8.14.2m Binary Input Change with Relative Time, Qualifier 0x06 (revision 3.1r1, subset level 3)

Device under test: Step Function I/O dnp3 outstation

All results
05:28:19.160 Running procedure: 8.14.2m
05:28:19.165 This procedure is enabled because the following options:
05:28:19.165 - supports.binaryInput == true
05:28:19.165 - supports.binaryInputChangeEvents == true
05:28:19.165 - supports.binaryInputEventReads == true
05:28:19.165 step: 1
05:28:19.165 - Cycle power to the DUT
05:28:19.165 [PLG] Cycling power
05:28:19.166 step: 2
05:28:19.166 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
05:28:19.166 - g2v0, All Objects
05:28:19.167 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
05:28:19.167 g2v0, All Objects
05:28:19.167 --T-> fir: 1 fin: 1 seq: 0
05:28:19.167 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
05:28:19.167 --P-> 05 64 0B C4 00 04 01 00 CA 8A
05:28:19.167 C0 C0 01 02 00 06 93 55
05:28:19.167 steps: 3 to 4
05:28:19.167 - Read any number of valid responses beginning w/ sequence(0x00) and incrementing by 1 modulo 16
05:28:19.167 - If the response carries data, verify that it asks for an application layer confirmation.
05:28:19.167 - Note whether IIN1.4 (NEED_TIME) is set
05:28:19.167 - Confirm each response that asks for a confirmation
05:28:19.168 <-P-- 05 64 0A 44 01 00 00 04 67 88
05:28:19.168 C0 C0 81 90 00 9B 2C
05:28:19.168 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024
05:28:19.168 <-T-- fir: 1 fin: 1 seq: 0
05:28:19.168 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 IIN(DeviceRestart, NeedTime)
05:28:19.168 step: 5
05:28:19.168 - If IIN1.4 wasn't set in step 3's response, skip to step 19
05:28:19.168 step: 6
05:28:19.168 - Change binary inputs several times, one or more of them, to create events
05:28:19.168 - (Only if IIN1.4 was set in step 3's response)
05:28:19.169 [PLG] Updated BI 0: value=true, flags=81, timestamp=1793251699168 (UNSYNCHRONIZED_TIME)
05:28:19.169 [PLG] Updated BI 1: value=true, flags=81, timestamp=1793251699169 (UNSYNCHRONIZED_TIME)
05:28:19.169 [PLG] Updated BI 2: value=true, flags=81, timestamp=1793251699169 (UNSYNCHRONIZED_TIME)
05:28:19.169 [PLG] Updated BI 3: value=true, flags=81, timestamp=1793251699169 (UNSYNCHRONIZED_TIME)
05:28:19.169 [PLG] Updated BI 4: value=true, flags=81, timestamp=1793251699169 (UNSYNCHRONIZED_TIME)
05:28:19.169 [PLG] Updated BI 5: value=true, flags=81, timestamp=1793251699169 (UNSYNCHRONIZED_TIME)
05:28:19.169 [PLG] Updated BI 6: value=true, flags=81, timestamp=1793251699169 (UNSYNCHRONIZED_TIME)
05:28:19.169 [PLG] Updated BI 7: value=true, flags=81, timestamp=1793251699169 (UNSYNCHRONIZED_TIME)
05:28:19.169 [PLG] Updated BI 8: value=true, flags=81, timestamp=1793251699169 (UNSYNCHRONIZED_TIME)
05:28:19.169 [PLG] Updated BI 9: value=true, flags=81, timestamp=1793251699169 (UNSYNCHRONIZED_TIME)
05:28:19.169 The plugin reports the DUT's clock unsynchronized
05:28:19.170 step: 7
05:28:19.170 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
05:28:19.170 - g2v3, All Objects
05:28:19.170 - (Only if IIN1.4 was set in step 3's response)
05:28:19.170 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
05:28:19.170 g2v3, All Objects
05:28:19.170 --T-> fir: 1 fin: 1 seq: 0
05:28:19.170 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
05:28:19.170 --P-> 05 64 0B C4 00 04 01 00 CA 8A
05:28:19.170 C0 C1 01 02 03 06 3E C6
05:28:19.170 steps: 8 to 14
05:28:19.170 - Read a single fragment response w/ sequence(0x01)
05:28:19.170 - Verify that the response holds every Binary Input event generated
05:28:19.170 - If the events carry timestamps, verify that the gaps between them match the gaps between when the events were generated, to the Device Profile's resolution
05:28:19.170 - Verify that an application layer confirmation is requested.
