| 05:30:05.697 | Running procedure: 8.22.2.9 | |
| 05:30:05.698 | This procedure is enabled because the following options: | |
| 05:30:05.698 | - supports.doubleBitInput == true | |
| 05:30:05.698 | - supports.doubleBitInputChangeEvents == true | |
| 05:30:05.698 | step: 1 | |
| 05:30:05.698 | - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 | |
| 05:30:05.698 | - g4v0, All Objects | |
| 05:30:05.698 | --A-> | Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 |
| 05:30:05.698 | g4v0, All Objects | |
| 05:30:05.698 | --T-> | fir: 1 fin: 1 seq: 0 |
| 05:30:05.698 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1 |
| 05:30:05.698 | --P-> | 05 64 0B C4 00 04 01 00 CA 8A |
| 05:30:05.698 | C0 C1 01 04 00 06 05 23 | |
| 05:30:05.698 | steps: 2 to 3 | |
| 05:30:05.698 | - Read any number of valid responses beginning w/ sequence(0x01) and incrementing by 1 modulo 16 | |
| 05:30:05.698 | - If the response carries data, verify that it asks for an application layer confirmation. | |
| 05:30:05.698 | - Confirm each response that asks for a confirmation | |
| 05:30:05.699 | <-P-- | 05 64 0A 44 01 00 00 04 67 88 |
| 05:30:05.699 | C0 C1 81 90 00 73 EE | |
| 05:30:05.699 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024 |
| 05:30:05.699 | <-T-- | fir: 1 fin: 1 seq: 0 |
| 05:30:05.699 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 IIN(DeviceRestart, NeedTime) |
| 05:30:05.699 | step: 4 | |
| 05:30:05.699 | - Change double-bit binary inputs several times, one or more of them, to create events | |
| 05:30:05.699 | [PLG] | Updated DBBI 0: value=DETERMINED_ON, flags=81, timestamp=1793251805699 (UNSYNCHRONIZED_TIME) |
| 05:30:05.699 | [PLG] | Updated DBBI 1: value=DETERMINED_ON, flags=81, timestamp=1793251805699 (UNSYNCHRONIZED_TIME) |
| 05:30:05.699 | [PLG] | Updated DBBI 2: value=DETERMINED_ON, flags=81, timestamp=1793251805699 (UNSYNCHRONIZED_TIME) |
| 05:30:05.699 | [PLG] | Updated DBBI 3: value=DETERMINED_ON, flags=81, timestamp=1793251805699 (UNSYNCHRONIZED_TIME) |
| 05:30:05.699 | [PLG] | Updated DBBI 4: value=DETERMINED_ON, flags=81, timestamp=1793251805699 (UNSYNCHRONIZED_TIME) |
| 05:30:05.699 | [PLG] | Updated DBBI 5: value=DETERMINED_ON, flags=81, timestamp=1793251805699 (UNSYNCHRONIZED_TIME) |
| 05:30:05.699 | [PLG] | Updated DBBI 6: value=DETERMINED_ON, flags=81, timestamp=1793251805699 (UNSYNCHRONIZED_TIME) |
| 05:30:05.700 | [PLG] | Updated DBBI 7: value=DETERMINED_ON, flags=81, timestamp=1793251805699 (UNSYNCHRONIZED_TIME) |
| 05:30:05.700 | [PLG] | Updated DBBI 8: value=DETERMINED_ON, flags=81, timestamp=1793251805700 (UNSYNCHRONIZED_TIME) |
| 05:30:05.700 | [PLG] | Updated DBBI 9: value=DETERMINED_ON, flags=81, timestamp=1793251805700 (UNSYNCHRONIZED_TIME) |
| 05:30:05.700 | The plugin reports the DUT's clock unsynchronized | |
| 05:30:05.700 | step: 5 | |
| 05:30:05.700 | - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 | |
| 05:30:05.700 | - g4v2, All Objects | |
| 05:30:05.700 | --A-> | Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 |
| 05:30:05.700 | g4v2, All Objects | |
| 05:30:05.700 | --T-> | fir: 1 fin: 1 seq: 0 |
| 05:30:05.700 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1 |
| 05:30:05.700 | --P-> | 05 64 0B C4 00 04 01 00 CA 8A |
| 05:30:05.700 | C0 C2 01 04 02 06 EA 5D | |
| 05:30:05.700 | step: 6 | |
| 05:30:05.700 | - The DUT supports the requested absolute-time event variation (g4v2). | |
| 05:30:05.700 | steps: 7 to 12 | |
| 05:30:05.700 | - Read a single fragment response w/ sequence(0x02) | |
| 05:30:05.700 | - Verify that the response holds every Double-bit Binary event generated | |
