| 05:28:10.636 | Running procedure: 8.14.2.12 | |
| 05:28:10.637 | This procedure is enabled because the following options: | |
| 05:28:10.637 | - supports.binaryInput == true | |
| 05:28:10.637 | - supports.binaryInputChangeEvents == true | |
| 05:28:10.637 | step: 1 | |
| 05:28:10.637 | - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 | |
| 05:28:10.637 | - g2v0, All Objects | |
| 05:28:10.638 | --A-> | Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 |
| 05:28:10.638 | g2v0, All Objects | |
| 05:28:10.638 | --T-> | fir: 1 fin: 1 seq: 0 |
| 05:28:10.638 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1 |
| 05:28:10.638 | --P-> | 05 64 0B C4 00 04 01 00 CA 8A |
| 05:28:10.638 | C0 C1 01 02 00 06 95 76 | |
| 05:28:10.638 | steps: 2 to 3 | |
| 05:28:10.638 | - Read any number of valid responses beginning w/ sequence(0x01) and incrementing by 1 modulo 16 | |
| 05:28:10.638 | - If the response carries data, verify that it asks for an application layer confirmation. | |
| 05:28:10.638 | - Confirm each response that asks for a confirmation | |
| 05:28:10.638 | <-P-- | 05 64 0A 44 01 00 00 04 67 88 |
| 05:28:10.638 | C0 C1 81 90 00 73 EE | |
| 05:28:10.638 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024 |
| 05:28:10.638 | <-T-- | fir: 1 fin: 1 seq: 0 |
| 05:28:10.638 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 IIN(DeviceRestart, NeedTime) |
| 05:28:10.638 | step: 4 | |
| 05:28:10.638 | - Change binary inputs several times, one or more of them, to create events | |
| 05:28:10.638 | [PLG] | Updated BI 0: value=true, flags=81, timestamp=1793251690638 (UNSYNCHRONIZED_TIME) |
| 05:28:10.638 | [PLG] | Updated BI 1: value=true, flags=81, timestamp=1793251690638 (UNSYNCHRONIZED_TIME) |
| 05:28:10.639 | [PLG] | Updated BI 2: value=true, flags=81, timestamp=1793251690638 (UNSYNCHRONIZED_TIME) |
| 05:28:10.639 | [PLG] | Updated BI 3: value=true, flags=81, timestamp=1793251690639 (UNSYNCHRONIZED_TIME) |
| 05:28:10.639 | [PLG] | Updated BI 4: value=true, flags=81, timestamp=1793251690639 (UNSYNCHRONIZED_TIME) |
| 05:28:10.639 | [PLG] | Updated BI 5: value=true, flags=81, timestamp=1793251690639 (UNSYNCHRONIZED_TIME) |
| 05:28:10.639 | [PLG] | Updated BI 6: value=true, flags=81, timestamp=1793251690639 (UNSYNCHRONIZED_TIME) |
| 05:28:10.639 | [PLG] | Updated BI 7: value=true, flags=81, timestamp=1793251690639 (UNSYNCHRONIZED_TIME) |
| 05:28:10.639 | [PLG] | Updated BI 8: value=true, flags=81, timestamp=1793251690639 (UNSYNCHRONIZED_TIME) |
| 05:28:10.639 | [PLG] | Updated BI 9: value=true, flags=81, timestamp=1793251690639 (UNSYNCHRONIZED_TIME) |
| 05:28:10.639 | The plugin reports the DUT's clock unsynchronized | |
| 05:28:10.639 | step: 5 | |
| 05:28:10.639 | - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 | |
| 05:28:10.639 | - g2v3, All Objects | |
| 05:28:10.639 | --A-> | Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 |
| 05:28:10.639 | g2v3, All Objects | |
| 05:28:10.639 | --T-> | fir: 1 fin: 1 seq: 0 |
| 05:28:10.639 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1 |
| 05:28:10.639 | --P-> | 05 64 0B C4 00 04 01 00 CA 8A |
| 05:28:10.639 | C0 C2 01 02 03 06 34 A3 | |
| 05:28:10.639 | step: 6 | |
| 05:28:10.639 | - The DUT supports the requested relative-time event variation (g2v3). | |
| 05:28:10.639 | steps: 7 to 12 | |
| 05:28:10.639 | - Read a single fragment response w/ sequence(0x02) | |
| 05:28:10.639 | - Verify that the response holds every Binary Input event generated | |
