:03:40.169 --T-> fir: 1 fin: 1 seq: 0
11:03:40.169 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 8 dest: 1024 src: 1
11:03:40.169 --P-> 05 64 08 C4 00 04 01 00 9A 19
11:03:40.169 C0 C2 00 D6 8D
11:03:40.170 [PLG] Verified 20 double-bit binary input point event(s)
11:03:40.170 step: 17
11:03:40.170 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03
11:03:40.170 - g4v3, All Objects
11:03:40.170 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03
11:03:40.170 g4v3, All Objects
11:03:40.170 --T-> fir: 1 fin: 1 seq: 0
11:03:40.170 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
11:03:40.170 --P-> 05 64 0B C4 00 04 01 00 CA 8A
11:03:40.170 C0 C3 01 04 03 06 A2 D5
11:03:40.170 step: 18
11:03:40.170 - Read a single fragment response w/ sequence(0x03)
11:03:40.170 - Verify that the response is empty
11:03:40.170 - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported)
11:03:40.170 <-P-- 05 64 0A 44 01 00 00 04 67 88
11:03:40.170 C2 C3 81 90 00 D6 60
11:03:40.170 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024
11:03:40.170 <-T-- fir: 1 fin: 1 seq: 2
11:03:40.170 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03 IIN(DeviceRestart, NeedTime)
11:03:40.170 Passed procedure: 8.22p