| 05:31:18.331 | Running procedure: 8.23.2.3 | |
| 05:31:18.333 | This procedure is enabled because the following options: | |
| 05:31:18.333 | - supports.deviceAttributes == true | |
| 05:31:18.333 | steps: 1 to 2, g0v241 | |
| 05:31:18.333 | - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 | |
| 05:31:18.333 | - g0v241, 1-Byte Start/Stop, start: 0 stop: 0 | |
| 05:31:18.333 | - Read a single fragment response w/ sequence(0x00) | |
| 05:31:18.333 | - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported) | |
| 05:31:18.333 | - Verify that the response contains only g0v241 for the standard set (index 0), with a valid value | |
| 05:31:18.333 | - Verify that the standard set device attributes are the DUT's current settings | |
| 05:31:18.334 | --A-> | Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 |
| 05:31:18.334 | g0v241, 1-Byte Start/Stop, start: 0 stop: 0 | |
| 05:31:18.334 | --T-> | fir: 1 fin: 1 seq: 0 |
| 05:31:18.334 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 13 dest: 1024 src: 1 |
| 05:31:18.334 | --P-> | 05 64 0D C4 00 04 01 00 13 E1 |
| 05:31:18.334 | C0 C0 01 00 F1 00 00 00 53 9C | |
| 05:31:18.334 | <-P-- | 05 64 13 44 01 00 00 04 9D DF |
| 05:31:18.334 | C0 C0 81 90 00 00 F1 00 00 00 02 02 00 08 12 D1 | |
| 05:31:18.334 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 19 dest: 1 src: 1024 |
| 05:31:18.334 | <-T-- | fir: 1 fin: 1 seq: 0 |
| 05:31:18.334 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 IIN(DeviceRestart, NeedTime) |
| 05:31:18.334 | g0v241, 1-Byte Start/Stop, start: 0 stop: 0 | |
| 05:31:18.334 | [0] - uint: 2048 | |
| 05:31:18.335 | [PLG] | Verified 1 device attribute(s) |
| 05:31:18.335 | steps: 1 to 2, g0v245 | |
| 05:31:18.335 | - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 | |
| 05:31:18.335 | - g0v245, 1-Byte Start/Stop, start: 0 stop: 0 | |
| 05:31:18.335 | - Read a single fragment response w/ sequence(0x01) | |
| 05:31:18.335 | - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported) | |
| 05:31:18.335 | - Verify that the response contains only g0v245 for the standard set (index 0), with a valid value | |
| 05:31:18.335 | - Verify that the standard set device attributes are the DUT's current settings | |
| 05:31:18.335 | --A-> | Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 |
| 05:31:18.335 | g0v245, 1-Byte Start/Stop, start: 0 stop: 0 | |
| 05:31:18.335 | --T-> | fir: 1 fin: 1 seq: 0 |
| 05:31:18.335 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 13 dest: 1024 src: 1 |
| 05:31:18.335 | --P-> | 05 64 0D C4 00 04 01 00 13 E1 |
| 05:31:18.335 | C0 C1 01 00 F5 00 00 00 1A 1F | |
| 05:31:18.335 | <-P-- | 05 64 19 44 01 00 00 04 F6 63 |
| 05:31:18.335 | C1 C1 81 90 00 00 F5 00 00 00 01 08 42 65 6E 64 29 FD | |
| 05:31:18.335 | 2C 20 4F 52 10 FB | |
| 05:31:18.335 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 25 dest: 1 src: 1024 |
| 05:31:18.335 | <-T-- | fir: 1 fin: 1 seq: 1 |
| 05:31:18.335 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 IIN(DeviceRestart, NeedTime) |
| 05:31:18.335 | g0v245, 1-Byte Start/Stop, start: 0 stop: 0 | |
| 05:31:18.335 | [0] - vstr: "Bend, OR" | |
| 05:31:18.336 | [PLG] | Verified 1 device attribute(s) |
| 05:31:18.336 | steps: 1 to 2, g0v247 | |
| 05:31:18.336 | - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 | |
| 05:31:18.336 | - g0v247, 1-Byte Start/Stop, start: 0 stop: 0 | |
| 05:31:18.336 | - Read a single fragment response w/ sequence(0x02) | |
| 05:31:18.336 | - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported) | |
| 05:31:18.336 | - Verify that the response contains only g0v247 for the standard set (index 0), with a valid value | |
| 05:31:18.336 | - Verify that the standard set device attributes are the DUT's current settings | |
| 05:31:18.336 | --A-> | Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 |
| 05:31:18.336 | g0v247, 1-Byte Start/Stop, start: 0 stop: 0 | |
| 05:31:18.336 | --T-> | fir: 1 fin: 1 seq: 0 |