| 05:28:10.639 | - If the events carry timestamps, verify that the gaps between them match the gaps between when the events were generated, to the Device Profile's resolution | |
| 05:28:10.639 | - Verify that an application layer confirmation is requested. | |
| 05:28:10.639 | - Verify that the response contains events of the variations List(g2v3), and besides them only CTOs (g51v1 or g51v2, qualifier 0x07) | |
| 05:28:10.639 | - Verify that the event objects are prefixed with 1-octet (qualifier 0x17) or 2-octet (qualifier 0x28) indexes | |
| 05:28:10.639 | - Verify that each relative-time event is preceded by a CTO object (Table 8-4) | |
| 05:28:10.639 | - Verify that the flags behave as the note on flags in Section 2 requires (Note 5 in 2.7, Note 6 in 3.1r1). | |
| 05:28:10.639 | - Confirm each response that asks for a confirmation | |
| 05:28:10.640 | <-P-- | 05 64 4B 44 01 00 00 04 FD 93 |
| 05:28:10.640 | C1 E2 81 90 00 33 02 07 01 8E 48 21 86 A1 01 02 E0 91 | |
| 05:28:10.640 | 03 28 0A 00 00 00 81 00 00 01 00 81 00 00 02 00 AC 42 | |
| 05:28:10.640 | 81 00 00 03 00 81 01 00 04 00 81 01 00 05 00 81 FF E0 | |
| 05:28:10.640 | 01 00 06 00 81 01 00 07 00 81 01 00 08 00 81 01 12 22 | |
| 05:28:10.640 | 00 09 00 81 01 00 E1 6E | |
| 05:28:10.640 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 75 dest: 1 src: 1024 |
| 05:28:10.640 | <-T-- | fir: 1 fin: 1 seq: 1 |
| 05:28:10.640 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 1 uns: 0 seq: 0x02 IIN(DeviceRestart, NeedTime) |
| 05:28:10.640 | g51v2, 1-Byte Count, count: 1 | |
| 05:28:10.640 | time: 1793251690638 | |
| 05:28:10.640 | g2v3, 2-Byte Count and Index, count: 10 | |
| 05:28:10.640 | [0] - flags: 0x81 cto: 0 | |
| 05:28:10.640 | [1] - flags: 0x81 cto: 0 | |
| 05:28:10.640 | [2] - flags: 0x81 cto: 0 | |
| 05:28:10.640 | [3] - flags: 0x81 cto: 1 | |
| 05:28:10.640 | [4] - flags: 0x81 cto: 1 | |
| 05:28:10.640 | [5] - flags: 0x81 cto: 1 | |
| 05:28:10.640 | [6] - flags: 0x81 cto: 1 | |
| 05:28:10.640 | [7] - flags: 0x81 cto: 1 | |
| 05:28:10.640 | [8] - flags: 0x81 cto: 1 | |
| 05:28:10.640 | [9] - flags: 0x81 cto: 1 | |
| 05:28:10.640 | --A-> | Confirm(0x00) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 |
| 05:28:10.640 | --T-> | fir: 1 fin: 1 seq: 0 |
| 05:28:10.640 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 8 dest: 1024 src: 1 |
| 05:28:10.640 | --P-> | 05 64 08 C4 00 04 01 00 9A 19 |
| 05:28:10.640 | C0 C2 00 D6 8D | |
| 05:28:10.640 | [PLG] | Verified 10 binary input point event(s) |
| 05:28:10.640 | step: 13 | |
| 05:28:10.640 | - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03 | |
| 05:28:10.640 | - g2v0, All Objects | |
| 05:28:10.641 | --A-> | Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03 |
| 05:28:10.641 | g2v0, All Objects | |
| 05:28:10.641 | --T-> | fir: 1 fin: 1 seq: 0 |
| 05:28:10.641 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1 |
| 05:28:10.641 | --P-> | 05 64 0B C4 00 04 01 00 CA 8A |
| 05:28:10.641 | C0 C3 01 02 00 06 99 30 | |
| 05:28:10.641 | step: 14 | |
| 05:28:10.641 | - Read a single fragment response w/ sequence(0x03) | |
| 05:28:10.641 | - Verify that the response is empty | |
| 05:28:10.641 | - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported) | |
| 05:28:10.641 | <-P-- | 05 64 0A 44 01 00 00 04 67 88 |
| 05:28:10.641 | C2 C3 81 90 00 D6 60 | |
| 05:28:10.641 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024 |
| 05:28:10.641 | <-T-- | fir: 1 fin: 1 seq: 2 |
| 05:28:10.641 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03 IIN(DeviceRestart, NeedTime) |
| 05:28:10.641 | Passed procedure: 8.14.2.12 |