05:25:48.584		Running procedure: 8.6.5.3
05:25:48.586		This procedure is enabled because the following options:
05:25:48.586		- supports.binaryOutput.commands == true or supports.analogOutput.commands == true
05:25:48.586		step: 1
05:25:48.586		- Tell a manual tester: Watch binary output 0: it should operate once after the broadcast in step 1. You'll be asked what you saw after the steps. Get ready, then press ENTER.
05:25:48.586		- Direct Operate No Ack(0x06) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 using link options: { destination == 0xFFFF }
05:25:48.586		- g12v1, 1-Byte Count and Index, count: 1
05:25:48.586		- [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
05:25:48.587	--A->	Direct Operate No Ack(0x06) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
05:25:48.587		g12v1, 1-Byte Count and Index, count: 1
05:25:48.587		[0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
05:25:48.587	--T->	fir: 1 fin: 1 seq: 0
05:25:48.587	--L->	master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 24 dest: 65535 src: 1
05:25:48.587	--P->	05 64 18 C4 FF FF 01 00 0E E4
05:25:48.587		C0 C0 06 0C 01 17 01 00 03 01 64 00 00 00 C8 00 CD D4
05:25:48.587		00 00 00 FF FF
05:25:48.587		step: 2
05:25:48.587		- Check that binary control point 0 operate
05:25:48.687	[PLG]	Binary output 0 did operate
05:25:48.687		steps: 3 to 4
05:25:48.687		- Verify that no link layer frames are received within 2000 ms
05:25:50.689		frame receive timeout
05:25:50.689		step: 5
05:25:50.689		- Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02
05:25:50.689		- g60v2, All Objects
05:25:50.689	--A->	Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02
05:25:50.689		g60v2, All Objects
05:25:50.689	--T->	fir: 1 fin: 1 seq: 0
05:25:50.689	--L->	master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
05:25:50.689	--P->	05 64 0B C4 00 04 01 00 CA 8A
05:25:50.689		C0 C2 01 3C 02 06 58 A6
05:25:50.690		steps: 6 to 7
05:25:50.690		- Read any number of valid responses beginning w/ sequence(0x02) and incrementing by 1 modulo 16
05:25:50.690		- Verify that each fragment followed by another, or carrying events, asks for an application layer confirmation.
05:25:50.690		- Verify that the IIN field contains IIN(Broadcast)
05:25:50.690		- Confirm each response that asks for a confirmation
05:25:50.690	<-P--	05 64 0A 44 01 00 00 04 67 88
05:25:50.690		C0 C2 81 91 00 7C 4F
05:25:50.690	<-L--	master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024
05:25:50.690	<-T--	fir: 1 fin: 1 seq: 0
05:25:50.690	<-A--	Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 IIN(DeviceRestart, NeedTime, Broadcast)
05:25:50.690		step: 8
05:25:50.690		- Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03
05:25:50.690		- g60v2, All Objects
05:25:50.690	--A->	Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03
05:25:50.690		g60v2, All Objects
05:25:50.690	--T->	fir: 1 fin: 1 seq: 0
05:25:50.690	--L->	master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
05:25:50.690	--P->	05 64 0B C4 00 04 01 00 CA 8A
05:25:50.690		C0 C3 01 3C 02 06 5E 85
05:25:50.691		step: 9
05:25:50.691		- Read a single fragment response w/ sequence(0x03)
05:25:50.691		- Verify that the response is empty
05:25:50.691		- Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported)
05:25:50.691		- Verify that the IIN field does not contain bits IIN(Broadcast)
05:25:50.691	<-P--	05 64 0A 44 01 00 00 04 67 88
05:25:50.691		C1 C3 81 90 00 DC 05
05:25:50.691	<-L--	master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024
05:25:50.691	<-T--	fir: 1 fin: 1 seq: 1
05:25:50.691	<-A--	Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03 IIN(DeviceRestart, NeedTime)
05:25:50.691		Passed procedure: 8.6.5.3