| 05:30:09.489 | Running procedure: 8.18.2c | |
| 05:30:09.491 | This procedure is enabled because the following options: | |
| 05:30:09.491 | - supports.analogInputReads == true | |
| 05:30:09.491 | - supports.analogInput == true | |
| 05:30:09.491 | step: 1 | |
| 05:30:09.491 | - Input analog data | |
| 05:30:09.491 | [PLG] | Updated AI 0: value=100.0, flags=1, timestamp=1793251809491 (UNSYNCHRONIZED_TIME) |
| 05:30:09.491 | [PLG] | Updated AI 1: value=100.0, flags=1, timestamp=1793251809491 (UNSYNCHRONIZED_TIME) |
| 05:30:09.491 | [PLG] | Updated AI 2: value=100.0, flags=1, timestamp=1793251809491 (UNSYNCHRONIZED_TIME) |
| 05:30:09.491 | [PLG] | Updated AI 3: value=100.0, flags=1, timestamp=1793251809491 (UNSYNCHRONIZED_TIME) |
| 05:30:09.491 | [PLG] | Updated AI 4: value=100.0, flags=1, timestamp=1793251809491 (UNSYNCHRONIZED_TIME) |
| 05:30:09.491 | [PLG] | Updated AI 5: value=100.0, flags=1, timestamp=1793251809491 (UNSYNCHRONIZED_TIME) |
| 05:30:09.491 | [PLG] | Updated AI 6: value=100.0, flags=1, timestamp=1793251809491 (UNSYNCHRONIZED_TIME) |
| 05:30:09.491 | [PLG] | Updated AI 7: value=100.0, flags=1, timestamp=1793251809491 (UNSYNCHRONIZED_TIME) |
| 05:30:09.491 | [PLG] | Updated AI 8: value=100.0, flags=1, timestamp=1793251809491 (UNSYNCHRONIZED_TIME) |
| 05:30:09.491 | [PLG] | Updated AI 9: value=100.0, flags=1, timestamp=1793251809491 (UNSYNCHRONIZED_TIME) |
| 05:30:09.491 | step: 2 | |
| 05:30:09.491 | - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 | |
| 05:30:09.491 | - g30v0, All Objects | |
| 05:30:09.492 | --A-> | Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 |
| 05:30:09.492 | g30v0, All Objects | |
| 05:30:09.492 | --T-> | fir: 1 fin: 1 seq: 0 |
| 05:30:09.492 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1 |
| 05:30:09.492 | --P-> | 05 64 0B C4 00 04 01 00 CA 8A |
| 05:30:09.492 | C0 C0 01 1E 00 06 4A 28 | |
| 05:30:09.492 | steps: 3 to 4 | |
| 05:30:09.492 | - Read any number of valid responses beginning w/ sequence(0x00) and incrementing by 1 modulo 16 | |
| 05:30:09.492 | - Verify that the device responds with only variations: Set(g30v1, g30v2, g30v3, g30v4) | |
| 05:30:09.492 | - Verify that the objects are in start/stop ranges with 1-octet (qualifier 0x00) or 2-octet (qualifier 0x01) indexes | |
| 05:30:09.492 | - Verify that the flags behave as the note on flags in Section 2 requires (Note 5 in 2.7, Note 6 in 3.1r1). | |
| 05:30:09.492 | - Verify that the DUT reports the applied value for each analog input tested | |
| 05:30:09.492 | - Confirm each response that asks for a confirmation | |
| 05:30:09.492 | <-P-- | 05 64 2F 44 01 00 00 04 6C 81 |
| 05:30:09.492 | C0 C0 81 98 00 1E 02 01 00 00 09 00 01 64 00 01 E9 23 | |
| 05:30:09.492 | 64 00 01 64 00 01 64 00 01 64 00 01 64 00 01 64 B2 CE | |
| 05:30:09.492 | 00 01 64 00 01 64 00 01 64 00 C8 F7 | |
| 05:30:09.492 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 47 dest: 1 src: 1024 |
| 05:30:09.492 | <-T-- | fir: 1 fin: 1 seq: 0 |
| 05:30:09.493 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 IIN(DeviceRestart, NeedTime, Class3Events) |
| 05:30:09.493 | g30v2, 2-Byte Start/Stop, start: 0 stop: 9 | |
| 05:30:09.493 | [0] - flags: 0x01 value: 100 | |
| 05:30:09.493 | [1] - flags: 0x01 value: 100 | |
| 05:30:09.493 | [2] - flags: 0x01 value: 100 | |
| 05:30:09.493 | [3] - flags: 0x01 value: 100 | |
| 05:30:09.493 | [4] - flags: 0x01 value: 100 | |
| 05:30:09.493 | [5] - flags: 0x01 value: 100 | |
| 05:30:09.493 | [6] - flags: 0x01 value: 100 | |
| 05:30:09.493 | [7] - flags: 0x01 value: 100 | |
| 05:30:09.493 | [8] - flags: 0x01 value: 100 | |
| 05:30:09.493 | [9] - flags: 0x01 value: 100 | |
| 05:30:09.493 | [PLG] | Verified 10 analog input point(s) |
| 05:30:09.493 | Passed procedure: 8.18.2c |