8.22.2.3 Double-bit Input Change, 0x07 (revision 2.7, subset level 2)

Device under test: Step Function I/O dnp3 outstation

05:29:58.298 Running procedure: 8.22.2.3
05:29:58.299 This procedure is enabled because the following options:
05:29:58.299 - supports.doubleBitInput == true
05:29:58.299 - supports.doubleBitInputChangeEvents == true
05:29:58.299 step: 1
05:29:58.299 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
05:29:58.299 - g4v0, All Objects
05:29:58.299 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
05:29:58.299 g4v0, All Objects
05:29:58.299 --T-> fir: 1 fin: 1 seq: 0
05:29:58.299 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
05:29:58.299 --P-> 05 64 0B C4 00 04 01 00 CA 8A
05:29:58.299 C0 C1 01 04 00 06 05 23
05:29:58.300 steps: 2 to 3
05:29:58.300 - Read any number of valid responses beginning w/ sequence(0x01) and incrementing by 1 modulo 16
05:29:58.300 - If the response carries data, verify that it asks for an application layer confirmation.
05:29:58.300 - Confirm each response that asks for a confirmation
05:29:58.300 <-P-- 05 64 0A 44 01 00 00 04 67 88
05:29:58.300 C0 C1 81 90 00 73 EE
05:29:58.300 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024
05:29:58.300 <-T-- fir: 1 fin: 1 seq: 0
05:29:58.300 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 IIN(DeviceRestart, NeedTime)
05:29:58.300 step: 4
05:29:58.300 - Generate 10 Double-bit Binary Input Change Event(s)
05:29:58.300 [PLG] Updated DBBI 0: value=DETERMINED_ON, flags=81, timestamp=1793251798300 (UNSYNCHRONIZED_TIME)
05:29:58.300 [PLG] Updated DBBI 0: value=DETERMINED_OFF, flags=41, timestamp=1793251798300 (UNSYNCHRONIZED_TIME)
05:29:58.300 [PLG] Updated DBBI 0: value=DETERMINED_ON, flags=81, timestamp=1793251798300 (UNSYNCHRONIZED_TIME)
05:29:58.301 [PLG] Updated DBBI 0: value=DETERMINED_OFF, flags=41, timestamp=1793251798300 (UNSYNCHRONIZED_TIME)
05:29:58.301 [PLG] Updated DBBI 0: value=DETERMINED_ON, flags=81, timestamp=1793251798301 (UNSYNCHRONIZED_TIME)
05:29:58.301 [PLG] Updated DBBI 0: value=DETERMINED_OFF, flags=41, timestamp=1793251798301 (UNSYNCHRONIZED_TIME)
05:29:58.301 [PLG] Updated DBBI 0: value=DETERMINED_ON, flags=81, timestamp=1793251798301 (UNSYNCHRONIZED_TIME)
05:29:58.301 [PLG] Updated DBBI 0: value=DETERMINED_OFF, flags=41, timestamp=1793251798301 (UNSYNCHRONIZED_TIME)
05:29:58.301 [PLG] Updated DBBI 0: value=DETERMINED_ON, flags=81, timestamp=1793251798301 (UNSYNCHRONIZED_TIME)
05:29:58.301 [PLG] Updated DBBI 0: value=DETERMINED_OFF, flags=41, timestamp=1793251798301 (UNSYNCHRONIZED_TIME)
05:29:58.301 The plugin reports the DUT's clock unsynchronized
05:29:58.301 step: 5
05:29:58.301 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02
05:29:58.301 - g4v0, 1-Byte Count, count: 1
05:29:58.301 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02
05:29:58.301 g4v0, 1-Byte Count, count: 1
05:29:58.301 --T-> fir: 1 fin: 1 seq: 0
05:29:58.301 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 12 dest: 1024 src: 1
05:29:58.301 --P-> 05 64 0C C4 00 04 01 00 F4 54
05:29:58.301 C0 C2 01 04 00 07 01 70 0C
05:29:58.301 steps: 6 to 10
05:29:58.301 - Read a single fragment response w/ sequence(0x02)
05:29:58.301 - Verify the device responds with the first Double-bit Binary event
05:29:58.301 - If the events carry timestamps, verify that the gaps between them match the gaps between when the events were generated, to the Device Profile's resolution
05:29:58.301 - Verify that an application layer confirmation is requested.
05:29:58.301 - Verify that the response contains events of the variations List(g4v1, g4v2, g4v3), and besides them only CTOs (g51v1 or g51v2, qualifier 0x07)
05:29:58.301 - Verify that the event objects are prefixed with 1-octet (qualifier 0x17) or 2-octet (qualifier 0x28) indexes
05:29:58.301 - Verify that each relative-time event is preceded by a CTO object (Table 8-4)
05:29:58.301 - Verify that the flags behave as the note on flags in Section 2 requires (Note 5 in 2.7, Note 6 in 3.1r1).
