| 05:29:58.063 | Running procedure: 8.22.2.2 | |
| 05:29:58.064 | This procedure is enabled because the following options: | |
| 05:29:58.064 | - supports.doubleBitInput == true | |
| 05:29:58.064 | - supports.doubleBitInputChangeEvents == true | |
| 05:29:58.065 | step: 1 | |
| 05:29:58.065 | - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 | |
| 05:29:58.065 | - g4v0, All Objects | |
| 05:29:58.065 | --A-> | Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 |
| 05:29:58.065 | g4v0, All Objects | |
| 05:29:58.065 | --T-> | fir: 1 fin: 1 seq: 0 |
| 05:29:58.065 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1 |
| 05:29:58.065 | --P-> | 05 64 0B C4 00 04 01 00 CA 8A |
| 05:29:58.065 | C0 C1 01 04 00 06 05 23 | |
| 05:29:58.065 | step: 2 | |
| 05:29:58.065 | - Read any number of valid responses beginning w/ sequence(0x01) and incrementing by 1 modulo 16 | |
| 05:29:58.065 | - If the response carries data, verify that it asks for an application layer confirmation. | |
| 05:29:58.065 | - Confirm each response that asks for a confirmation | |
| 05:29:58.065 | <-P-- | 05 64 0A 44 01 00 00 04 67 88 |
| 05:29:58.065 | C0 C1 81 90 00 73 EE | |
| 05:29:58.065 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024 |
| 05:29:58.065 | <-T-- | fir: 1 fin: 1 seq: 0 |
| 05:29:58.065 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 IIN(DeviceRestart, NeedTime) |
| 05:29:58.065 | step: 3 | |
| 05:29:58.065 | - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 | |
| 05:29:58.065 | - g4v0, All Objects | |
| 05:29:58.065 | --A-> | Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 |
| 05:29:58.065 | g4v0, All Objects | |
| 05:29:58.065 | --T-> | fir: 1 fin: 1 seq: 0 |
| 05:29:58.065 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1 |
| 05:29:58.065 | --P-> | 05 64 0B C4 00 04 01 00 CA 8A |
| 05:29:58.065 | C0 C2 01 04 00 06 0F 46 | |
| 05:29:58.066 | step: 4 | |
| 05:29:58.066 | - Read a single fragment response w/ sequence(0x02) | |
| 05:29:58.066 | - Verify that the response is empty | |
| 05:29:58.066 | - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported) | |
| 05:29:58.066 | <-P-- | 05 64 0A 44 01 00 00 04 67 88 |
| 05:29:58.066 | C1 C2 81 90 00 34 C7 | |
| 05:29:58.066 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024 |
| 05:29:58.066 | <-T-- | fir: 1 fin: 1 seq: 1 |
| 05:29:58.066 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 IIN(DeviceRestart, NeedTime) |
| 05:29:58.066 | step: 5 | |
| 05:29:58.066 | - Change double-bit binary inputs several times, one or more of them, to create events | |
| 05:29:58.066 | [PLG] | Updated DBBI 0: value=DETERMINED_ON, flags=81, timestamp=1793251798066 (UNSYNCHRONIZED_TIME) |
| 05:29:58.066 | [PLG] | Updated DBBI 1: value=DETERMINED_ON, flags=81, timestamp=1793251798066 (UNSYNCHRONIZED_TIME) |
| 05:29:58.066 | [PLG] | Updated DBBI 2: value=DETERMINED_ON, flags=81, timestamp=1793251798066 (UNSYNCHRONIZED_TIME) |
| 05:29:58.066 | [PLG] | Updated DBBI 3: value=DETERMINED_ON, flags=81, timestamp=1793251798066 (UNSYNCHRONIZED_TIME) |
| 05:29:58.066 | [PLG] | Updated DBBI 4: value=DETERMINED_ON, flags=81, timestamp=1793251798066 (UNSYNCHRONIZED_TIME) |
| 05:29:58.066 | [PLG] | Updated DBBI 5: value=DETERMINED_ON, flags=81, timestamp=1793251798066 (UNSYNCHRONIZED_TIME) |
| 05:29:58.066 | [PLG] | Updated DBBI 6: value=DETERMINED_ON, flags=81, timestamp=1793251798066 (UNSYNCHRONIZED_TIME) |
| 05:29:58.066 | [PLG] | Updated DBBI 7: value=DETERMINED_ON, flags=81, timestamp=1793251798066 (UNSYNCHRONIZED_TIME) |
| 05:29:58.066 | [PLG] | Updated DBBI 8: value=DETERMINED_ON, flags=81, timestamp=1793251798066 (UNSYNCHRONIZED_TIME) |
| 05:29:58.067 | [PLG] | Updated DBBI 9: value=DETERMINED_ON, flags=81, timestamp=1793251798066 (UNSYNCHRONIZED_TIME) |
| 05:29:58.067 | The plugin reports the DUT's clock unsynchronized | |
| 05:29:58.067 | step: 6 | |
| 05:29:58.067 | - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03 | |