05:28:19.170 - Verify that the events are reported as 3.1r1's rules for event reporting require, for a read of g2v3, by the state of the DUT's clock when it recorded them, where the procedure or the plugin knows it
05:28:19.170 - Verify that the flags behave as the note on flags in Section 2 requires (Note 5 in 2.7, Note 6 in 3.1r1).
05:28:19.170 - Confirm each response that asks for a confirmation
05:28:19.170 - (Only if IIN1.4 was set in step 3's response)
05:28:19.170 <-P-- 05 64 4B 44 01 00 00 04 FD 93
05:28:19.170 C1 E1 81 90 00 33 02 07 01 E0 69 21 86 A1 01 02 10 9A
05:28:19.170 03 28 0A 00 00 00 81 00 00 01 00 81 01 00 02 00 44 80
05:28:19.170 81 01 00 03 00 81 01 00 04 00 81 01 00 05 00 81 E7 8E
05:28:19.170 01 00 06 00 81 01 00 07 00 81 01 00 08 00 81 01 12 22
05:28:19.170 00 09 00 81 01 00 E1 6E
05:28:19.170 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 75 dest: 1 src: 1024
05:28:19.170 <-T-- fir: 1 fin: 1 seq: 1
05:28:19.170 <-A-- Response(0x81) fir: 1 fin: 1 con: 1 uns: 0 seq: 0x01 IIN(DeviceRestart, NeedTime)
05:28:19.170 g51v2, 1-Byte Count, count: 1
05:28:19.170 time: 1793251699168
05:28:19.170 g2v3, 2-Byte Count and Index, count: 10
05:28:19.170 [0] - flags: 0x81 cto: 0
05:28:19.170 [1] - flags: 0x81 cto: 1
05:28:19.170 [2] - flags: 0x81 cto: 1
05:28:19.170 [3] - flags: 0x81 cto: 1
05:28:19.170 [4] - flags: 0x81 cto: 1
05:28:19.170 [5] - flags: 0x81 cto: 1
05:28:19.170 [6] - flags: 0x81 cto: 1
05:28:19.170 [7] - flags: 0x81 cto: 1
05:28:19.170 [8] - flags: 0x81 cto: 1
05:28:19.170 [9] - flags: 0x81 cto: 1
05:28:19.170 --A-> Confirm(0x00) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
05:28:19.170 --T-> fir: 1 fin: 1 seq: 0
05:28:19.170 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 8 dest: 1024 src: 1
05:28:19.171 --P-> 05 64 08 C4 00 04 01 00 9A 19
05:28:19.171 C0 C1 00 7D 3D
05:28:19.171 [PLG] Verified 10 binary input point event(s)
05:28:19.171 step: 15
05:28:19.171 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02
05:28:19.171 - g2v0, All Objects
05:28:19.171 - (Only if IIN1.4 was set in step 3's response)
05:28:19.171 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02
05:28:19.171 g2v0, All Objects
05:28:19.171 --T-> fir: 1 fin: 1 seq: 0
05:28:19.171 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
05:28:19.171 --P-> 05 64 0B C4 00 04 01 00 CA 8A
05:28:19.171 C0 C2 01 02 00 06 9F 13
05:28:19.171 step: 16
05:28:19.171 - Read a single fragment response w/ sequence(0x02)
05:28:19.171 - Verify that the response is empty
05:28:19.171 - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported)
05:28:19.171 - (Only if IIN1.4 was set in step 3's response)
05:28:19.171 <-P-- 05 64 0A 44 01 00 00 04 67 88
05:28:19.171 C2 C2 81 90 00 3E A2
05:28:19.171 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024
05:28:19.171 <-T-- fir: 1 fin: 1 seq: 2
05:28:19.172 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 IIN(DeviceRestart, NeedTime)
05:28:19.172 step: 17
05:28:19.172 - Write the current time + 5 ms w/ sequence(0x03)
05:28:19.172 - (Only if IIN1.4 was set in step 3's response, and the master can write the time)
05:28:19.172 --A-> Write(0x02) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03
05:28:19.172 g50v1, 1-Byte Count, count: 1