05:29:58.301 - Confirm each response that asks for a confirmation
05:29:58.302 <-P-- 05 64 12 44 01 00 00 04 7A 6A
05:29:58.302 C1 E2 81 92 00 04 01 28 01 00 00 00 81 45 60
05:29:58.302 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 18 dest: 1 src: 1024
05:29:58.302 <-T-- fir: 1 fin: 1 seq: 1
05:29:58.302 <-A-- Response(0x81) fir: 1 fin: 1 con: 1 uns: 0 seq: 0x02 IIN(DeviceRestart, NeedTime, Class1Events)
05:29:58.302 g4v1, 2-Byte Count and Index, count: 1
05:29:58.302 [0] - flags: 0x81
05:29:58.302 --A-> Confirm(0x00) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02
05:29:58.302 --T-> fir: 1 fin: 1 seq: 0
05:29:58.302 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 8 dest: 1024 src: 1
05:29:58.302 --P-> 05 64 08 C4 00 04 01 00 9A 19
05:29:58.302 C0 C2 00 D6 8D
05:29:58.303 [PLG] Verified first double-bit binary input point event
05:29:58.303 step: 11
05:29:58.303 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03
05:29:58.303 - g4v0, 1-Byte Count, count: 9
05:29:58.303 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03
05:29:58.303 g4v0, 1-Byte Count, count: 9
05:29:58.303 --T-> fir: 1 fin: 1 seq: 0
05:29:58.303 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 12 dest: 1024 src: 1
05:29:58.303 --P-> 05 64 0C C4 00 04 01 00 F4 54
05:29:58.303 C0 C3 01 04 00 07 09 1E 46
05:29:58.303 steps: 12 to 13
05:29:58.303 - Read a single fragment response w/ sequence(0x03)
05:29:58.303 - Verify that the response holds the Double-bit Binary events generated that weren't reported before
05:29:58.303 - If the events carry timestamps, verify that the gaps between them match the gaps between when the events were generated, to the Device Profile's resolution
05:29:58.303 - Verify that an application layer confirmation is requested.
05:29:58.303 - Verify that the response contains events of the variations List(g4v1, g4v2, g4v3), and besides them only CTOs (g51v1 or g51v2, qualifier 0x07)
05:29:58.303 - Verify that the event objects are prefixed with 1-octet (qualifier 0x17) or 2-octet (qualifier 0x28) indexes
05:29:58.303 - Verify that each relative-time event is preceded by a CTO object (Table 8-4)
05:29:58.303 - Verify that the flags behave as the note on flags in Section 2 requires (Note 5 in 2.7, Note 6 in 3.1r1).
05:29:58.303 - Confirm each response that asks for a confirmation
05:29:58.305 <-P-- 05 64 2A 44 01 00 00 04 E5 79
05:29:58.305 C2 E3 81 90 00 04 01 28 09 00 00 00 41 00 00 81 52 62
05:29:58.305 00 00 41 00 00 81 00 00 41 00 00 81 00 00 41 00 7D B1
05:29:58.305 00 81 00 00 41 CB 54
05:29:58.305 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 42 dest: 1 src: 1024
05:29:58.305 <-T-- fir: 1 fin: 1 seq: 2
05:29:58.305 <-A-- Response(0x81) fir: 1 fin: 1 con: 1 uns: 0 seq: 0x03 IIN(DeviceRestart, NeedTime)
05:29:58.305 g4v1, 2-Byte Count and Index, count: 9
05:29:58.305 [0] - flags: 0x41
05:29:58.305 [0] - flags: 0x81
05:29:58.305 [0] - flags: 0x41
05:29:58.305 [0] - flags: 0x81
05:29:58.305 [0] - flags: 0x41
05:29:58.305 [0] - flags: 0x81
05:29:58.305 [0] - flags: 0x41
05:29:58.305 [0] - flags: 0x81
05:29:58.305 [0] - flags: 0x41
05:29:58.305 --A-> Confirm(0x00) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03
05:29:58.305 --T-> fir: 1 fin: 1 seq: 0
05:29:58.305 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 8 dest: 1024 src: 1
05:29:58.305 --P-> 05 64 08 C4 00 04 01 00 9A 19
05:29:58.305 C0 C3 00 98 26
05:29:58.305 [PLG] Verified 9 double-bit binary input point event(s)
05:29:58.305 Passed procedure: 8.22.2.3