| 05:29:58.067 | - g4v0, All Objects | |
| 05:29:58.067 | --A-> | Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03 |
| 05:29:58.067 | g4v0, All Objects | |
| 05:29:58.067 | --T-> | fir: 1 fin: 1 seq: 0 |
| 05:29:58.067 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1 |
| 05:29:58.067 | --P-> | 05 64 0B C4 00 04 01 00 CA 8A |
| 05:29:58.067 | C0 C3 01 04 00 06 09 65 | |
| 05:29:58.067 | steps: 7 to 11 | |
| 05:29:58.067 | - Read a single fragment response w/ sequence(0x03) | |
| 05:29:58.067 | - Verify that the response holds every Double-bit Binary event generated | |
| 05:29:58.067 | - If the events carry timestamps, verify that the gaps between them match the gaps between when the events were generated, to the Device Profile's resolution | |
| 05:29:58.067 | - Verify that an application layer confirmation is requested. | |
| 05:29:58.067 | - Verify that the response contains events of the variations List(g4v1, g4v2, g4v3), and besides them only CTOs (g51v1 or g51v2, qualifier 0x07) | |
| 05:29:58.067 | - Verify that the event objects are prefixed with 1-octet (qualifier 0x17) or 2-octet (qualifier 0x28) indexes | |
| 05:29:58.067 | - Verify that each relative-time event is preceded by a CTO object (Table 8-4) | |
| 05:29:58.067 | - Verify that the flags behave as the note on flags in Section 2 requires (Note 5 in 2.7, Note 6 in 3.1r1). | |
| 05:29:58.067 | - Confirm each response that asks for a confirmation | |
| 05:29:58.067 | <-P-- | 05 64 2D 44 01 00 00 04 DB A7 |
| 05:29:58.067 | C2 E3 81 90 00 04 01 28 0A 00 00 00 81 01 00 81 6E 4B | |
| 05:29:58.067 | 02 00 81 03 00 81 04 00 81 05 00 81 06 00 81 07 7C AC | |
| 05:29:58.067 | 00 81 08 00 81 09 00 81 A0 4C | |
| 05:29:58.067 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 45 dest: 1 src: 1024 |
| 05:29:58.067 | <-T-- | fir: 1 fin: 1 seq: 2 |
| 05:29:58.067 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 1 uns: 0 seq: 0x03 IIN(DeviceRestart, NeedTime) |
| 05:29:58.067 | g4v1, 2-Byte Count and Index, count: 10 | |
| 05:29:58.067 | [0] - flags: 0x81 | |
| 05:29:58.067 | [1] - flags: 0x81 | |
| 05:29:58.067 | [2] - flags: 0x81 | |
| 05:29:58.067 | [3] - flags: 0x81 | |
| 05:29:58.067 | [4] - flags: 0x81 | |
| 05:29:58.067 | [5] - flags: 0x81 | |
| 05:29:58.067 | [6] - flags: 0x81 | |
| 05:29:58.067 | [7] - flags: 0x81 | |
| 05:29:58.067 | [8] - flags: 0x81 | |
| 05:29:58.067 | [9] - flags: 0x81 | |
| 05:29:58.067 | --A-> | Confirm(0x00) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03 |
| 05:29:58.067 | --T-> | fir: 1 fin: 1 seq: 0 |
| 05:29:58.067 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 8 dest: 1024 src: 1 |
| 05:29:58.067 | --P-> | 05 64 08 C4 00 04 01 00 9A 19 |
| 05:29:58.067 | C0 C3 00 98 26 | |
| 05:29:58.068 | [PLG] | Verified 10 double-bit binary input point event(s) |
| 05:29:58.068 | step: 12 | |
| 05:29:58.068 | - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x04 | |
| 05:29:58.068 | - g4v0, All Objects | |
| 05:29:58.068 | --A-> | Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x04 |
| 05:29:58.068 | g4v0, All Objects | |
| 05:29:58.068 | --T-> | fir: 1 fin: 1 seq: 0 |
| 05:29:58.068 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1 |
| 05:29:58.068 | --P-> | 05 64 0B C4 00 04 01 00 CA 8A |
| 05:29:58.068 | C0 C4 01 04 00 06 1B 8C | |
| 05:29:58.069 | step: 13 | |
| 05:29:58.069 | - Read a single fragment response w/ sequence(0x04) | |
| 05:29:58.069 | - Verify that the response is empty | |
| 05:29:58.069 | - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported) | |
| 05:29:58.069 | <-P-- | 05 64 0A 44 01 00 00 04 67 88 |
| 05:29:58.069 | C3 C4 81 90 00 BA 95 | |
| 05:29:58.069 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024 |
| 05:29:58.069 | <-T-- | fir: 1 fin: 1 seq: 3 |
| 05:29:58.069 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x04 IIN(DeviceRestart, NeedTime) |
| 05:29:58.069 | Passed procedure: 8.22.2.2 |