| 10:57:21.799 | Running procedure: 8.6.4a | |
| 10:57:21.803 | This procedure is enabled because the following options: | |
| 10:57:21.803 | - supports.globalRemoteSupervisoryControl == true | |
| 10:57:21.803 | - supports.binaryOutput.status == true | |
| 10:57:21.803 | - supports.binaryOutput.commands == true | |
| 10:57:21.803 | step: 1.1 | |
| 10:57:21.803 | - Set the DUT's remote supervisory control to 'Enabled' or 'Remote', globally and for every point | |
| 10:57:21.805 | [PLG] | Every binary output is under remote control |
| 10:57:21.805 | step: 1.2 | |
| 10:57:21.805 | - Binary output 0, the one the controls go to, must be online and have no exception flags | |
| 10:57:21.805 | step: 1.3 | |
| 10:57:21.805 | - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 | |
| 10:57:21.805 | - g10v0, All Objects | |
| 10:57:21.805 | --A-> | Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 |
| 10:57:21.805 | g10v0, All Objects | |
| 10:57:21.805 | --T-> | fir: 1 fin: 1 seq: 0 |
| 10:57:21.806 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1 |
| 10:57:21.806 | --P-> | 05 64 0B C4 00 04 01 00 CA 8A |
| 10:57:21.806 | C0 C0 01 0A 00 06 53 98 | |
| 10:57:21.806 | steps: 1.4 to 1.5 | |
| 10:57:21.806 | - Read any number of valid responses beginning w/ sequence(0x00) and incrementing by 1 modulo 16 | |
| 10:57:21.806 | - Verify that the response contains objects | |
| 10:57:21.806 | - Verify that the device responds with only variations: Set(g10v1, g10v2) | |
| 10:57:21.806 | - Verify that the objects are in start/stop ranges with 1-octet (qualifier 0x00) or 2-octet (qualifier 0x01) indexes | |
| 10:57:21.806 | - Verify that the IIN field does not contain bits IIN(LocalControl) | |
| 10:57:21.806 | - Verify that each fragment followed by another, or carrying events, asks for an application layer confirmation. | |
| 10:57:21.806 | - Note each binary output's flags, to compare the later reads with | |
| 10:57:21.806 | - Verify that binary output(s) 0 are online, with no exception flags | |
| 10:57:21.806 | - Confirm each response that asks for a confirmation | |
| 10:57:21.806 | <-P-- | 05 64 25 44 01 00 00 04 07 3D |
| 10:57:21.806 | C0 C0 81 90 00 0A 02 01 00 00 13 00 01 01 01 01 3A 43 | |
| 10:57:21.806 | 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 BB C3 | |
| 10:57:21.806 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 37 dest: 1 src: 1024 |
| 10:57:21.806 | <-T-- | fir: 1 fin: 1 seq: 0 |
| 10:57:21.807 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 IIN(DeviceRestart, NeedTime) |
| 10:57:21.807 | g10v2, 2-Byte Start/Stop, start: 0 stop: 19 | |
| 10:57:21.807 | [0] - flags: 0x01 | |
| 10:57:21.807 | [1] - flags: 0x01 | |
| 10:57:21.807 | [2] - flags: 0x01 | |
| 10:57:21.807 | [3] - flags: 0x01 | |
| 10:57:21.807 | [4] - flags: 0x01 | |
| 10:57:21.807 | [5] - flags: 0x01 | |
| 10:57:21.807 | [6] - flags: 0x01 | |
| 10:57:21.807 | [7] - flags: 0x01 | |
| 10:57:21.807 | [8] - flags: 0x01 | |
| 10:57:21.807 | [9] - flags: 0x01 | |
| 10:57:21.807 | [10] - flags: 0x01 | |
| 10:57:21.807 | [11] - flags: 0x01 | |
| 10:57:21.807 | [12] - flags: 0x01 | |
| 10:57:21.807 | [13] - flags: 0x01 | |
| 10:57:21.807 | [14] - flags: 0x01 | |
| 10:57:21.807 | [15] - flags: 0x01 | |
| 10:57:21.807 | [16] - flags: 0x01 | |
