| 05:30:06.160 | Running procedure: 8.22.2.11 | |
| 05:30:06.161 | This procedure is enabled because the following options: | |
| 05:30:06.161 | - supports.doubleBitInput == true | |
| 05:30:06.161 | - supports.doubleBitInputChangeEvents == true | |
| 05:30:06.161 | - timesync.doubleBitInputChangeWithTime == true | |
| 05:30:06.161 | step: 1 | |
| 05:30:06.161 | - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 | |
| 05:30:06.161 | - g4v0, All Objects | |
| 05:30:06.161 | --A-> | Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 |
| 05:30:06.161 | g4v0, All Objects | |
| 05:30:06.161 | --T-> | fir: 1 fin: 1 seq: 0 |
| 05:30:06.161 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1 |
| 05:30:06.161 | --P-> | 05 64 0B C4 00 04 01 00 CA 8A |
| 05:30:06.161 | C0 C1 01 04 00 06 05 23 | |
| 05:30:06.161 | steps: 2 to 3 | |
| 05:30:06.161 | - Read any number of valid responses beginning w/ sequence(0x01) and incrementing by 1 modulo 16 | |
| 05:30:06.161 | - If the response carries data, verify that it asks for an application layer confirmation. | |
| 05:30:06.161 | - Confirm each response that asks for a confirmation | |
| 05:30:06.162 | <-P-- | 05 64 0A 44 01 00 00 04 67 88 |
| 05:30:06.162 | C0 C1 81 90 00 73 EE | |
| 05:30:06.162 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024 |
| 05:30:06.162 | <-T-- | fir: 1 fin: 1 seq: 0 |
| 05:30:06.162 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 IIN(DeviceRestart, NeedTime) |
| 05:30:06.162 | step: 4 | |
| 05:30:06.162 | - Generate 10 Double-bit Binary Input Change Event(s) | |
| 05:30:06.162 | [PLG] | Updated DBBI 0: value=DETERMINED_ON, flags=81, timestamp=1793251806162 (UNSYNCHRONIZED_TIME) |
| 05:30:06.162 | [PLG] | Updated DBBI 0: value=DETERMINED_OFF, flags=41, timestamp=1793251806162 (UNSYNCHRONIZED_TIME) |
| 05:30:06.162 | [PLG] | Updated DBBI 0: value=DETERMINED_ON, flags=81, timestamp=1793251806162 (UNSYNCHRONIZED_TIME) |
| 05:30:06.162 | [PLG] | Updated DBBI 0: value=DETERMINED_OFF, flags=41, timestamp=1793251806162 (UNSYNCHRONIZED_TIME) |
| 05:30:06.162 | [PLG] | Updated DBBI 0: value=DETERMINED_ON, flags=81, timestamp=1793251806162 (UNSYNCHRONIZED_TIME) |
| 05:30:06.162 | [PLG] | Updated DBBI 0: value=DETERMINED_OFF, flags=41, timestamp=1793251806162 (UNSYNCHRONIZED_TIME) |
| 05:30:06.162 | [PLG] | Updated DBBI 0: value=DETERMINED_ON, flags=81, timestamp=1793251806162 (UNSYNCHRONIZED_TIME) |
| 05:30:06.162 | [PLG] | Updated DBBI 0: value=DETERMINED_OFF, flags=41, timestamp=1793251806162 (UNSYNCHRONIZED_TIME) |
| 05:30:06.162 | [PLG] | Updated DBBI 0: value=DETERMINED_ON, flags=81, timestamp=1793251806162 (UNSYNCHRONIZED_TIME) |
| 05:30:06.162 | [PLG] | Updated DBBI 0: value=DETERMINED_OFF, flags=41, timestamp=1793251806162 (UNSYNCHRONIZED_TIME) |
| 05:30:06.162 | The plugin reports the DUT's clock unsynchronized | |
| 05:30:06.162 | step: 5 | |
| 05:30:06.162 | - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 | |
| 05:30:06.162 | - g4v2, 2-Byte Count, count: 1 | |
| 05:30:06.162 | --A-> | Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 |
| 05:30:06.162 | g4v2, 2-Byte Count, count: 1 | |
| 05:30:06.163 | --T-> | fir: 1 fin: 1 seq: 0 |
| 05:30:06.163 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 13 dest: 1024 src: 1 |
