8.6.4.2 Test Procedure for Devices with Global Remote Supervisory Control (revision 2.7, subset level 2)

Device under test: Step Function I/O dnp3 outstation

05:25:43.864 Running procedure: 8.6.4.2
05:25:43.870 This procedure is enabled because the following options:
05:25:43.870 - supports.globalRemoteSupervisoryControl == true
05:25:43.870 - supports.binaryOutput.status == true
05:25:43.870 - supports.binaryOutput.commands == true
05:25:43.870 step: 1.a
05:25:43.870 - Set the DUT's remote supervisory control to 'Enabled' or 'Remote', globally and for every point
05:25:43.872 [PLG] Every binary output is under remote control
05:25:43.872 step: 1.b
05:25:43.872 - Binary output 0, the one the controls go to, must be online and have no exception flags
05:25:43.872 step: 1.c
05:25:43.872 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
05:25:43.872 - g10v0, All Objects
05:25:43.873 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
05:25:43.873 g10v0, All Objects
05:25:43.873 --T-> fir: 1 fin: 1 seq: 0
05:25:43.873 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
05:25:43.873 --P-> 05 64 0B C4 00 04 01 00 CA 8A
05:25:43.873 C0 C0 01 0A 00 06 53 98
05:25:43.873 steps: 1.d to 1.e
05:25:43.873 - Read any number of valid responses beginning w/ sequence(0x00) and incrementing by 1 modulo 16
05:25:43.873 - Verify that the response contains objects
05:25:43.873 - Verify that the device responds with only variations: Set(g10v1, g10v2)
05:25:43.873 - Verify that the objects are in start/stop ranges with 1-octet (qualifier 0x00) or 2-octet (qualifier 0x01) indexes
05:25:43.873 - Verify that the IIN field does not contain bits IIN(LocalControl)
05:25:43.873 - Verify that each fragment followed by another, or carrying events, asks for an application layer confirmation.
05:25:43.873 - Note each binary output's flags, to compare the later reads with
05:25:43.873 - Verify that binary output(s) 0 are online, with no exception flags
05:25:43.873 - Confirm each response that asks for a confirmation
05:25:43.874 <-P-- 05 64 25 44 01 00 00 04 07 3D
05:25:43.874 C0 C0 81 90 00 0A 02 01 00 00 13 00 01 01 01 01 3A 43
05:25:43.874 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 BB C3
05:25:43.874 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 37 dest: 1 src: 1024
05:25:43.874 <-T-- fir: 1 fin: 1 seq: 0
05:25:43.874 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 IIN(DeviceRestart, NeedTime)
05:25:43.874 g10v2, 2-Byte Start/Stop, start: 0 stop: 19
05:25:43.874 [0] - flags: 0x01
05:25:43.874 [1] - flags: 0x01
05:25:43.874 [2] - flags: 0x01
05:25:43.874 [3] - flags: 0x01
05:25:43.874 [4] - flags: 0x01
05:25:43.874 [5] - flags: 0x01
05:25:43.874 [6] - flags: 0x01
05:25:43.874 [7] - flags: 0x01
05:25:43.874 [8] - flags: 0x01
05:25:43.874 [9] - flags: 0x01
05:25:43.874 [10] - flags: 0x01
05:25:43.874 [11] - flags: 0x01
05:25:43.874 [12] - flags: 0x01
05:25:43.874 [13] - flags: 0x01
05:25:43.874 [14] - flags: 0x01
05:25:43.874 [15] - flags: 0x01
05:25:43.874 [16] - flags: 0x01
05:25:43.874 [17] - flags: 0x01
05:25:43.874 [18] - flags: 0x01
05:25:43.874 [19] - flags: 0x01
05:25:43.878 step: 1.f
05:25:43.878 - Set the DUT's global remote supervisory switch to 'Disabled' or 'Local'
05:25:43.879 [PLG] Global remote supervisory control was enabled
05:25:43.879 step: 1.g
05:25:43.879 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
05:25:43.879 - g10v0, All Objects
05:25:43.879 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
05:25:43.879 g10v0, All Objects
05:25:43.879 --T-> fir: 1 fin: 1 seq: 0
05:25:43.879 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
05:25:43.879 --P-> 05 64 0B C4 00 04 01 00 CA 8A
05:25:43.879 C0 C1 01 0A 00 06 55 BB
05:25:43.879 steps: 1.h to 1.i
05:25:43.879 - Read any number of valid responses beginning w/ sequence(0x01) and incrementing by 1 modulo 16
05:25:43.879 - Verify that the response contains objects
05:25:43.879 - Verify that the device responds with only variations: Set(g10v1, g10v2)
05:25:43.879 - Verify that the objects are in start/stop ranges with 1-octet (qualifier 0x00) or 2-octet (qualifier 0x01) indexes
05:25:43.879 - Verify that the IIN field contains IIN(LocalControl)
05:25:43.879 - Verify that each fragment followed by another, or carrying events, asks for an application layer confirmation.