| 10:57:21.807 | [17] - flags: 0x01 | |
| 10:57:21.807 | [18] - flags: 0x01 | |
| 10:57:21.807 | [19] - flags: 0x01 | |
| 10:57:21.809 | step: 1.6 | |
| 10:57:21.809 | - Set the DUT's global remote supervisory switch to 'Disabled' or 'Local' | |
| 10:57:21.810 | [PLG] | Global remote supervisory control was enabled |
| 10:57:21.810 | step: 1.7 | |
| 10:57:21.810 | - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 | |
| 10:57:21.810 | - g10v0, All Objects | |
| 10:57:21.810 | --A-> | Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 |
| 10:57:21.810 | g10v0, All Objects | |
| 10:57:21.810 | --T-> | fir: 1 fin: 1 seq: 0 |
| 10:57:21.810 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1 |
| 10:57:21.810 | --P-> | 05 64 0B C4 00 04 01 00 CA 8A |
| 10:57:21.810 | C0 C1 01 0A 00 06 55 BB | |
| 10:57:21.810 | steps: 1.8 to 1.9 | |
| 10:57:21.810 | - Read any number of valid responses beginning w/ sequence(0x01) and incrementing by 1 modulo 16 | |
| 10:57:21.810 | - Verify that the response contains objects | |
| 10:57:21.810 | - Verify that the device responds with only variations: Set(g10v1, g10v2) | |
| 10:57:21.810 | - Verify that the objects are in start/stop ranges with 1-octet (qualifier 0x00) or 2-octet (qualifier 0x01) indexes | |
| 10:57:21.810 | - Verify that the IIN field contains IIN(LocalControl) | |
| 10:57:21.810 | - Verify that each fragment followed by another, or carrying events, asks for an application layer confirmation. | |
| 10:57:21.810 | - Verify that each binary output cleared ONLINE, that every binary output kept the state and other flags it had in the first read | |
| 10:57:21.810 | - Confirm each response that asks for a confirmation | |
| 10:57:21.810 | <-P-- | 05 64 25 44 01 00 00 04 07 3D |
| 10:57:21.810 | C1 C1 81 B0 00 0A 02 01 00 00 13 00 00 00 00 00 3F E7 | |
| 10:57:21.810 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 FF FF | |
| 10:57:21.810 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 37 dest: 1 src: 1024 |
| 10:57:21.810 | <-T-- | fir: 1 fin: 1 seq: 1 |
| 10:57:21.811 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 IIN(DeviceRestart, LocalControl, NeedTime) |
| 10:57:21.811 | g10v2, 2-Byte Start/Stop, start: 0 stop: 19 | |
| 10:57:21.811 | [0] - flags: 0x00 | |
| 10:57:21.811 | [1] - flags: 0x00 | |
| 10:57:21.811 | [2] - flags: 0x00 | |
| 10:57:21.811 | [3] - flags: 0x00 | |
| 10:57:21.811 | [4] - flags: 0x00 | |
| 10:57:21.811 | [5] - flags: 0x00 | |
| 10:57:21.811 | [6] - flags: 0x00 | |
| 10:57:21.811 | [7] - flags: 0x00 | |
| 10:57:21.811 | [8] - flags: 0x00 | |
| 10:57:21.811 | [9] - flags: 0x00 | |
| 10:57:21.811 | [10] - flags: 0x00 | |
| 10:57:21.811 | [11] - flags: 0x00 | |
| 10:57:21.811 | [12] - flags: 0x00 | |
| 10:57:21.811 | [13] - flags: 0x00 | |
| 10:57:21.811 | [14] - flags: 0x00 | |
| 10:57:21.811 | [15] - flags: 0x00 | |
| 10:57:21.811 | [16] - flags: 0x00 | |
| 10:57:21.811 | [17] - flags: 0x00 | |
| 10:57:21.811 | [18] - flags: 0x00 | |
| 10:57:21.811 | [19] - flags: 0x00 | |
| 10:57:21.812 | step: 1.10 | |
| 10:57:21.812 | - Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 | |
| 10:57:21.812 | - g12v1, 1-Byte Count and Index, count: 1 | |
| 10:57:21.812 | - [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS) | |
| 10:57:21.812 | --A-> | Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 |
