| 10:56:47.538 | Running procedure: 8.4.1.2.13 | |
| 10:56:47.541 | This procedure is enabled because the following options: | |
| 10:56:47.541 | - supports.analogOutput.commands == true | |
| 10:56:47.542 | step: 1 | |
| 10:56:47.542 | - Use the 32-bit analog output 10 | |
| 10:56:47.542 | step: 2 | |
| 10:56:47.542 | - Select(0x03) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 | |
| 10:56:47.542 | - g41v1, 2-Byte Count and Index, count: 1 | |
| 10:56:47.542 | - [10] - value: 70000 status: 0 (SUCCESS) | |
| 10:56:47.542 | --A-> | Select(0x03) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 |
| 10:56:47.542 | g41v1, 2-Byte Count and Index, count: 1 | |
| 10:56:47.542 | [10] - value: 70000 status: 0 (SUCCESS) | |
| 10:56:47.542 | --T-> | fir: 1 fin: 1 seq: 0 |
| 10:56:47.542 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 20 dest: 1024 src: 1 |
| 10:56:47.542 | --P-> | 05 64 14 C4 00 04 01 00 E9 B6 |
| 10:56:47.542 | C0 C0 03 29 01 28 01 00 0A 00 70 11 01 00 00 E2 94 | |
| 10:56:47.542 | steps: 3 to 4 | |
| 10:56:47.542 | - The DUT has a 32-bit analog output installed | |
| 10:56:47.542 | step: 5 | |
| 10:56:47.542 | - Read a single fragment response w/ sequence(0x00) | |
| 10:56:47.542 | - Verify the response contains the exact object header: | |
| 10:56:47.542 | - g41v1, 2-Byte Count and Index, count: 1 | |
| 10:56:47.542 | - [10] - value: 70000 status: 0 (SUCCESS) | |
| 10:56:47.543 | - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported) | |
| 10:56:47.544 | <-P-- | 05 64 16 44 01 00 00 04 14 27 |
| 10:56:47.544 | C0 C0 81 90 00 29 01 28 01 00 0A 00 70 11 01 00 A6 61 | |
| 10:56:47.544 | 00 FF FF | |
| 10:56:47.544 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 22 dest: 1 src: 1024 |
| 10:56:47.544 | <-T-- | fir: 1 fin: 1 seq: 0 |
| 10:56:47.544 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 IIN(DeviceRestart, NeedTime) |
| 10:56:47.544 | g41v1, 2-Byte Count and Index, count: 1 | |
| 10:56:47.544 | [10] - value: 70000 status: 0 (SUCCESS) | |
| 10:56:47.544 | step: 6 | |
| 10:56:47.544 | - Operate(0x04) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 | |
| 10:56:47.544 | - g41v1, 2-Byte Count and Index, count: 1 | |
| 10:56:47.544 | - [10] - value: 70000 status: 0 (SUCCESS) | |
| 10:56:47.544 | --A-> | Operate(0x04) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 |
| 10:56:47.544 | g41v1, 2-Byte Count and Index, count: 1 | |
| 10:56:47.544 | [10] - value: 70000 status: 0 (SUCCESS) | |
| 10:56:47.544 | --T-> | fir: 1 fin: 1 seq: 0 |
| 10:56:47.544 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 20 dest: 1024 src: 1 |
| 10:56:47.545 | --P-> | 05 64 14 C4 00 04 01 00 E9 B6 |
| 10:56:47.545 | C0 C1 04 29 01 28 01 00 0A 00 70 11 01 00 00 CA 7A | |
| 10:56:47.545 | step: 7 | |
| 10:56:47.545 | - Read a single fragment response w/ sequence(0x01) | |
| 10:56:47.545 | - Verify the response contains the exact object header: | |
| 10:56:47.545 | - g41v1, 2-Byte Count and Index, count: 1 | |
| 10:56:47.545 | - [10] - value: 70000 status: 0 (SUCCESS) | |
| 10:56:47.545 | - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported) | |
| 10:56:47.546 | <-P-- | 05 64 16 44 01 00 00 04 14 27 |
| 10:56:47.546 | C1 C1 81 92 00 29 01 28 01 00 0A 00 70 11 01 00 44 FC | |
| 10:56:47.546 | 00 FF FF | |
| 10:56:47.546 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 22 dest: 1 src: 1024 |
| 10:56:47.546 | <-T-- | fir: 1 fin: 1 seq: 1 |
| 10:56:47.546 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 IIN(DeviceRestart, NeedTime, Class1Events) |
| 10:56:47.546 | g41v1, 2-Byte Count and Index, count: 1 | |
| 10:56:47.546 | [10] - value: 70000 status: 0 (SUCCESS) | |
| 10:56:47.546 | step: 8 | |
| 10:56:47.546 | - Check that analog control point 10 operate | |
| 10:56:47.546 | [PLG] | Analog output 10 did operate |
| 10:56:47.546 | Passed procedure: 8.4.1.2.13 |