10:56:55.899		Running procedure: 8.4.3.2.3
10:56:55.900		This procedure is enabled because the following options:
10:56:55.900		- supports.analogOutput.commands == true
10:56:55.900		- supports.disable.analogOutput == true
10:56:55.900		step: 1
10:56:55.900		- The DUT's analog outputs can be uninstalled or disabled through its configuration
10:56:55.900		step: 2
10:56:55.900		- Uninstall or disable every analog output point on the DUT
10:56:55.900	[PLG]	All analog output status points were uninstalled
10:56:55.900	[PLG]	Cycling power
10:56:55.901		step: 3
10:56:55.901		- Direct Operate No Ack(0x06) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
10:56:55.901		- g41v2, 2-Byte Count and Index, count: 1
10:56:55.901		- [0] - value: 10 status: 0 (SUCCESS)
10:56:55.901	--A->	Direct Operate No Ack(0x06) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
10:56:55.901		g41v2, 2-Byte Count and Index, count: 1
10:56:55.901		[0] - value: 10 status: 0 (SUCCESS)
10:56:55.901	--T->	fir: 1 fin: 1 seq: 0
10:56:55.901	--L->	master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 18 dest: 1024 src: 1
10:56:55.901	--P->	05 64 12 C4 00 04 01 00 30 DD
10:56:55.901		C0 C0 06 29 02 28 01 00 00 00 0A 00 00 F6 8F
10:56:55.901		step: 4
10:56:55.901		- Verify that no link layer frames are received within 2000 ms
10:56:57.903		frame receive timeout
10:56:57.903		step: 5
10:56:57.903		- Check that no analog control point operated
10:56:58.905	[PLG]	Analog output did NOT operate
10:56:58.905		Passed procedure: 8.4.3.2.3
10:56:58.905		restore
10:56:58.905		- Reinstall or re-enable the points that were uninstalled or disabled, so later procedures can use them
10:56:58.905	[PLG]	All points were reinstalled
10:56:58.905	[PLG]	Cycling power