05:24:45.261		Running procedure: 8.2.3.2.1
05:24:45.263		step: 1
05:24:45.263		- Direct Operate No Ack(0x06) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
05:24:45.263		- g12v1, 1-Byte Count and Index, count: 1
05:24:45.263		- [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
05:24:45.263	--A->	Direct Operate No Ack(0x06) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
05:24:45.263		g12v1, 1-Byte Count and Index, count: 1
05:24:45.263		[0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
05:24:45.263	--T->	fir: 1 fin: 1 seq: 0
05:24:45.264	--L->	master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 24 dest: 1024 src: 1
05:24:45.264	--P->	05 64 18 C4 00 04 01 00 5B 61
05:24:45.264		C0 C0 06 0C 01 17 01 00 03 01 64 00 00 00 C8 00 CD D4
05:24:45.264		00 00 00 FF FF
05:24:45.264		step: 2
05:24:45.264		- Verify that no link layer frames are received within 2000 ms
05:24:47.266		frame receive timeout
05:24:47.266		step: 3
05:24:47.266		- For a DUT without binary outputs, this section ends here
05:24:47.267		step: 4
05:24:47.267		- Check that binary control point 0 operate
05:24:47.267	[PLG]	Binary output 0 did operate
05:24:47.267		Passed procedure: 8.2.3.2.1