05:28:04.605		Running procedure: 8.13.2d
05:28:04.606		This procedure is enabled because the following options:
05:28:04.606		- supports.binaryInput == true
05:28:04.606		- supports.disable.binaryInput == true
05:28:04.606		- supports.binaryInputReads == true
05:28:04.606		step: 1
05:28:04.606		- The DUT's binary inputs can be uninstalled or disabled through its configuration
05:28:04.606		step: 2
05:28:04.606		- Uninstall or disable every binary input point on the DUT
05:28:04.606	[PLG]	All binary input points were uninstalled
05:28:04.606	[PLG]	Cycling power
05:28:04.608		step: 3
05:28:04.608		- Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
05:28:04.608		- g1v0, All Objects
05:28:04.608	--A->	Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
05:28:04.608		g1v0, All Objects
05:28:04.608	--T->	fir: 1 fin: 1 seq: 0
05:28:04.608	--L->	master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
05:28:04.608	--P->	05 64 0B C4 00 04 01 00 CA 8A
05:28:04.608		C0 C1 01 01 00 06 5D 5C
05:28:04.609		step: 4
05:28:04.609		- Read a single fragment response w/ sequence(0x01)
05:28:04.609		- Verify that the response is empty
05:28:04.609		- Verify that the IIN field contains at least one of IIN(ParamError, ObjectUnknown)
05:28:04.609		- Verify that the IIN field does not contain bits IIN(FuncNotSupported)
05:28:04.609	<-P--	05 64 0A 44 01 00 00 04 67 88
05:28:04.609		C0 C1 81 90 02 CF 82
05:28:04.609	<-L--	master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024
05:28:04.609	<-T--	fir: 1 fin: 1 seq: 0
05:28:04.609	<-A--	Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 IIN(DeviceRestart, NeedTime, ObjectUnknown)
05:28:04.609		Passed procedure: 8.13.2d
05:28:04.609		restore
05:28:04.609		- Reinstall or re-enable the points that were uninstalled or disabled, so later procedures can use them
05:28:04.609	[PLG]	All points were reinstalled
05:28:04.609	[PLG]	Cycling power