| 05:25:07.487 | Running procedure: 8.4.1.2.12 | |
| 05:25:07.488 | This procedure is enabled because the following options: | |
| 05:25:07.488 | - supports.analogOutput.commands == true | |
| 05:25:07.488 | step: 2 | |
| 05:25:07.488 | - Tell a manual tester: Watch analog output 0 during this procedure: it should not operate at all, after the OPERATE in step 4 or the one in step 7. You'll be asked what you saw after the steps, so make sure you can tell one operation from two (e.g. a counter, or an on-time long enough to see). Get ready, then press ENTER. | |
| 05:25:07.488 | - Select(0x03) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 | |
| 05:25:07.488 | - g41v2, 1-Byte Count and Index, count: 1 | |
| 05:25:07.488 | - [0] - value: 10 status: 0 (SUCCESS) | |
| 05:25:07.489 | --A-> | Select(0x03) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 |
| 05:25:07.489 | g41v2, 1-Byte Count and Index, count: 1 | |
| 05:25:07.489 | [0] - value: 10 status: 0 (SUCCESS) | |
| 05:25:07.489 | --T-> | fir: 1 fin: 1 seq: 0 |
| 05:25:07.489 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 16 dest: 1024 src: 1 |
| 05:25:07.489 | --P-> | 05 64 10 C4 00 04 01 00 87 FB |
| 05:25:07.489 | C0 C0 03 29 02 17 01 00 0A 00 00 9F B0 | |
| 05:25:07.489 | step: 3 | |
| 05:25:07.489 | - Read a single fragment response w/ sequence(0x00) | |
| 05:25:07.489 | - Verify the response contains the exact object header: | |
| 05:25:07.489 | - g41v2, 1-Byte Count and Index, count: 1 | |
| 05:25:07.489 | - [0] - value: 10 status: 0 (SUCCESS) | |
| 05:25:07.489 | - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported) | |
| 05:25:07.490 | <-P-- | 05 64 12 44 01 00 00 04 7A 6A |
| 05:25:07.490 | C0 C0 81 90 00 29 02 17 01 00 0A 00 00 6A 73 | |
| 05:25:07.490 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 18 dest: 1 src: 1024 |
| 05:25:07.490 | <-T-- | fir: 1 fin: 1 seq: 0 |
| 05:25:07.490 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 IIN(DeviceRestart, NeedTime) |
| 05:25:07.490 | g41v2, 1-Byte Count and Index, count: 1 | |
| 05:25:07.490 | [0] - value: 10 status: 0 (SUCCESS) | |
| 05:25:07.490 | step: 4 | |
| 05:25:07.490 | - Operate(0x04) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 | |
| 05:25:07.490 | - g41v2, 1-Byte Count and Index, count: 1 | |
| 05:25:07.490 | - [0] - value: 10 status: 0 (SUCCESS) | |
| 05:25:07.490 | --A-> | Operate(0x04) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 |
| 05:25:07.490 | g41v2, 1-Byte Count and Index, count: 1 | |
| 05:25:07.490 | [0] - value: 10 status: 0 (SUCCESS) | |
| 05:25:07.491 | --T-> | fir: 1 fin: 1 seq: 0 |
| 05:25:07.491 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 16 dest: 1024 src: 1 |
| 05:25:07.491 | --P-> | 05 64 10 C4 00 04 01 00 87 FB |
| 05:25:07.491 | C0 C2 04 29 02 17 01 00 0A 00 00 97 F9 | |
| 05:25:07.491 | step: 5 | |
| 05:25:07.491 | - Read a single fragment response w/ sequence(0x02) | |
| 05:25:07.491 | - Verify the response contains the exact object header: | |
| 05:25:07.491 | - g41v2, 1-Byte Count and Index, count: 1 | |
| 05:25:07.491 | - [0] - value: 10 status: 2 (NO_SELECT) | |
| 05:25:07.491 | <-P-- | 05 64 12 44 01 00 00 04 7A 6A |
| 05:25:07.491 | C1 C2 81 90 00 29 02 17 01 00 0A 00 02 5A D4 | |
| 05:25:07.491 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 18 dest: 1 src: 1024 |
| 05:25:07.491 | <-T-- | fir: 1 fin: 1 seq: 1 |
| 05:25:07.491 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 IIN(DeviceRestart, NeedTime) |
| 05:25:07.491 | g41v2, 1-Byte Count and Index, count: 1 | |
| 05:25:07.491 | [0] - value: 10 status: 2 (NO_SELECT) | |
| 05:25:07.491 | step: 6 | |
| 05:25:07.491 | - Check that no analog control point operated | |
| 05:25:08.492 | [PLG] | Analog output did NOT operate |
| 05:25:08.493 | step: 7 | |
| 05:25:08.493 | - Operate(0x04) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 | |
| 05:25:08.493 | - g41v2, 1-Byte Count and Index, count: 1 | |
| 05:25:08.493 | - [0] - value: 10 status: 0 (SUCCESS) | |
| 05:25:08.493 | --A-> | Operate(0x04) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 |
| 05:25:08.493 | g41v2, 1-Byte Count and Index, count: 1 | |
| 05:25:08.493 | [0] - value: 10 status: 0 (SUCCESS) | |
| 05:25:08.493 | --T-> | fir: 1 fin: 1 seq: 0 |
| 05:25:08.493 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 16 dest: 1024 src: 1 |
| 05:25:08.493 | --P-> | 05 64 10 C4 00 04 01 00 87 FB |
| 05:25:08.493 | C0 C1 04 29 02 17 01 00 0A 00 00 48 F1 | |
| 05:25:08.494 | step: 8 | |
| 05:25:08.494 | - Read a single fragment response w/ sequence(0x01) | |
| 05:25:08.494 | - Verify the response contains the exact object header: | |
| 05:25:08.494 | - g41v2, 1-Byte Count and Index, count: 1 | |
| 05:25:08.494 | - [0] - value: 10 status: 2 (NO_SELECT) | |
| 05:25:08.494 | <-P-- | 05 64 12 44 01 00 00 04 7A 6A |
| 05:25:08.494 | C2 C1 81 90 00 29 02 17 01 00 0A 00 02 47 4D | |
| 05:25:08.494 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 18 dest: 1 src: 1024 |
| 05:25:08.494 | <-T-- | fir: 1 fin: 1 seq: 2 |
| 05:25:08.494 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 IIN(DeviceRestart, NeedTime) |
| 05:25:08.494 | g41v2, 1-Byte Count and Index, count: 1 | |
| 05:25:08.494 | [0] - value: 10 status: 2 (NO_SELECT) | |
| 05:25:08.494 | step: 9 | |
| 05:25:08.494 | - Check that no analog control point operated | |
| 05:25:09.496 | [PLG] | Analog output did NOT operate |
| 05:25:09.496 | Passed procedure: 8.4.1.2.12 |