10:57:39.178		Running procedure: 8.7.2
10:57:39.179		This procedure is enabled because the following options:
10:57:39.179		- timesync.supportSynchronizingTimeFromMaster == true
10:57:39.179		- timesync.supportLanTimeSync == true
10:57:39.179		step: 1
10:57:39.179		- Cycle power to the DUT
10:57:39.179	[PLG]	Cycling power
10:57:39.180		step: 2
10:57:39.180		- Wait for 5000 milliseconds
10:57:44.180		step: 3
10:57:44.180		- Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
10:57:44.180		- g60v2, All Objects
10:57:44.181	--A->	Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
10:57:44.181		g60v2, All Objects
10:57:44.181	--T->	fir: 1 fin: 1 seq: 0
10:57:44.181	--L->	master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
10:57:44.181	--P->	05 64 0B C4 00 04 01 00 CA 8A
10:57:44.181		C0 C0 01 3C 02 06 54 E0
10:57:44.181		step: 4
10:57:44.181		- Read any number of valid responses beginning w/ sequence(0x00) and incrementing by 1 modulo 16
10:57:44.181		- Verify that the IIN field contains IIN(NeedTime)
10:57:44.181		- Verify that each fragment followed by another, or carrying events, asks for an application layer confirmation.
10:57:44.181		- Confirm each response that asks for a confirmation
10:57:44.181	<-P--	05 64 0A 44 01 00 00 04 67 88
10:57:44.181		C0 C0 81 90 00 9B 2C
10:57:44.181	<-L--	master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024
10:57:44.181	<-T--	fir: 1 fin: 1 seq: 0
10:57:44.181	<-A--	Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 IIN(DeviceRestart, NeedTime)
10:57:44.181		steps: 5 to 6
10:57:44.181		- Broadcast a Record Current Time request (function code 24) to 0xFFFF, and note when it's been sent
10:57:44.181	--A->	Record Current Time(0x18) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
10:57:44.182	--T->	fir: 1 fin: 1 seq: 0
10:57:44.182	--L->	master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 8 dest: 65535 src: 1
10:57:44.182	--P->	05 64 08 C4 FF FF 01 00 CF 9C
10:57:44.182		C0 C1 18 9F 70
10:57:44.182		step: 7
10:57:44.182		- Verify that no link layer frames are received within 2000 ms
10:57:46.184		frame receive timeout
10:57:46.184		step: 8
10:57:46.184		- Wait for 5000 milliseconds
10:57:51.184		step: 9
10:57:51.184		- Write the time the Record Current Time request was sent (g50v3, qualifier 0x07) w/ sequence(0x02)
10:57:51.185	--A->	Write(0x02) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02
10:57:51.185		g50v3, 1-Byte Count, count: 1
10:57:51.185		time: 1793185064182
10:57:51.185	--T->	fir: 1 fin: 1 seq: 0
10:57:51.185	--L->	master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 18 dest: 1024 src: 1
10:57:51.185	--P->	05 64 12 C4 00 04 01 00 30 DD
10:57:51.185		C0 C2 02 32 03 07 01 F6 A4 28 82 A1 01 FF E8
10:57:51.186		steps: 10 to 11
10:57:51.186		- Read a single fragment response w/ sequence(0x02)
10:57:51.186		- Verify that the response is empty
10:57:51.186		- Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported)
10:57:51.186		- Verify that the IIN field contains IIN(Broadcast)
10:57:51.186		- Verify that the IIN field does not contain bits IIN(NeedTime)
10:57:51.186		- Confirm each response that asks for a confirmation
10:57:51.186	<-P--	05 64 0A 44 01 00 00 04 67 88
10:57:51.186		C1 C2 81 81 00 52 B3
10:57:51.186	<-L--	master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024
10:57:51.186	<-T--	fir: 1 fin: 1 seq: 1
10:57:51.186	<-A--	Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 IIN(DeviceRestart, Broadcast)
10:57:51.186		step: 12
10:57:51.186		- Trigger an event of a supported timestamped type, recording when it occurs for the timestamp check
10:57:51.186	[PLG]	Updated BI 0: value=true, flags=81, timestamp=1793185071185 (SYNCHRONIZED_TIME)
10:57:51.186		step: 13
10:57:51.186		- Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03
10:57:51.186		- g60v2, All Objects
10:57:51.186		- g60v3, All Objects
10:57:51.186		- g60v4, All Objects
10:57:51.186	--A->	Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03
10:57:51.186		g60v2, All Objects
10:57:51.186		g60v3, All Objects
10:57:51.186		g60v4, All Objects
10:57:51.186	--T->	fir: 1 fin: 1 seq: 0
10:57:51.186	--L->	master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 17 dest: 1024 src: 1
10:57:51.186	--P->	05 64 11 C4 00 04 01 00 60 4E
10:57:51.186		C0 C3 01 3C 02 06 3C 03 06 3C 04 06 0C 0B
10:57:51.186		step: 14
10:57:51.186		- Read any number of valid responses beginning w/ sequence(0x03) and incrementing by 1 modulo 16
10:57:51.186		- Verify that each fragment followed by another, or carrying events, asks for an application layer confirmation.
10:57:51.186		- Verify that the response holds an event that carries its time
10:57:51.186		- Verify that the generated event is in the response and that its timestamp's error from the known event time does not exceed the Device Profile's tolerance
10:57:51.186		- Confirm each response that asks for a confirmation
10:57:51.187	<-P--	05 64 18 44 01 00 00 04 11 D6
10:57:51.187		C2 E3 81 80 00 02 02 28 01 00 00 00 81 51 C0 28 31 D4
10:57:51.187		82 A1 01 3E EC
10:57:51.187	<-L--	master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 24 dest: 1 src: 1024
10:57:51.187	<-T--	fir: 1 fin: 1 seq: 2
10:57:51.187	<-A--	Response(0x81) fir: 1 fin: 1 con: 1 uns: 0 seq: 0x03 IIN(DeviceRestart)
10:57:51.187		g2v2, 2-Byte Count and Index, count: 1
10:57:51.187		[0] - flags: 0x81 time: 1793185071185
10:57:51.187	--A->	Confirm(0x00) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03
10:57:51.187	--T->	fir: 1 fin: 1 seq: 0
10:57:51.187	--L->	master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 8 dest: 1024 src: 1
10:57:51.187	--P->	05 64 08 C4 00 04 01 00 9A 19
10:57:51.187		C0 C3 00 98 26
10:57:51.187	[PLG]	Verified 1 Class 1, 2 and 3 event(s)
10:57:51.187		Passed procedure: 8.7.2