| 05:30:06.163 | --P-> | 05 64 0D C4 00 04 01 00 13 E1 |
| 05:30:06.163 | C0 C2 01 04 02 08 01 00 E2 6C | |
| 05:30:06.163 | steps: 6 to 11 | |
| 05:30:06.163 | - Read a single fragment response w/ sequence(0x02) | |
| 05:30:06.163 | - Verify the device responds with the first Double-bit Binary event | |
| 05:30:06.163 | - If the events carry timestamps, verify that the gaps between them match the gaps between when the events were generated, to the Device Profile's resolution | |
| 05:30:06.163 | - Verify that an application layer confirmation is requested. | |
| 05:30:06.163 | - Verify that the events are reported as TB2017-003a 5.1.3.1.2 requires, which the DUT implements: g4v2 for events recorded while the clock was synchronized, g4v3 after g51v2 for those recorded while it was unsynchronized, by the clock's state as the plugin reports it | |
| 05:30:06.163 | - Verify that the flags behave as the note on flags in Section 2 requires (Note 5 in 2.7, Note 6 in 3.1r1). | |
| 05:30:06.163 | - Confirm each response that asks for a confirmation | |
| 05:30:06.163 | <-P-- | 05 64 1E 44 01 00 00 04 C8 BD |
| 05:30:06.163 | C1 E2 81 92 00 33 02 07 01 D2 0B 23 86 A1 01 04 3F AB | |
| 05:30:06.163 | 03 28 01 00 00 00 81 00 00 9A 2A | |
| 05:30:06.163 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 30 dest: 1 src: 1024 |
| 05:30:06.163 | <-T-- | fir: 1 fin: 1 seq: 1 |
| 05:30:06.163 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 1 uns: 0 seq: 0x02 IIN(DeviceRestart, NeedTime, Class1Events) |
| 05:30:06.163 | g51v2, 1-Byte Count, count: 1 | |
| 05:30:06.163 | time: 1793251806162 | |
| 05:30:06.163 | g4v3, 2-Byte Count and Index, count: 1 | |
| 05:30:06.163 | [0] - flags: 0x81 cto: 0 | |
| 05:30:06.163 | --A-> | Confirm(0x00) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 |
| 05:30:06.163 | --T-> | fir: 1 fin: 1 seq: 0 |
| 05:30:06.163 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 8 dest: 1024 src: 1 |
| 05:30:06.163 | --P-> | 05 64 08 C4 00 04 01 00 9A 19 |
| 05:30:06.163 | C0 C2 00 D6 8D | |
| 05:30:06.163 | [PLG] | Verified first double-bit binary input point event |
| 05:30:06.163 | Note on the result: The events were checked as TB2017-003a 5.1.3.1.2 requires, which the DUT implements, in place of the steps' g4v2 only | |
| 05:30:06.164 | step: 12 | |
| 05:30:06.164 | - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03 | |
| 05:30:06.164 | - g4v2, 2-Byte Count, count: 9 | |
| 05:30:06.164 | --A-> | Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03 |
| 05:30:06.164 | g4v2, 2-Byte Count, count: 9 | |
| 05:30:06.164 | --T-> | fir: 1 fin: 1 seq: 0 |
| 05:30:06.164 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 13 dest: 1024 src: 1 |
| 05:30:06.164 | --P-> | 05 64 0D C4 00 04 01 00 13 E1 |
| 05:30:06.164 | C0 C3 01 04 02 08 09 00 14 5C | |
| 05:30:06.164 | steps: 13 to 15 | |
| 05:30:06.164 | - Read a single fragment response w/ sequence(0x03) | |
| 05:30:06.164 | - Verify that the response holds the Double-bit Binary events generated that weren't reported before | |
| 05:30:06.164 | - If the events carry timestamps, verify that the gaps between them match the gaps between when the events were generated, to the Device Profile's resolution | |
