| 05:29:51.119 | Running procedure: 8.19.2.2 | |
| 05:29:51.120 | This procedure is enabled because the following options: | |
| 05:29:51.120 | - supports.analogInput == true | |
| 05:29:51.120 | - supports.analogInputChangeEvents == true | |
| 05:29:51.120 | step: 1 | |
| 05:29:51.120 | - Raise an analog input by more than its configured deadband and hold it steady, so that an event is generated | |
| 05:29:51.120 | [PLG] | Updated AI 0: value=100.0, flags=1, timestamp=1793251791120 (UNSYNCHRONIZED_TIME) |
| 05:29:51.120 | [PLG] | Updated AI 1: value=100.0, flags=1, timestamp=1793251791120 (UNSYNCHRONIZED_TIME) |
| 05:29:51.120 | [PLG] | Updated AI 2: value=100.0, flags=1, timestamp=1793251791120 (UNSYNCHRONIZED_TIME) |
| 05:29:51.120 | [PLG] | Updated AI 3: value=100.0, flags=1, timestamp=1793251791120 (UNSYNCHRONIZED_TIME) |
| 05:29:51.121 | [PLG] | Updated AI 4: value=100.0, flags=1, timestamp=1793251791120 (UNSYNCHRONIZED_TIME) |
| 05:29:51.121 | [PLG] | Updated AI 5: value=100.0, flags=1, timestamp=1793251791121 (UNSYNCHRONIZED_TIME) |
| 05:29:51.121 | [PLG] | Updated AI 6: value=100.0, flags=1, timestamp=1793251791121 (UNSYNCHRONIZED_TIME) |
| 05:29:51.121 | [PLG] | Updated AI 7: value=100.0, flags=1, timestamp=1793251791121 (UNSYNCHRONIZED_TIME) |
| 05:29:51.121 | [PLG] | Updated AI 8: value=100.0, flags=1, timestamp=1793251791121 (UNSYNCHRONIZED_TIME) |
| 05:29:51.121 | [PLG] | Updated AI 9: value=100.0, flags=1, timestamp=1793251791121 (UNSYNCHRONIZED_TIME) |
| 05:29:51.121 | step: 2 | |
| 05:29:51.121 | - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 | |
| 05:29:51.121 | - g32v0, All Objects | |
| 05:29:51.121 | --A-> | Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 |
| 05:29:51.121 | g32v0, All Objects | |
| 05:29:51.121 | --T-> | fir: 1 fin: 1 seq: 0 |
| 05:29:51.121 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1 |
| 05:29:51.121 | --P-> | 05 64 0B C4 00 04 01 00 CA 8A |
| 05:29:51.121 | C0 C0 01 20 00 06 68 86 | |
| 05:29:51.122 | steps: 3 to 6 | |
| 05:29:51.122 | - Read a single fragment response w/ sequence(0x00) | |
| 05:29:51.122 | - Verify that the device responds with events, of only Set(g32v1, g32v2) | |
| 05:29:51.122 | - Verify that the objects are prefixed with 1-octet (qualifier 0x17) or 2-octet (qualifier 0x28) indexes | |
| 05:29:51.122 | - Verify that the reported value is the one the analog input was set to | |
| 05:29:51.122 | - Verify that the flags behave as the note on flags in Section 2 requires (Note 5 in 2.7, Note 6 in 3.1r1). | |
| 05:29:51.122 | - Verify that an application layer confirmation is requested. | |
| 05:29:51.122 | <-P-- | 05 64 55 44 01 00 00 04 39 1A |
| 05:29:51.122 | C0 E0 81 90 00 20 01 28 0A 00 00 00 01 64 00 00 D6 FC | |
| 05:29:51.122 | 00 01 00 01 64 00 00 00 02 00 01 64 00 00 00 03 39 99 | |
| 05:29:51.122 | 00 01 64 00 00 00 04 00 01 64 00 00 00 05 00 01 91 5E | |
| 05:29:51.122 | 64 00 00 00 06 00 01 64 00 00 00 07 00 01 64 00 78 60 | |
| 05:29:51.122 | 00 00 08 00 01 64 00 00 00 09 00 01 64 00 00 00 7B EA | |
| 05:29:51.122 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 85 dest: 1 src: 1024 |
| 05:29:51.122 | <-T-- | fir: 1 fin: 1 seq: 0 |
| 05:29:51.122 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 1 uns: 0 seq: 0x00 IIN(DeviceRestart, NeedTime) |
| 05:29:51.122 | g32v1, 2-Byte Count and Index, count: 10 | |
| 05:29:51.122 | [0] - flags: 0x01 value: 100 | |
