11:03:42.199		Running procedure: 8.23.2.3.3
11:03:42.200		This procedure is enabled because the following options:
11:03:42.200		- supports.counter == true
11:03:42.200		- supports.counterReads == true
11:03:42.200		step: 1
11:03:42.200		- Before step 1, read all of the DUT's counters to find their indices
11:03:42.200		- Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
11:03:42.200		- g20v0, All Objects
11:03:42.200		- Read any number of valid responses beginning w/ sequence(0x00) and incrementing by 1 modulo 16
11:03:42.200		- Note the indices of the counters reported
11:03:42.200		- Confirm each response that asks for a confirmation
11:03:42.200		- Read g20v0 with a start/stop range from the highest index of the counters to one past it, 8-bit (qualifier 0x00) where it fits, else 16-bit (0x01)
11:03:42.200	--A->	Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
11:03:42.200		g20v0, All Objects
11:03:42.200	--T->	fir: 1 fin: 1 seq: 0
11:03:42.200	--L->	master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
11:03:42.200	--P->	05 64 0B C4 00 04 01 00 CA 8A
11:03:42.200		C0 C0 01 14 00 06 FA D6
11:03:42.200	<-P--	05 64 2F 44 01 00 00 04 6C 81
11:03:42.200		C0 C0 81 90 00 14 02 01 00 00 09 00 01 00 00 01 AB D3
11:03:42.200		00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 DB 49
11:03:42.200		00 01 00 00 01 00 00 01 00 00 61 8D
11:03:42.200	<-L--	master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 47 dest: 1 src: 1024
11:03:42.200	<-T--	fir: 1 fin: 1 seq: 0
11:03:42.201	<-A--	Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 IIN(DeviceRestart, NeedTime)
11:03:42.201		g20v2, 2-Byte Start/Stop, start: 0 stop: 9
11:03:42.201		[0] - flags: 0x01 count: 0
11:03:42.201		[1] - flags: 0x01 count: 0
11:03:42.201		[2] - flags: 0x01 count: 0
11:03:42.201		[3] - flags: 0x01 count: 0
11:03:42.201		[4] - flags: 0x01 count: 0
11:03:42.201		[5] - flags: 0x01 count: 0
11:03:42.201		[6] - flags: 0x01 count: 0
11:03:42.201		[7] - flags: 0x01 count: 0
11:03:42.201		[8] - flags: 0x01 count: 0
11:03:42.201		[9] - flags: 0x01 count: 0
11:03:42.201	--A->	Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
11:03:42.201		g20v0, 1-Byte Start/Stop, start: 9 stop: 10
11:03:42.201	--T->	fir: 1 fin: 1 seq: 0
11:03:42.201	--L->	master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 13 dest: 1024 src: 1
11:03:42.201	--P->	05 64 0D C4 00 04 01 00 13 E1
11:03:42.201		C0 C1 01 14 00 00 09 0A 1E DE
11:03:42.201		step: 2
11:03:42.201		- Read a single fragment response w/ sequence(0x01)
11:03:42.201		- Verify that the IIN field contains IIN(ParamError)
11:03:42.201		- Verify that the response reports nothing but the counters at the highest index, if anything
11:03:42.204	<-P--	05 64 14 44 01 00 00 04 A3 01
11:03:42.204		C1 C1 81 90 04 14 02 01 09 00 09 00 01 00 00 6A 05
11:03:42.204	<-L--	master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 20 dest: 1 src: 1024
11:03:42.204	<-T--	fir: 1 fin: 1 seq: 1
11:03:42.204	<-A--	Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 IIN(DeviceRestart, NeedTime, ParamError)
11:03:42.204		g20v2, 2-Byte Start/Stop, start: 9 stop: 9
11:03:42.204		[9] - flags: 0x01 count: 0
11:03:42.204		Passed procedure: 8.23.2.3.3