| 05:30:05.700 | - If the events carry timestamps, verify that the gaps between them match the gaps between when the events were generated, to the Device Profile's resolution | |
| 05:30:05.700 | - Verify that an application layer confirmation is requested. | |
| 05:30:05.700 | - Verify that the events are reported as TB2017-003a 5.1.3.1.2 requires, which the DUT implements: g4v2 for events recorded while the clock was synchronized, g4v3 after g51v2 for those recorded while it was unsynchronized, by the clock's state as the plugin reports it | |
| 05:30:05.700 | - Verify that the flags behave as the note on flags in Section 2 requires (Note 5 in 2.7, Note 6 in 3.1r1). | |
| 05:30:05.700 | - Confirm each response that asks for a confirmation | |
| 05:30:05.700 | <-P-- | 05 64 4B 44 01 00 00 04 FD 93 |
| 05:30:05.700 | C1 E2 81 90 00 33 02 07 01 03 0A 23 86 A1 01 04 DC 18 | |
| 05:30:05.700 | 03 28 0A 00 00 00 81 00 00 01 00 81 00 00 02 00 AC 42 | |
| 05:30:05.700 | 81 00 00 03 00 81 00 00 04 00 81 00 00 05 00 81 9B 00 | |
| 05:30:05.700 | 00 00 06 00 81 00 00 07 00 81 00 00 08 00 81 01 F7 CC | |
| 05:30:05.700 | 00 09 00 81 01 00 E1 6E | |
| 05:30:05.700 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 75 dest: 1 src: 1024 |
| 05:30:05.700 | <-T-- | fir: 1 fin: 1 seq: 1 |
| 05:30:05.701 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 1 uns: 0 seq: 0x02 IIN(DeviceRestart, NeedTime) |
| 05:30:05.701 | g51v2, 1-Byte Count, count: 1 | |
| 05:30:05.701 | time: 1793251805699 | |
| 05:30:05.701 | g4v3, 2-Byte Count and Index, count: 10 | |
| 05:30:05.701 | [0] - flags: 0x81 cto: 0 | |
| 05:30:05.701 | [1] - flags: 0x81 cto: 0 | |
| 05:30:05.701 | [2] - flags: 0x81 cto: 0 | |
| 05:30:05.701 | [3] - flags: 0x81 cto: 0 | |
| 05:30:05.701 | [4] - flags: 0x81 cto: 0 | |
| 05:30:05.701 | [5] - flags: 0x81 cto: 0 | |
| 05:30:05.701 | [6] - flags: 0x81 cto: 0 | |
| 05:30:05.701 | [7] - flags: 0x81 cto: 0 | |
| 05:30:05.701 | [8] - flags: 0x81 cto: 1 | |
| 05:30:05.701 | [9] - flags: 0x81 cto: 1 | |
| 05:30:05.701 | --A-> | Confirm(0x00) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 |
| 05:30:05.701 | --T-> | fir: 1 fin: 1 seq: 0 |
| 05:30:05.701 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 8 dest: 1024 src: 1 |
| 05:30:05.701 | --P-> | 05 64 08 C4 00 04 01 00 9A 19 |
| 05:30:05.701 | C0 C2 00 D6 8D | |
| 05:30:05.701 | [PLG] | Verified 10 double-bit binary input point event(s) |
| 05:30:05.701 | Note on the result: The events were checked as TB2017-003a 5.1.3.1.2 requires, which the DUT implements, in place of the steps' g4v2 only | |
| 05:30:05.701 | step: 13 | |
| 05:30:05.701 | - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03 | |
| 05:30:05.701 | - g4v0, All Objects | |
| 05:30:05.701 | --A-> | Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03 |
| 05:30:05.701 | g4v0, All Objects | |
| 05:30:05.701 | --T-> | fir: 1 fin: 1 seq: 0 |
| 05:30:05.701 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1 |
| 05:30:05.702 | --P-> | 05 64 0B C4 00 04 01 00 CA 8A |
| 05:30:05.702 | C0 C3 01 04 00 06 09 65 | |
| 05:30:05.702 | step: 14 | |
| 05:30:05.702 | - Read a single fragment response w/ sequence(0x03) | |
| 05:30:05.702 | - Verify that the response is empty | |
| 05:30:05.702 | - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported) | |
| 05:30:05.702 | <-P-- | 05 64 0A 44 01 00 00 04 67 88 |
| 05:30:05.702 | C2 C3 81 90 00 D6 60 | |
| 05:30:05.702 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024 |
| 05:30:05.702 | <-T-- | fir: 1 fin: 1 seq: 2 |
| 05:30:05.702 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03 IIN(DeviceRestart, NeedTime) |
| 05:30:05.702 | Passed procedure: 8.22.2.9 |