05:25:43.879 - Verify that each binary output cleared ONLINE, that every binary output kept the state and other flags it had in the first read
05:25:43.879 - Confirm each response that asks for a confirmation
05:25:43.880 <-P-- 05 64 25 44 01 00 00 04 07 3D
05:25:43.880 C1 C1 81 B0 00 0A 02 01 00 00 13 00 00 00 00 00 3F E7
05:25:43.880 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 FF FF
05:25:43.880 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 37 dest: 1 src: 1024
05:25:43.880 <-T-- fir: 1 fin: 1 seq: 1
05:25:43.880 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 IIN(DeviceRestart, LocalControl, NeedTime)
05:25:43.880 g10v2, 2-Byte Start/Stop, start: 0 stop: 19
05:25:43.880 [0] - flags: 0x00
05:25:43.880 [1] - flags: 0x00
05:25:43.880 [2] - flags: 0x00
05:25:43.880 [3] - flags: 0x00
05:25:43.880 [4] - flags: 0x00
05:25:43.880 [5] - flags: 0x00
05:25:43.880 [6] - flags: 0x00
05:25:43.880 [7] - flags: 0x00
05:25:43.880 [8] - flags: 0x00
05:25:43.880 [9] - flags: 0x00
05:25:43.880 [10] - flags: 0x00
05:25:43.880 [11] - flags: 0x00
05:25:43.880 [12] - flags: 0x00
05:25:43.880 [13] - flags: 0x00
05:25:43.880 [14] - flags: 0x00
05:25:43.880 [15] - flags: 0x00
05:25:43.880 [16] - flags: 0x00
05:25:43.880 [17] - flags: 0x00
05:25:43.880 [18] - flags: 0x00
05:25:43.880 [19] - flags: 0x00
05:25:43.881 step: 1.j
05:25:43.881 - Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02
05:25:43.881 - g12v1, 1-Byte Count and Index, count: 1
05:25:43.881 - [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
05:25:43.881 --A-> Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02
05:25:43.881 g12v1, 1-Byte Count and Index, count: 1
05:25:43.881 [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
05:25:43.881 --T-> fir: 1 fin: 1 seq: 0
05:25:43.881 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 24 dest: 1024 src: 1
05:25:43.882 --P-> 05 64 18 C4 00 04 01 00 5B 61
05:25:43.882 C0 C2 05 0C 01 17 01 00 03 01 64 00 00 00 C8 00 ED 4B
05:25:43.882 00 00 00 FF FF
05:25:43.882 step: 1.k
05:25:43.882 - Read a single fragment response w/ sequence(0x02)
05:25:43.882 - Verify the response contains the exact object header:
05:25:43.882 - g12v1, 1-Byte Count and Index, count: 1
05:25:43.882 - [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 7 (LOCAL)
05:25:43.882 - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported)
05:25:43.882 - Verify that the IIN field contains IIN(LocalControl)
05:25:43.882 <-P-- 05 64 1A 44 01 00 00 04 A6 F0
05:25:43.882 C2 C2 81 B0 00 0C 01 17 01 00 03 01 64 00 00 00 65 1C
05:25:43.882 C8 00 00 00 07 E2 78
05:25:43.882 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 26 dest: 1 src: 1024
05:25:43.882 <-T-- fir: 1 fin: 1 seq: 2
05:25:43.883 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 IIN(DeviceRestart, LocalControl, NeedTime)
05:25:43.883 g12v1, 1-Byte Count and Index, count: 1
05:25:43.883 [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 7 (LOCAL)
05:25:43.883 step: 1.l
05:25:43.883 - Check that no binary control point operated
05:25:44.884 [PLG] Binary output did NOT operate
05:25:44.884 step: 1.m
05:25:44.884 - Set the DUT's remote supervisory control to 'Enabled' or 'Remote', globally and for every point
05:25:44.884 [PLG] Every binary output is under remote control
05:25:44.885 step: 1.n
05:25:44.885 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03
05:25:44.885 - g10v0, All Objects
05:25:44.885 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03
05:25:44.885 g10v0, All Objects
05:25:44.885 --T-> fir: 1 fin: 1 seq: 0
05:25:44.885 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
05:25:44.885 --P-> 05 64 0B C4 00 04 01 00 CA 8A
05:25:44.885 C0 C3 01 0A 00 06 59 FD
05:25:44.885 step: 1.o
05:25:44.885 - Read any number of valid responses beginning w/ sequence(0x03) and incrementing by 1 modulo 16
05:25:44.885 - Verify that the response contains objects
05:25:44.885 - Verify that the device responds with only variations: Set(g10v1, g10v2)
05:25:44.885 - Verify that the objects are in start/stop ranges with 1-octet (qualifier 0x00) or 2-octet (qualifier 0x01) indexes
05:25:44.885 - Verify that the IIN field does not contain bits IIN(LocalControl)
05:25:44.885 - Verify that each fragment followed by another, or carrying events, asks for an application layer confirmation.