05:28:19.172 time: 1793251699177
05:28:19.172 --T-> fir: 1 fin: 1 seq: 0
05:28:19.172 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 18 dest: 1024 src: 1
05:28:19.172 --P-> 05 64 12 C4 00 04 01 00 30 DD
05:28:19.172 C0 C3 02 32 01 07 01 E9 69 21 86 A1 01 7E 32
05:28:19.172 step: 18
05:28:19.172 - Read a single fragment response w/ sequence(0x03)
05:28:19.172 - Verify that the response is empty
05:28:19.172 - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported)
05:28:19.172 - Verify that the IIN field does not contain bits IIN(NeedTime)
05:28:19.172 - (Only if IIN1.4 was set in step 3's response, and the master can write the time)
05:28:19.172 <-P-- 05 64 0A 44 01 00 00 04 67 88
05:28:19.172 C3 C3 81 80 00 F8 9C
05:28:19.172 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024
05:28:19.172 <-T-- fir: 1 fin: 1 seq: 3
05:28:19.172 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03 IIN(DeviceRestart)
05:28:19.172 step: 19
05:28:19.172 - Change binary inputs several times, one or more of them, to create events
05:28:19.172 [PLG] Updated BI 0: value=false, flags=1, timestamp=1793251699177 (SYNCHRONIZED_TIME)
05:28:19.172 [PLG] Updated BI 1: value=false, flags=1, timestamp=1793251699177 (SYNCHRONIZED_TIME)
05:28:19.172 [PLG] Updated BI 2: value=false, flags=1, timestamp=1793251699177 (SYNCHRONIZED_TIME)
05:28:19.172 [PLG] Updated BI 3: value=false, flags=1, timestamp=1793251699177 (SYNCHRONIZED_TIME)
05:28:19.172 [PLG] Updated BI 4: value=false, flags=1, timestamp=1793251699177 (SYNCHRONIZED_TIME)
05:28:19.172 [PLG] Updated BI 5: value=false, flags=1, timestamp=1793251699177 (SYNCHRONIZED_TIME)
05:28:19.172 [PLG] Updated BI 6: value=false, flags=1, timestamp=1793251699177 (SYNCHRONIZED_TIME)
05:28:19.172 [PLG] Updated BI 7: value=false, flags=1, timestamp=1793251699177 (SYNCHRONIZED_TIME)
05:28:19.172 [PLG] Updated BI 8: value=false, flags=1, timestamp=1793251699177 (SYNCHRONIZED_TIME)
05:28:19.172 [PLG] Updated BI 9: value=false, flags=1, timestamp=1793251699177 (SYNCHRONIZED_TIME)
05:28:19.172 The plugin reports the DUT's clock synchronized
05:28:19.172 step: 20
05:28:19.172 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x04
05:28:19.172 - g2v3, All Objects
05:28:19.172 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x04
05:28:19.172 g2v3, All Objects
05:28:19.172 --T-> fir: 1 fin: 1 seq: 0
05:28:19.172 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
05:28:19.172 --P-> 05 64 0B C4 00 04 01 00 CA 8A
05:28:19.172 C0 C4 01 02 03 06 20 69
05:28:19.173 steps: 21 to 28
05:28:19.173 - Read a single fragment response w/ sequence(0x04)
05:28:19.173 - Verify that the response holds every Binary Input event generated
05:28:19.173 - If the events carry timestamps, verify that the gaps between them match the gaps between when the events were generated, to the Device Profile's resolution
05:28:19.173 - Verify that an application layer confirmation is requested.
05:28:19.173 - Verify that the events are reported as 3.1r1's rules for event reporting require, for a read of g2v3, by the state of the DUT's clock when it recorded them, where the procedure or the plugin knows it
05:28:19.173 - Verify that the flags behave as the note on flags in Section 2 requires (Note 5 in 2.7, Note 6 in 3.1r1).