| 10:57:21.812 | g12v1, 1-Byte Count and Index, count: 1 | |
| 10:57:21.812 | [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS) | |
| 10:57:21.812 | --T-> | fir: 1 fin: 1 seq: 0 |
| 10:57:21.812 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 24 dest: 1024 src: 1 |
| 10:57:21.812 | --P-> | 05 64 18 C4 00 04 01 00 5B 61 |
| 10:57:21.812 | C0 C2 05 0C 01 17 01 00 03 01 64 00 00 00 C8 00 ED 4B | |
| 10:57:21.812 | 00 00 00 FF FF | |
| 10:57:21.812 | step: 1.11 | |
| 10:57:21.812 | - Read a single fragment response w/ sequence(0x02) | |
| 10:57:21.812 | - Verify the response contains the exact object header: | |
| 10:57:21.812 | - g12v1, 1-Byte Count and Index, count: 1 | |
| 10:57:21.812 | - [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 7 (LOCAL) | |
| 10:57:21.812 | - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported) | |
| 10:57:21.812 | - Verify that the IIN field contains IIN(LocalControl) | |
| 10:57:21.812 | <-P-- | 05 64 1A 44 01 00 00 04 A6 F0 |
| 10:57:21.812 | C2 C2 81 B0 00 0C 01 17 01 00 03 01 64 00 00 00 65 1C | |
| 10:57:21.812 | C8 00 00 00 07 E2 78 | |
| 10:57:21.812 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 26 dest: 1 src: 1024 |
| 10:57:21.812 | <-T-- | fir: 1 fin: 1 seq: 2 |
| 10:57:21.812 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 IIN(DeviceRestart, LocalControl, NeedTime) |
| 10:57:21.812 | g12v1, 1-Byte Count and Index, count: 1 | |
| 10:57:21.812 | [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 7 (LOCAL) | |
| 10:57:21.812 | step: 1.12 | |
| 10:57:21.812 | - Check that no binary control point operated | |
| 10:57:22.813 | [PLG] | Binary output did NOT operate |
| 10:57:22.813 | step: 1.13 | |
| 10:57:22.813 | - Set the DUT's remote supervisory control to 'Enabled' or 'Remote', globally and for every point | |
| 10:57:22.814 | [PLG] | Every binary output is under remote control |
| 10:57:22.814 | step: 1.14 | |
| 10:57:22.814 | - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03 | |
| 10:57:22.814 | - g10v0, All Objects | |
| 10:57:22.814 | --A-> | Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03 |
| 10:57:22.814 | g10v0, All Objects | |
| 10:57:22.814 | --T-> | fir: 1 fin: 1 seq: 0 |
| 10:57:22.814 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1 |
| 10:57:22.814 | --P-> | 05 64 0B C4 00 04 01 00 CA 8A |
| 10:57:22.814 | C0 C3 01 0A 00 06 59 FD | |
| 10:57:22.814 | step: 1.15 | |
| 10:57:22.814 | - Read any number of valid responses beginning w/ sequence(0x03) and incrementing by 1 modulo 16 | |
| 10:57:22.814 | - Verify that the response contains objects | |
| 10:57:22.814 | - Verify that the device responds with only variations: Set(g10v1, g10v2) | |
| 10:57:22.814 | - Verify that the objects are in start/stop ranges with 1-octet (qualifier 0x00) or 2-octet (qualifier 0x01) indexes | |
| 10:57:22.814 | - Verify that the IIN field does not contain bits IIN(LocalControl) | |
| 10:57:22.814 | - Verify that each fragment followed by another, or carrying events, asks for an application layer confirmation. | |
| 10:57:22.814 | - Verify that every binary output has the flags it had in the first read | |
| 10:57:22.814 | - Confirm each response that asks for a confirmation | |
| 10:57:22.815 | <-P-- | 05 64 25 44 01 00 00 04 07 3D |
