| 11:03:41.069 | Running procedure: 8.23.2.2.1 | |
| 11:03:41.070 | This procedure is enabled because the following options: | |
| 11:03:41.070 | - supports.binaryOutput.status == false or (supports.binaryOutput.status == true and supports.disable.binaryOutput == true) | |
| 11:03:41.070 | step: 1 | |
| 11:03:41.070 | - Uninstall or disable every binary output point on the DUT | |
| 11:03:41.070 | [PLG] | All binary output status points were uninstalled |
| 11:03:41.070 | [PLG] | Cycling power |
| 11:03:41.071 | step: 2 | |
| 11:03:41.071 | - Read g10v0 with a 8-bit (qualifier 0x00) start/stop range, 0 to 0, w/ sequence(0x01) | |
| 11:03:41.071 | - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 | |
| 11:03:41.071 | - g10v0, 1-Byte Start/Stop, start: 0 stop: 0 | |
| 11:03:41.071 | --A-> | Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 |
| 11:03:41.071 | g10v0, 1-Byte Start/Stop, start: 0 stop: 0 | |
| 11:03:41.071 | --T-> | fir: 1 fin: 1 seq: 0 |
| 11:03:41.071 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 13 dest: 1024 src: 1 |
| 11:03:41.071 | --P-> | 05 64 0D C4 00 04 01 00 13 E1 |
| 11:03:41.071 | C0 C1 01 0A 00 00 00 00 3E BC | |
| 11:03:41.071 | step: 3 | |
| 11:03:41.071 | - Read a single fragment response w/ sequence(0x01) | |
| 11:03:41.071 | - Verify that the response is empty | |
| 11:03:41.071 | - Verify that the IIN field contains at least one of IIN(ParamError, ObjectUnknown) | |
| 11:03:41.071 | - Verify that the IIN field does not contain bits IIN(FuncNotSupported) | |
| 11:03:41.071 | <-P-- | 05 64 0A 44 01 00 00 04 67 88 |
| 11:03:41.071 | C0 C1 81 90 02 CF 82 | |
| 11:03:41.071 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024 |
| 11:03:41.071 | <-T-- | fir: 1 fin: 1 seq: 0 |
| 11:03:41.071 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 IIN(DeviceRestart, NeedTime, ObjectUnknown) |
| 11:03:41.071 | step: 4 | |
| 11:03:41.071 | - Read g10v0 with a 16-bit (qualifier 0x01) start/stop range, 0 to 0, w/ sequence(0x02) | |
| 11:03:41.071 | - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 | |
| 11:03:41.071 | - g10v0, 2-Byte Start/Stop, start: 0 stop: 0 | |
| 11:03:41.071 | --A-> | Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 |
| 11:03:41.071 | g10v0, 2-Byte Start/Stop, start: 0 stop: 0 | |
| 11:03:41.071 | --T-> | fir: 1 fin: 1 seq: 0 |
| 11:03:41.071 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 15 dest: 1024 src: 1 |
| 11:03:41.072 | --P-> | 05 64 0F C4 00 04 01 00 A4 C7 |
| 11:03:41.072 | C0 C2 01 0A 00 01 00 00 00 00 35 E0 | |
| 11:03:41.072 | step: 5 | |
| 11:03:41.072 | - Read a single fragment response w/ sequence(0x02) | |
| 11:03:41.072 | - Verify that the response is empty | |
| 11:03:41.072 | - Verify that the IIN field contains at least one of IIN(ParamError, ObjectUnknown) | |
| 11:03:41.072 | - Verify that the IIN field does not contain bits IIN(FuncNotSupported) | |
| 11:03:41.072 | <-P-- | 05 64 0A 44 01 00 00 04 67 88 |
| 11:03:41.072 | C1 C2 81 90 02 88 AB | |
| 11:03:41.072 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024 |
| 11:03:41.072 | <-T-- | fir: 1 fin: 1 seq: 1 |
| 11:03:41.072 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 IIN(DeviceRestart, NeedTime, ObjectUnknown) |
| 11:03:41.072 | step: 6 | |
| 11:03:41.072 | - The binary output status points are back, if they were uninstalled | |
| 11:03:41.072 | - Reinstall or re-enable the points that were uninstalled or disabled, so later procedures can use them | |
| 11:03:41.072 | [PLG] | All points were reinstalled |
| 11:03:41.072 | [PLG] | Cycling power |
| 11:03:41.072 | Passed procedure: 8.23.2.2.1 | |
| 11:03:41.072 | restore | |
| 11:03:41.072 | - Reinstall or re-enable the points that were uninstalled or disabled, so later procedures can use them |