05:28:19.173 - Confirm each response that asks for a confirmation
05:28:19.173 <-P-- 05 64 4B 44 01 00 00 04 FD 93
05:28:19.173 C4 E4 81 80 00 33 01 07 01 E9 69 21 86 A1 01 02 DF C7
05:28:19.173 03 28 0A 00 00 00 01 00 00 01 00 01 00 00 02 00 04 EA
05:28:19.173 01 00 00 03 00 01 00 00 04 00 01 00 00 05 00 01 19 E1
05:28:19.173 00 00 06 00 01 00 00 07 00 01 00 00 08 00 01 00 8E 16
05:28:19.173 00 09 00 01 00 00 08 90
05:28:19.173 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 75 dest: 1 src: 1024
05:28:19.173 <-T-- fir: 1 fin: 1 seq: 4
05:28:19.173 <-A-- Response(0x81) fir: 1 fin: 1 con: 1 uns: 0 seq: 0x04 IIN(DeviceRestart)
05:28:19.173 g51v1, 1-Byte Count, count: 1
05:28:19.173 time: 1793251699177
05:28:19.173 g2v3, 2-Byte Count and Index, count: 10
05:28:19.173 [0] - flags: 0x01 cto: 0
05:28:19.173 [1] - flags: 0x01 cto: 0
05:28:19.173 [2] - flags: 0x01 cto: 0
05:28:19.173 [3] - flags: 0x01 cto: 0
05:28:19.173 [4] - flags: 0x01 cto: 0
05:28:19.173 [5] - flags: 0x01 cto: 0
05:28:19.173 [6] - flags: 0x01 cto: 0
05:28:19.173 [7] - flags: 0x01 cto: 0
05:28:19.173 [8] - flags: 0x01 cto: 0
05:28:19.173 [9] - flags: 0x01 cto: 0
05:28:19.173 --A-> Confirm(0x00) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x04
05:28:19.173 --T-> fir: 1 fin: 1 seq: 0
05:28:19.173 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 8 dest: 1024 src: 1
05:28:19.173 --P-> 05 64 08 C4 00 04 01 00 9A 19
05:28:19.173 C0 C4 00 F9 A1
05:28:19.174 [PLG] Verified 10 binary input point event(s)
05:28:19.174 step: 29
05:28:19.174 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x05
05:28:19.174 - g2v0, All Objects
05:28:19.174 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x05
05:28:19.174 g2v0, All Objects
05:28:19.174 --T-> fir: 1 fin: 1 seq: 0
05:28:19.174 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
05:28:19.174 --P-> 05 64 0B C4 00 04 01 00 CA 8A
05:28:19.174 C0 C5 01 02 00 06 8D FA
05:28:19.174 step: 30
05:28:19.174 - Read a single fragment response w/ sequence(0x05)
05:28:19.174 - Verify that the response is empty
05:28:19.174 - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported)
05:28:19.174 <-P-- 05 64 0A 44 01 00 00 04 67 88
05:28:19.174 C5 C5 81 80 00 6E 42
05:28:19.174 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024
05:28:19.174 <-T-- fir: 1 fin: 1 seq: 5
05:28:19.174 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x05 IIN(DeviceRestart)
05:28:19.174 step: 31
05:28:19.174 - If the DUT doesn't report events with relative time, or never sets IIN1.4, skip the rest of this test
05:28:19.174 step: 32
05:28:19.174 - Wait for 5000 milliseconds
05:28:19.174 - (Only if the DUT reports events with relative time and asks for the time)
05:28:24.175 step: 33
05:28:24.175 - Wait for 5000 milliseconds
05:28:24.175 - (Only if the DUT reports events with relative time and asks for the time)
05:28:29.175 step: 34
05:28:29.175 - Change binary inputs several times, one or more of them, to create events
05:28:29.175 - (Only if the DUT reports events with relative time and asks for the time)
05:28:29.175 [PLG] Updated BI 0: value=true, flags=81, timestamp=1793251709180 (UNSYNCHRONIZED_TIME)
05:28:29.175 [PLG] Updated BI 1: value=true, flags=81, timestamp=1793251709180 (UNSYNCHRONIZED_TIME)
05:28:29.175 [PLG] Updated BI 2: value=true, flags=81, timestamp=1793251709180 (UNSYNCHRONIZED_TIME)
05:28:29.175 [PLG] Updated BI 3: value=true, flags=81, timestamp=1793251709180 (UNSYNCHRONIZED_TIME)
05:28:29.175 [PLG] Updated BI 4: value=true, flags=81, timestamp=1793251709180 (UNSYNCHRONIZED_TIME)