05:25:44.885 - Verify that every binary output has the flags it had in the first read
05:25:44.885 - Confirm each response that asks for a confirmation
05:25:44.886 <-P-- 05 64 25 44 01 00 00 04 07 3D
05:25:44.886 C3 C3 81 90 00 0A 02 01 00 00 13 00 01 01 01 01 86 27
05:25:44.886 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 BB C3
05:25:44.886 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 37 dest: 1 src: 1024
05:25:44.886 <-T-- fir: 1 fin: 1 seq: 3
05:25:44.886 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03 IIN(DeviceRestart, NeedTime)
05:25:44.886 g10v2, 2-Byte Start/Stop, start: 0 stop: 19
05:25:44.886 [0] - flags: 0x01
05:25:44.886 [1] - flags: 0x01
05:25:44.886 [2] - flags: 0x01
05:25:44.886 [3] - flags: 0x01
05:25:44.886 [4] - flags: 0x01
05:25:44.886 [5] - flags: 0x01
05:25:44.886 [6] - flags: 0x01
05:25:44.886 [7] - flags: 0x01
05:25:44.886 [8] - flags: 0x01
05:25:44.886 [9] - flags: 0x01
05:25:44.886 [10] - flags: 0x01
05:25:44.886 [11] - flags: 0x01
05:25:44.886 [12] - flags: 0x01
05:25:44.886 [13] - flags: 0x01
05:25:44.886 [14] - flags: 0x01
05:25:44.886 [15] - flags: 0x01
05:25:44.886 [16] - flags: 0x01
05:25:44.886 [17] - flags: 0x01
05:25:44.886 [18] - flags: 0x01
05:25:44.886 [19] - flags: 0x01
05:25:44.888 step: 1.p
05:25:44.888 - Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x04
05:25:44.888 - g12v1, 1-Byte Count and Index, count: 1
05:25:44.888 - [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
05:25:44.888 --A-> Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x04
05:25:44.888 g12v1, 1-Byte Count and Index, count: 1
05:25:44.888 [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
05:25:44.888 --T-> fir: 1 fin: 1 seq: 0
05:25:44.888 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 24 dest: 1024 src: 1
05:25:44.888 --P-> 05 64 18 C4 00 04 01 00 5B 61
05:25:44.888 C0 C4 05 0C 01 17 01 00 03 01 64 00 00 00 C8 00 C4 62
05:25:44.888 00 00 00 FF FF
05:25:44.888 step: 1.q
05:25:44.889 - Read a single fragment response w/ sequence(0x04)
05:25:44.889 - Verify the response contains the exact object header:
05:25:44.889 - g12v1, 1-Byte Count and Index, count: 1
05:25:44.889 - [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
05:25:44.889 - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported)
05:25:44.889 - Verify that the IIN field does not contain bits IIN(LocalControl)
05:25:44.889 <-P-- 05 64 1A 44 01 00 00 04 A6 F0
05:25:44.889 C4 C4 81 90 00 0C 01 17 01 00 03 01 64 00 00 00 CC 14
05:25:44.889 C8 00 00 00 00 78 FB
05:25:44.889 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 26 dest: 1 src: 1024
05:25:44.889 <-T-- fir: 1 fin: 1 seq: 4
05:25:44.889 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x04 IIN(DeviceRestart, NeedTime)
05:25:44.889 g12v1, 1-Byte Count and Index, count: 1
05:25:44.889 [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
05:25:44.889 step: 1.r
05:25:44.889 - Check that binary control point 0 operate
05:25:44.889 [PLG] Binary output 0 did operate
05:25:44.889 Passed procedure: 8.6.4.2