| 05:31:18.336 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 13 dest: 1024 src: 1 |
| 05:31:18.336 | --P-> | 05 64 0D C4 00 04 01 00 13 E1 |
| 05:31:18.336 | C0 C2 01 00 F7 00 00 00 15 36 | |
| 05:31:18.336 | <-P-- | 05 64 14 44 01 00 00 04 A3 01 |
| 05:31:18.336 | C2 C2 81 90 00 00 F7 00 00 00 01 03 44 55 54 A4 3C | |
| 05:31:18.336 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 20 dest: 1 src: 1024 |
| 05:31:18.336 | <-T-- | fir: 1 fin: 1 seq: 2 |
| 05:31:18.336 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 IIN(DeviceRestart, NeedTime) |
| 05:31:18.336 | g0v247, 1-Byte Start/Stop, start: 0 stop: 0 | |
| 05:31:18.336 | [0] - vstr: "DUT" | |
| 05:31:18.336 | [PLG] | Verified 1 device attribute(s) |
| 05:31:18.336 | steps: 1 to 2, g0v250 | |
| 05:31:18.336 | - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03 | |
| 05:31:18.336 | - g0v250, 1-Byte Start/Stop, start: 0 stop: 0 | |
| 05:31:18.336 | - Read a single fragment response w/ sequence(0x03) | |
| 05:31:18.336 | - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported) | |
| 05:31:18.336 | - Verify that the response contains only g0v250 for the standard set (index 0), with a valid value | |
| 05:31:18.336 | - Verify that the standard set device attributes are the DUT's current settings | |
| 05:31:18.336 | --A-> | Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03 |
| 05:31:18.336 | g0v250, 1-Byte Start/Stop, start: 0 stop: 0 | |
| 05:31:18.336 | --T-> | fir: 1 fin: 1 seq: 0 |
| 05:31:18.336 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 13 dest: 1024 src: 1 |
| 05:31:18.336 | --P-> | 05 64 0D C4 00 04 01 00 13 E1 |
| 05:31:18.336 | C0 C3 01 00 FA 00 00 00 9B 82 | |
| 05:31:18.337 | <-P-- | 05 64 2C 44 01 00 00 04 3C 12 |
| 05:31:18.337 | C3 C3 81 90 00 00 FA 00 00 00 01 1B 64 6E 70 33 BB 50 | |
| 05:31:18.337 | 20 63 6F 6E 66 6F 72 6D 61 6E 63 65 20 6F 75 74 D0 8D | |
| 05:31:18.337 | 73 74 61 74 69 6F 6E C4 E8 | |
| 05:31:18.337 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 44 dest: 1 src: 1024 |
| 05:31:18.337 | <-T-- | fir: 1 fin: 1 seq: 3 |
| 05:31:18.337 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03 IIN(DeviceRestart, NeedTime) |
| 05:31:18.337 | g0v250, 1-Byte Start/Stop, start: 0 stop: 0 | |
| 05:31:18.337 | [0] - vstr: "dnp3 conformance outstation" | |
| 05:31:18.337 | [PLG] | Verified 1 device attribute(s) |
| 05:31:18.337 | steps: 1 to 2, g0v252 | |
| 05:31:18.337 | - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x04 | |
| 05:31:18.337 | - g0v252, 1-Byte Start/Stop, start: 0 stop: 0 | |
| 05:31:18.337 | - Read a single fragment response w/ sequence(0x04) | |
| 05:31:18.337 | - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported) | |
| 05:31:18.337 | - Verify that the response contains only g0v252 for the standard set (index 0), with a valid value | |
| 05:31:18.337 | - Verify that the standard set device attributes are the DUT's current settings | |
| 05:31:18.337 | --A-> | Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x04 |
| 05:31:18.337 | g0v252, 1-Byte Start/Stop, start: 0 stop: 0 | |
| 05:31:18.337 | --T-> | fir: 1 fin: 1 seq: 0 |
| 05:31:18.337 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 13 dest: 1024 src: 1 |
| 05:31:18.337 | --P-> | 05 64 0D C4 00 04 01 00 13 E1 |
| 05:31:18.337 | C0 C4 01 00 FC 00 00 00 4E 47 | |
| 05:31:18.338 | <-P-- | 05 64 22 44 01 00 00 04 39 E3 |
| 05:31:18.338 | C4 C4 81 90 00 00 FC 00 00 00 01 11 53 74 65 70 8F A8 | |
| 05:31:18.338 | 20 46 75 6E 63 74 69 6F 6E 20 49 2F 4F 15 C9 | |
| 05:31:18.338 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 34 dest: 1 src: 1024 |
| 05:31:18.338 | <-T-- | fir: 1 fin: 1 seq: 4 |
| 05:31:18.338 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x04 IIN(DeviceRestart, NeedTime) |
| 05:31:18.338 | g0v252, 1-Byte Start/Stop, start: 0 stop: 0 | |
| 05:31:18.338 | [0] - vstr: "Step Function I/O" | |
| 05:31:18.338 | [PLG] | Verified 1 device attribute(s) |
| 05:31:18.338 | Passed procedure: 8.23.2.3 |