| 10:57:22.815 | C3 C3 81 90 00 0A 02 01 00 00 13 00 01 01 01 01 86 27 | |
| 10:57:22.815 | 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 BB C3 | |
| 10:57:22.815 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 37 dest: 1 src: 1024 |
| 10:57:22.815 | <-T-- | fir: 1 fin: 1 seq: 3 |
| 10:57:22.815 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03 IIN(DeviceRestart, NeedTime) |
| 10:57:22.815 | g10v2, 2-Byte Start/Stop, start: 0 stop: 19 | |
| 10:57:22.815 | [0] - flags: 0x01 | |
| 10:57:22.815 | [1] - flags: 0x01 | |
| 10:57:22.815 | [2] - flags: 0x01 | |
| 10:57:22.815 | [3] - flags: 0x01 | |
| 10:57:22.815 | [4] - flags: 0x01 | |
| 10:57:22.815 | [5] - flags: 0x01 | |
| 10:57:22.815 | [6] - flags: 0x01 | |
| 10:57:22.815 | [7] - flags: 0x01 | |
| 10:57:22.815 | [8] - flags: 0x01 | |
| 10:57:22.815 | [9] - flags: 0x01 | |
| 10:57:22.815 | [10] - flags: 0x01 | |
| 10:57:22.815 | [11] - flags: 0x01 | |
| 10:57:22.815 | [12] - flags: 0x01 | |
| 10:57:22.815 | [13] - flags: 0x01 | |
| 10:57:22.815 | [14] - flags: 0x01 | |
| 10:57:22.815 | [15] - flags: 0x01 | |
| 10:57:22.815 | [16] - flags: 0x01 | |
| 10:57:22.815 | [17] - flags: 0x01 | |
| 10:57:22.815 | [18] - flags: 0x01 | |
| 10:57:22.815 | [19] - flags: 0x01 | |
| 10:57:22.816 | step: 1.16 | |
| 10:57:22.816 | - Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x04 | |
| 10:57:22.816 | - g12v1, 1-Byte Count and Index, count: 1 | |
| 10:57:22.816 | - [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS) | |
| 10:57:22.816 | --A-> | Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x04 |
| 10:57:22.816 | g12v1, 1-Byte Count and Index, count: 1 | |
| 10:57:22.816 | [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS) | |
| 10:57:22.816 | --T-> | fir: 1 fin: 1 seq: 0 |
| 10:57:22.816 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 24 dest: 1024 src: 1 |
| 10:57:22.816 | --P-> | 05 64 18 C4 00 04 01 00 5B 61 |
| 10:57:22.816 | C0 C4 05 0C 01 17 01 00 03 01 64 00 00 00 C8 00 C4 62 | |
| 10:57:22.816 | 00 00 00 FF FF | |
| 10:57:22.817 | step: 1.17 | |
| 10:57:22.817 | - Read a single fragment response w/ sequence(0x04) | |
| 10:57:22.817 | - Verify the response contains the exact object header: | |
| 10:57:22.817 | - g12v1, 1-Byte Count and Index, count: 1 | |
| 10:57:22.817 | - [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS) | |
| 10:57:22.817 | - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported) | |
| 10:57:22.817 | - Verify that the IIN field does not contain bits IIN(LocalControl) | |
| 10:57:22.817 | <-P-- | 05 64 1A 44 01 00 00 04 A6 F0 |
| 10:57:22.817 | C4 C4 81 90 00 0C 01 17 01 00 03 01 64 00 00 00 CC 14 | |
| 10:57:22.817 | C8 00 00 00 00 78 FB | |
| 10:57:22.817 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 26 dest: 1 src: 1024 |
| 10:57:22.817 | <-T-- | fir: 1 fin: 1 seq: 4 |
| 10:57:22.817 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x04 IIN(DeviceRestart, NeedTime) |
| 10:57:22.817 | g12v1, 1-Byte Count and Index, count: 1 | |
| 10:57:22.817 | [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS) | |
| 10:57:22.817 | step: 1.18 | |
| 10:57:22.817 | - Check that binary control point 0 operate | |
| 10:57:22.817 | [PLG] | Binary output 0 did operate |
| 10:57:22.817 | Passed procedure: 8.6.4a |