8.1.2 Test Procedure (revision 2.7, subset level 2)

Device under test: Step Function I/O dnp3 outstation

05:24:23.835 Running procedure: 8.1.2
05:24:23.837 step: 1
05:24:23.837 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
05:24:23.837 - g10v0, All Objects
05:24:23.838 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
05:24:23.838 g10v0, All Objects
05:24:23.838 --T-> fir: 1 fin: 1 seq: 0
05:24:23.838 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
05:24:23.838 --P-> 05 64 0B C4 00 04 01 00 CA 8A
05:24:23.838 C0 C0 01 0A 00 06 53 98
05:24:23.838 steps: 2, 3 and 5
05:24:23.838 - Device supports binary output status (g10)
05:24:23.838 - Read any number of valid responses beginning w/ sequence(0x00) and incrementing by 1 modulo 16
05:24:23.838 - Verify that the response contains objects
05:24:23.838 - Verify that the device responds with only variations: Set(g10v2)
05:24:23.838 - Verify that the objects are in start/stop ranges with 1-octet (qualifier 0x00) or 2-octet (qualifier 0x01) indexes
05:24:23.838 - Verify that the flags behave as the note on flags in Section 2 requires (Note 5 in 2.7, Note 6 in 3.1r1).
05:24:23.838 - Confirm each response that asks for a confirmation
05:24:23.839 <-P-- 05 64 25 44 01 00 00 04 07 3D
05:24:23.839 C0 C0 81 90 00 0A 02 01 00 00 13 00 01 01 01 01 3A 43
05:24:23.839 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 BB C3
05:24:23.839 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 37 dest: 1 src: 1024
05:24:23.839 <-T-- fir: 1 fin: 1 seq: 0
05:24:23.840 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 IIN(DeviceRestart, NeedTime)
05:24:23.840 g10v2, 2-Byte Start/Stop, start: 0 stop: 19
05:24:23.840 [0] - flags: 0x01
05:24:23.840 [1] - flags: 0x01
05:24:23.840 [2] - flags: 0x01
05:24:23.840 [3] - flags: 0x01
05:24:23.840 [4] - flags: 0x01
05:24:23.840 [5] - flags: 0x01
05:24:23.840 [6] - flags: 0x01
05:24:23.840 [7] - flags: 0x01
05:24:23.840 [8] - flags: 0x01
05:24:23.840 [9] - flags: 0x01
05:24:23.840 [10] - flags: 0x01
05:24:23.840 [11] - flags: 0x01
05:24:23.840 [12] - flags: 0x01
05:24:23.840 [13] - flags: 0x01
05:24:23.840 [14] - flags: 0x01
05:24:23.840 [15] - flags: 0x01
05:24:23.840 [16] - flags: 0x01
05:24:23.840 [17] - flags: 0x01
05:24:23.840 [18] - flags: 0x01
05:24:23.840 [19] - flags: 0x01
05:24:23.843 Passed procedure: 8.1.2