8.2.1.2.11 Binary Output, SBO, Same Sequence Number Select Retries (revision 2.7, subset level 2)

Device under test: Step Function I/O dnp3 outstation

All results
05:24:37.410 Running procedure: 8.2.1.2.11
05:24:37.412 This procedure is enabled because the following options:
05:24:37.412 - supports.binaryOutput.commands == true
05:24:37.412 step: 2
05:24:37.412 - Select(0x03) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
05:24:37.412 - g12v1, 1-Byte Count and Index, count: 1
05:24:37.412 - [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
05:24:37.412 --A-> Select(0x03) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
05:24:37.412 g12v1, 1-Byte Count and Index, count: 1
05:24:37.412 [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
05:24:37.413 --T-> fir: 1 fin: 1 seq: 0
05:24:37.413 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 24 dest: 1024 src: 1
05:24:37.413 --P-> 05 64 18 C4 00 04 01 00 5B 61
05:24:37.413 C0 C0 03 0C 01 17 01 00 03 01 64 00 00 00 C8 00 FD 11
05:24:37.413 00 00 00 FF FF
05:24:37.414 step: 3
05:24:37.414 - Read a single fragment response w/ sequence(0x00)
05:24:37.414 - Verify the response contains the exact object header:
05:24:37.414 - g12v1, 1-Byte Count and Index, count: 1
05:24:37.414 - [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
05:24:37.414 - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported)
05:24:37.414 <-P-- 05 64 1A 44 01 00 00 04 A6 F0
05:24:37.414 C0 C0 81 90 00 0C 01 17 01 00 03 01 64 00 00 00 9C 9A
05:24:37.414 C8 00 00 00 00 78 FB
05:24:37.414 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 26 dest: 1 src: 1024
05:24:37.414 <-T-- fir: 1 fin: 1 seq: 0
05:24:37.414 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 IIN(DeviceRestart, NeedTime)
05:24:37.414 g12v1, 1-Byte Count and Index, count: 1
05:24:37.414 [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
05:24:37.414 step: 4
05:24:37.414 - Select(0x03) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
05:24:37.414 - g12v1, 1-Byte Count and Index, count: 1
05:24:37.414 - [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
05:24:37.414 --A-> Select(0x03) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
05:24:37.414 g12v1, 1-Byte Count and Index, count: 1
05:24:37.414 [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
05:24:37.415 --T-> fir: 1 fin: 1 seq: 0
05:24:37.415 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 24 dest: 1024 src: 1
05:24:37.415 --P-> 05 64 18 C4 00 04 01 00 5B 61
05:24:37.415 C0 C0 03 0C 01 17 01 00 03 01 64 00 00 00 C8 00 FD 11
05:24:37.415 00 00 00 FF FF
05:24:37.415 step: 5
05:24:37.415 - Read a single fragment response w/ sequence(0x00)
05:24:37.415 - Verify the response contains the exact object header:
05:24:37.415 - g12v1, 1-Byte Count and Index, count: 1
05:24:37.415 - [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
05:24:37.415 - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported)
05:24:37.415 <-P-- 05 64 1A 44 01 00 00 04 A6 F0
05:24:37.415 C1 C0 81 90 00 0C 01 17 01 00 03 01 64 00 00 00 10 D7
05:24:37.415 C8 00 00 00 00 78 FB
05:24:37.415 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 26 dest: 1 src: 1024
05:24:37.415 <-T-- fir: 1 fin: 1 seq: 1
05:24:37.415 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 IIN(DeviceRestart, NeedTime)
05:24:37.415 g12v1, 1-Byte Count and Index, count: 1
05:24:37.415 [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
05:24:37.416 step: 6
05:24:37.416 - Operate(0x04) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
05:24:37.416 - g12v1, 1-Byte Count and Index, count: 1
05:24:37.416 - [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
05:24:37.416 --A-> Operate(0x04) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
05:24:37.416 g12v1, 1-Byte Count and Index, count: 1
05:24:37.416 [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
05:24:37.416 --T-> fir: 1 fin: 1 seq: 0
05:24:37.416 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 24 dest: 1024 src: 1
05:24:37.416 --P-> 05 64 18 C4 00 04 01 00 5B 61
05:24:37.416 C0 C1 04 0C 01 17 01 00 03 01 64 00 00 00 C8 00 35 C7
05:24:37.416 00 00 00 FF FF
05:24:37.416 step: 7
05:24:37.416 - Read a single fragment response w/ sequence(0x01)
05:24:37.416 - Verify the response contains the exact object header:
05:24:37.416 - g12v1, 1-Byte Count and Index, count: 1
05:24:37.416 - [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
05:24:37.416 - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported)
05:24:37.417 <-P-- 05 64 1A 44 01 00 00 04 A6 F0
05:24:37.417 C2 C1 81 90 00 0C 01 17 01 00 03 01 64 00 00 00 9C 6F
05:24:37.417 C8 00 00 00 00 78 FB
05:24:37.417 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 26 dest: 1 src: 1024
05:24:37.417 <-T-- fir: 1 fin: 1 seq: 2
05:24:37.417 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 IIN(DeviceRestart, NeedTime)
05:24:37.417 g12v1, 1-Byte Count and Index, count: 1
05:24:37.417 [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
05:24:37.417 step: 8
05:24:37.417 - Check that binary control point 0 operate
05:24:37.417 [PLG] Binary output 0 did operate
05:24:37.417 Passed procedure: 8.2.1.2.11