| 05:29:51.122 | [1] - flags: 0x01 value: 100 | |
| 05:29:51.122 | [2] - flags: 0x01 value: 100 | |
| 05:29:51.122 | [3] - flags: 0x01 value: 100 | |
| 05:29:51.122 | [4] - flags: 0x01 value: 100 | |
| 05:29:51.122 | [5] - flags: 0x01 value: 100 | |
| 05:29:51.122 | [6] - flags: 0x01 value: 100 | |
| 05:29:51.122 | [7] - flags: 0x01 value: 100 | |
| 05:29:51.122 | [8] - flags: 0x01 value: 100 | |
| 05:29:51.122 | [9] - flags: 0x01 value: 100 | |
| 05:29:51.122 | [PLG] | Verified 10 analog input point event(s) |
| 05:29:51.122 | steps: 7 to 8 | |
| 05:29:51.122 | - Expect no response within 6000 ms. | |
| 05:29:57.124 | step: 9 | |
| 05:29:57.124 | - Raise an analog input by more than its configured deadband and hold it steady, so that an event is generated | |
| 05:29:57.124 | [PLG] | Updated AI 0: value=200.0, flags=1, timestamp=1793251797124 (UNSYNCHRONIZED_TIME) |
| 05:29:57.124 | [PLG] | Updated AI 1: value=200.0, flags=1, timestamp=1793251797124 (UNSYNCHRONIZED_TIME) |
| 05:29:57.124 | [PLG] | Updated AI 2: value=200.0, flags=1, timestamp=1793251797124 (UNSYNCHRONIZED_TIME) |
| 05:29:57.124 | [PLG] | Updated AI 3: value=200.0, flags=1, timestamp=1793251797124 (UNSYNCHRONIZED_TIME) |
| 05:29:57.124 | [PLG] | Updated AI 4: value=200.0, flags=1, timestamp=1793251797124 (UNSYNCHRONIZED_TIME) |
| 05:29:57.124 | [PLG] | Updated AI 5: value=200.0, flags=1, timestamp=1793251797124 (UNSYNCHRONIZED_TIME) |
| 05:29:57.124 | [PLG] | Updated AI 6: value=200.0, flags=1, timestamp=1793251797124 (UNSYNCHRONIZED_TIME) |
| 05:29:57.124 | [PLG] | Updated AI 7: value=200.0, flags=1, timestamp=1793251797124 (UNSYNCHRONIZED_TIME) |
| 05:29:57.124 | [PLG] | Updated AI 8: value=200.0, flags=1, timestamp=1793251797124 (UNSYNCHRONIZED_TIME) |
| 05:29:57.125 | [PLG] | Updated AI 9: value=200.0, flags=1, timestamp=1793251797124 (UNSYNCHRONIZED_TIME) |
| 05:29:57.125 | step: 10 | |
| 05:29:57.125 | - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 | |
| 05:29:57.125 | - g32v0, All Objects | |
| 05:29:57.125 | --A-> | Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 |
| 05:29:57.125 | g32v0, All Objects | |
| 05:29:57.125 | --T-> | fir: 1 fin: 1 seq: 0 |
| 05:29:57.125 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1 |
| 05:29:57.125 | --P-> | 05 64 0B C4 00 04 01 00 CA 8A |
| 05:29:57.125 | C0 C1 01 20 00 06 6E A5 | |
| 05:29:57.125 | steps: 11 to 14 | |
| 05:29:57.125 | - Read a single fragment response w/ sequence(0x01) | |
| 05:29:57.125 | - Verify that the device responds with events, of only Set(g32v1, g32v2) | |
| 05:29:57.125 | - Verify that the objects are prefixed with 1-octet (qualifier 0x17) or 2-octet (qualifier 0x28) indexes | |
| 05:29:57.125 | - Verify that the reported value is the one the analog input was set to | |
| 05:29:57.125 | - The DUT may also report the state applied in the first step before reporting the present state. | |
| 05:29:57.125 | - Verify that the flags behave as the note on flags in Section 2 requires (Note 5 in 2.7, Note 6 in 3.1r1). | |
| 05:29:57.125 | - Verify that an application layer confirmation is requested. | |
| 05:29:57.125 | - Confirm each response that asks for a confirmation | |
| 05:29:57.125 | <-P-- | 05 64 9B 44 01 00 00 04 C2 54 |
| 05:29:57.125 | C1 E1 81 90 00 20 01 28 14 00 00 00 01 64 00 00 E7 37 | |
| 05:29:57.125 | 00 01 00 01 64 00 00 00 02 00 01 64 00 00 00 03 39 99 | |
