11:03:44.235		Running procedure: 8.23.2.6.3
11:03:44.235		This procedure is enabled because the following options:
11:03:44.235		- supports.analogOutput.status == true
11:03:44.235		- supports.rangeReads == true
11:03:44.236		step: 1
11:03:44.236		- Before step 1, read all of the DUT's analog output status points to find their indices
11:03:44.236		- Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
11:03:44.236		- g40v0, All Objects
11:03:44.236		- Read any number of valid responses beginning w/ sequence(0x00) and incrementing by 1 modulo 16
11:03:44.236		- Note the indices of the analog output status points reported
11:03:44.236		- Confirm each response that asks for a confirmation
11:03:44.236		- Read g40v0 with a start/stop range from the highest index of the analog output status points to one past it, 8-bit (qualifier 0x00) where it fits, else 16-bit (0x01)
11:03:44.236	--A->	Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
11:03:44.236		g40v0, All Objects
11:03:44.236	--T->	fir: 1 fin: 1 seq: 0
11:03:44.236	--L->	master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
11:03:44.236	--P->	05 64 0B C4 00 04 01 00 CA 8A
11:03:44.236		C0 C0 01 28 00 06 A8 4B
11:03:44.236	<-P--	05 64 4D 44 01 00 00 04 24 F8
11:03:44.236		C0 C0 81 90 00 28 02 01 00 00 13 00 01 00 00 01 E2 97
11:03:44.236		00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 DB 49
11:03:44.236		00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 9E 0F
11:03:44.236		01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 FE 85
11:03:44.236		00 00 01 00 00 01 00 00 A0 53
11:03:44.236	<-L--	master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 77 dest: 1 src: 1024
11:03:44.236	<-T--	fir: 1 fin: 1 seq: 0
11:03:44.237	<-A--	Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 IIN(DeviceRestart, NeedTime)
11:03:44.237		g40v2, 2-Byte Start/Stop, start: 0 stop: 19
11:03:44.237		[0] - flags: 0x01 value: 0
11:03:44.237		[1] - flags: 0x01 value: 0
11:03:44.237		[2] - flags: 0x01 value: 0
11:03:44.237		[3] - flags: 0x01 value: 0
11:03:44.237		[4] - flags: 0x01 value: 0
11:03:44.237		[5] - flags: 0x01 value: 0
11:03:44.237		[6] - flags: 0x01 value: 0
11:03:44.237		[7] - flags: 0x01 value: 0
11:03:44.237		[8] - flags: 0x01 value: 0
11:03:44.237		[9] - flags: 0x01 value: 0
11:03:44.237		[10] - flags: 0x01 value: 0
11:03:44.237		[11] - flags: 0x01 value: 0
11:03:44.237		[12] - flags: 0x01 value: 0
11:03:44.237		[13] - flags: 0x01 value: 0
11:03:44.237		[14] - flags: 0x01 value: 0
11:03:44.237		[15] - flags: 0x01 value: 0
11:03:44.237		[16] - flags: 0x01 value: 0
11:03:44.237		[17] - flags: 0x01 value: 0
11:03:44.237		[18] - flags: 0x01 value: 0
11:03:44.237		[19] - flags: 0x01 value: 0
11:03:44.237	--A->	Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
11:03:44.237		g40v0, 1-Byte Start/Stop, start: 19 stop: 20
11:03:44.237	--T->	fir: 1 fin: 1 seq: 0
11:03:44.237	--L->	master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 13 dest: 1024 src: 1
11:03:44.237	--P->	05 64 0D C4 00 04 01 00 13 E1
11:03:44.237		C0 C1 01 28 00 00 13 14 FF E6
11:03:44.237		step: 2
11:03:44.237		- Read a single fragment response w/ sequence(0x01)
11:03:44.237		- Verify that the IIN field contains IIN(ParamError)
11:03:44.237		- Verify that the response reports nothing but the analog output status points at the highest index, if anything
11:03:44.237	<-P--	05 64 14 44 01 00 00 04 A3 01
11:03:44.237		C1 C1 81 90 04 28 02 01 13 00 13 00 01 00 00 D3 0E
11:03:44.237	<-L--	master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 20 dest: 1 src: 1024
11:03:44.237	<-T--	fir: 1 fin: 1 seq: 1
11:03:44.237	<-A--	Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 IIN(DeviceRestart, NeedTime, ParamError)
11:03:44.237		g40v2, 2-Byte Start/Stop, start: 19 stop: 19
11:03:44.237		[19] - flags: 0x01 value: 0
11:03:44.237		Passed procedure: 8.23.2.6.3