05:28:29.175 [PLG] Updated BI 5: value=true, flags=81, timestamp=1793251709180 (UNSYNCHRONIZED_TIME)
05:28:29.175 [PLG] Updated BI 6: value=true, flags=81, timestamp=1793251709180 (UNSYNCHRONIZED_TIME)
05:28:29.175 [PLG] Updated BI 7: value=true, flags=81, timestamp=1793251709180 (UNSYNCHRONIZED_TIME)
05:28:29.175 [PLG] Updated BI 8: value=true, flags=81, timestamp=1793251709180 (UNSYNCHRONIZED_TIME)
05:28:29.175 [PLG] Updated BI 9: value=true, flags=81, timestamp=1793251709180 (UNSYNCHRONIZED_TIME)
05:28:29.175 The plugin reports the DUT's clock unsynchronized
05:28:29.175 step: 35
05:28:29.175 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x06
05:28:29.175 - g2v3, All Objects
05:28:29.175 - (Only if the DUT reports events with relative time and asks for the time)
05:28:29.175 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x06
05:28:29.175 g2v3, All Objects
05:28:29.175 --T-> fir: 1 fin: 1 seq: 0
05:28:29.175 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
05:28:29.175 --P-> 05 64 0B C4 00 04 01 00 CA 8A
05:28:29.175 C0 C6 01 02 03 06 2C 2F
05:28:29.176 steps: 36 to 38
05:28:29.176 - Read a single fragment response w/ sequence(0x06)
05:28:29.176 - Verify that the response holds every Binary Input event generated
05:28:29.176 - If the events carry timestamps, verify that the gaps between them match the gaps between when the events were generated, to the Device Profile's resolution
05:28:29.176 - Verify that an application layer confirmation is requested.
05:28:29.176 - Verify that the events are reported as 3.1r1's rules for event reporting require, for a read of g2v3, by the state of the DUT's clock when it recorded them, where the procedure or the plugin knows it
05:28:29.176 - Verify that the flags behave as the note on flags in Section 2 requires (Note 5 in 2.7, Note 6 in 3.1r1).
05:28:29.176 - Confirm each response that asks for a confirmation
05:28:29.176 - (Only if the DUT reports events with relative time and asks for the time)
05:28:29.176 <-P-- 05 64 4B 44 01 00 00 04 FD 93
05:28:29.176 C6 E6 81 90 00 33 02 07 01 FC 90 21 86 A1 01 02 AD FB
05:28:29.176 03 28 0A 00 00 00 81 00 00 01 00 81 00 00 02 00 AC 42
05:28:29.176 81 00 00 03 00 81 00 00 04 00 81 00 00 05 00 81 9B 00
05:28:29.176 00 00 06 00 81 00 00 07 00 81 00 00 08 00 81 00 A9 FA
05:28:29.176 00 09 00 81 00 00 AF C5
05:28:29.176 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 75 dest: 1 src: 1024
05:28:29.176 <-T-- fir: 1 fin: 1 seq: 6
05:28:29.176 <-A-- Response(0x81) fir: 1 fin: 1 con: 1 uns: 0 seq: 0x06 IIN(DeviceRestart, NeedTime)
05:28:29.176 g51v2, 1-Byte Count, count: 1
05:28:29.176 time: 1793251709180
05:28:29.176 g2v3, 2-Byte Count and Index, count: 10
05:28:29.176 [0] - flags: 0x81 cto: 0
05:28:29.176 [1] - flags: 0x81 cto: 0
05:28:29.176 [2] - flags: 0x81 cto: 0
05:28:29.176 [3] - flags: 0x81 cto: 0
05:28:29.176 [4] - flags: 0x81 cto: 0
05:28:29.176 [5] - flags: 0x81 cto: 0
05:28:29.176 [6] - flags: 0x81 cto: 0
05:28:29.176 [7] - flags: 0x81 cto: 0
05:28:29.176 [8] - flags: 0x81 cto: 0
05:28:29.176 [9] - flags: 0x81 cto: 0
05:28:29.176 --A-> Confirm(0x00) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x06
05:28:29.176 --T-> fir: 1 fin: 1 seq: 0
05:28:29.176 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 8 dest: 1024 src: 1
05:28:29.176 --P-> 05 64 08 C4 00 04 01 00 9A 19
05:28:29.176 C0 C6 00 1C BA
05:28:29.177 [PLG] Verified 10 binary input point event(s)
05:28:29.177 Passed procedure: 8.14.2m