| 05:29:57.125 | 00 01 64 00 00 00 04 00 01 64 00 00 00 05 00 01 91 5E | |
| 05:29:57.125 | 64 00 00 00 06 00 01 64 00 00 00 07 00 01 64 00 78 60 | |
| 05:29:57.125 | 00 00 08 00 01 64 00 00 00 09 00 01 64 00 00 00 7B EA | |
| 05:29:57.125 | 00 00 01 C8 00 00 00 01 00 01 C8 00 00 00 02 00 55 03 | |
| 05:29:57.125 | 01 C8 00 00 00 03 00 01 C8 00 00 00 04 00 01 C8 E4 B3 | |
| 05:29:57.125 | 00 00 00 05 00 01 C8 00 00 00 06 00 01 C8 00 00 AB 6E | |
| 05:29:57.125 | 00 07 00 01 C8 00 00 00 08 00 01 C8 00 00 00 09 A4 4F | |
| 05:29:57.125 | 00 01 C8 00 00 00 64 23 | |
| 05:29:57.125 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 155 dest: 1 src: 1024 |
| 05:29:57.125 | <-T-- | fir: 1 fin: 1 seq: 1 |
| 05:29:57.126 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 1 uns: 0 seq: 0x01 IIN(DeviceRestart, NeedTime) |
| 05:29:57.126 | g32v1, 2-Byte Count and Index, count: 20 | |
| 05:29:57.126 | [0] - flags: 0x01 value: 100 | |
| 05:29:57.126 | [1] - flags: 0x01 value: 100 | |
| 05:29:57.126 | [2] - flags: 0x01 value: 100 | |
| 05:29:57.126 | [3] - flags: 0x01 value: 100 | |
| 05:29:57.126 | [4] - flags: 0x01 value: 100 | |
| 05:29:57.126 | [5] - flags: 0x01 value: 100 | |
| 05:29:57.126 | [6] - flags: 0x01 value: 100 | |
| 05:29:57.126 | [7] - flags: 0x01 value: 100 | |
| 05:29:57.126 | [8] - flags: 0x01 value: 100 | |
| 05:29:57.126 | [9] - flags: 0x01 value: 100 | |
| 05:29:57.126 | [0] - flags: 0x01 value: 200 | |
| 05:29:57.126 | [1] - flags: 0x01 value: 200 | |
| 05:29:57.126 | [2] - flags: 0x01 value: 200 | |
| 05:29:57.126 | [3] - flags: 0x01 value: 200 | |
| 05:29:57.126 | [4] - flags: 0x01 value: 200 | |
| 05:29:57.126 | [5] - flags: 0x01 value: 200 | |
| 05:29:57.126 | [6] - flags: 0x01 value: 200 | |
| 05:29:57.126 | [7] - flags: 0x01 value: 200 | |
| 05:29:57.126 | [8] - flags: 0x01 value: 200 | |
| 05:29:57.126 | [9] - flags: 0x01 value: 200 | |
| 05:29:57.126 | --A-> | Confirm(0x00) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 |
| 05:29:57.126 | --T-> | fir: 1 fin: 1 seq: 0 |
| 05:29:57.126 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 8 dest: 1024 src: 1 |
| 05:29:57.126 | --P-> | 05 64 08 C4 00 04 01 00 9A 19 |
| 05:29:57.126 | C0 C1 00 7D 3D | |
| 05:29:57.127 | [PLG] | Verified the current value of 10 analog input(s) |
| 05:29:57.127 | step: 15 | |
| 05:29:57.127 | - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 | |
| 05:29:57.127 | - g32v0, All Objects | |
| 05:29:57.127 | --A-> | Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 |
| 05:29:57.127 | g32v0, All Objects | |
| 05:29:57.127 | --T-> | fir: 1 fin: 1 seq: 0 |
| 05:29:57.127 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1 |
| 05:29:57.127 | --P-> | 05 64 0B C4 00 04 01 00 CA 8A |
| 05:29:57.127 | C0 C2 01 20 00 06 64 C0 | |
| 05:29:57.127 | step: 16 | |
| 05:29:57.127 | - Read a single fragment response w/ sequence(0x02) | |
| 05:29:57.127 | - Verify that the response is empty | |
| 05:29:57.127 | - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported) | |
| 05:29:57.127 | <-P-- | 05 64 0A 44 01 00 00 04 67 88 |
| 05:29:57.127 | C2 C2 81 90 00 3E A2 | |
| 05:29:57.127 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024 |
| 05:29:57.127 | <-T-- | fir: 1 fin: 1 seq: 2 |
| 05:29:57.127 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 IIN(DeviceRestart, NeedTime) |
| 05:29:57.128 | Passed procedure: 8.19.2.2 |