05:29:57.834		Running procedure: 8.21.2.2
05:29:57.835		This procedure is enabled because the following options:
05:29:57.835		- supports.doubleBitInput == true
05:29:57.835		- supports.disable.doubleBitInput == true
05:29:57.835		step: 1
05:29:57.835		- The DUT's double-bit inputs can be uninstalled or disabled through its configuration
05:29:57.835		step: 2
05:29:57.835		- Uninstall or disable every double-bit binary input point on the DUT
05:29:57.835	[PLG]	All double-bit binary input points were uninstalled
05:29:57.835	[PLG]	Cycling power
05:29:57.837		step: 3
05:29:57.837		- Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
05:29:57.837		- g3v0, All Objects
05:29:57.837	--A->	Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
05:29:57.837		g3v0, All Objects
05:29:57.837	--T->	fir: 1 fin: 1 seq: 0
05:29:57.837	--L->	master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
05:29:57.837	--P->	05 64 0B C4 00 04 01 00 CA 8A
05:29:57.837		C0 C0 01 03 00 06 2B 4C
05:29:57.837		step: 4
05:29:57.837		- Read a single fragment response w/ sequence(0x00)
05:29:57.837		- Verify that the response is a Null Response, or an Error Response whose only error bits are IIN(ObjectUnknown)
05:29:57.837	<-P--	05 64 0A 44 01 00 00 04 67 88
05:29:57.837		C0 C0 81 90 02 27 40
05:29:57.837	<-L--	master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024
05:29:57.837	<-T--	fir: 1 fin: 1 seq: 0
05:29:57.838	<-A--	Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 IIN(DeviceRestart, NeedTime, ObjectUnknown)
05:29:57.838		Passed procedure: 8.21.2.2
05:29:57.838		restore
05:29:57.838		- Reinstall or re-enable the points that were uninstalled or disabled, so later procedures can use them
05:29:57.838	[PLG]	All points were reinstalled
05:29:57.838	[PLG]	Cycling power