| 05:30:06.164 | - Verify that an application layer confirmation is requested. | |
| 05:30:06.164 | - Verify that the events are reported as TB2017-003a 5.1.3.1.2 requires, which the DUT implements: g4v2 for events recorded while the clock was synchronized, g4v3 after g51v2 for those recorded while it was unsynchronized, by the clock's state as the plugin reports it | |
| 05:30:06.164 | - Verify that the flags behave as the note on flags in Section 2 requires (Note 5 in 2.7, Note 6 in 3.1r1). | |
| 05:30:06.164 | - Confirm each response that asks for a confirmation | |
| 05:30:06.165 | <-P-- | 05 64 46 44 01 00 00 04 A8 F1 |
| 05:30:06.165 | C2 E3 81 90 00 33 02 07 01 D2 0B 23 86 A1 01 04 C5 AD | |
| 05:30:06.165 | 03 28 09 00 00 00 41 00 00 00 00 81 00 00 00 00 09 E8 | |
| 05:30:06.165 | 41 00 00 00 00 81 00 00 00 00 41 00 00 00 00 81 B2 55 | |
| 05:30:06.165 | 00 00 00 00 41 00 00 00 00 81 00 00 00 00 41 00 4F 13 | |
| 05:30:06.165 | 00 FF FF | |
| 05:30:06.165 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 70 dest: 1 src: 1024 |
| 05:30:06.165 | <-T-- | fir: 1 fin: 1 seq: 2 |
| 05:30:06.165 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 1 uns: 0 seq: 0x03 IIN(DeviceRestart, NeedTime) |
| 05:30:06.165 | g51v2, 1-Byte Count, count: 1 | |
| 05:30:06.165 | time: 1793251806162 | |
| 05:30:06.165 | g4v3, 2-Byte Count and Index, count: 9 | |
| 05:30:06.165 | [0] - flags: 0x41 cto: 0 | |
| 05:30:06.165 | [0] - flags: 0x81 cto: 0 | |
| 05:30:06.165 | [0] - flags: 0x41 cto: 0 | |
| 05:30:06.165 | [0] - flags: 0x81 cto: 0 | |
| 05:30:06.165 | [0] - flags: 0x41 cto: 0 | |
| 05:30:06.165 | [0] - flags: 0x81 cto: 0 | |
| 05:30:06.165 | [0] - flags: 0x41 cto: 0 | |
| 05:30:06.165 | [0] - flags: 0x81 cto: 0 | |
| 05:30:06.165 | [0] - flags: 0x41 cto: 0 | |
| 05:30:06.165 | --A-> | Confirm(0x00) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03 |
| 05:30:06.165 | --T-> | fir: 1 fin: 1 seq: 0 |
| 05:30:06.165 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 8 dest: 1024 src: 1 |
| 05:30:06.165 | --P-> | 05 64 08 C4 00 04 01 00 9A 19 |
| 05:30:06.165 | C0 C3 00 98 26 | |
| 05:30:06.165 | [PLG] | Verified 9 double-bit binary input point event(s) |
| 05:30:06.166 | step: 16 | |
| 05:30:06.166 | - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x04 | |
| 05:30:06.166 | - g4v0, All Objects | |
| 05:30:06.166 | --A-> | Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x04 |
| 05:30:06.166 | g4v0, All Objects | |
| 05:30:06.166 | --T-> | fir: 1 fin: 1 seq: 0 |
| 05:30:06.166 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1 |
| 05:30:06.166 | --P-> | 05 64 0B C4 00 04 01 00 CA 8A |
| 05:30:06.166 | C0 C4 01 04 00 06 1B 8C | |
| 05:30:06.166 | step: 17 | |
| 05:30:06.166 | - Read a single fragment response w/ sequence(0x04) | |
| 05:30:06.166 | - Verify that the response is empty | |
| 05:30:06.166 | - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported) | |
| 05:30:06.166 | <-P-- | 05 64 0A 44 01 00 00 04 67 88 |
| 05:30:06.166 | C3 C4 81 90 00 BA 95 | |
| 05:30:06.166 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024 |
| 05:30:06.166 | <-T-- | fir: 1 fin: 1 seq: 3 |
| 05:30:06.166 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x04 IIN(DeviceRestart, NeedTime) |
| 05:30:06.167 | Passed procedure: 8.22.2.11 |