8.19.2c Analog Input Change, Without Confirm (revision 3.1r1, subset level 3)

Device under test: Step Function I/O dnp3 outstation

All results
05:30:09.953 Running procedure: 8.19.2c
05:30:09.954 This procedure is enabled because the following options:
05:30:09.954 - supports.analogInputEventReads == true
05:30:09.954 - supports.analogInput == true
05:30:09.954 - supports.analogInputChangeEvents == true
05:30:09.954 step: 1
05:30:09.954 - Raise an analog input by more than its configured deadband and hold it steady, so that an event is generated
05:30:09.954 [PLG] Updated AI 0: value=100.0, flags=1, timestamp=1793251809954 (UNSYNCHRONIZED_TIME)
05:30:09.954 [PLG] Updated AI 1: value=100.0, flags=1, timestamp=1793251809954 (UNSYNCHRONIZED_TIME)
05:30:09.955 [PLG] Updated AI 2: value=100.0, flags=1, timestamp=1793251809954 (UNSYNCHRONIZED_TIME)
05:30:09.955 [PLG] Updated AI 3: value=100.0, flags=1, timestamp=1793251809955 (UNSYNCHRONIZED_TIME)
05:30:09.955 [PLG] Updated AI 4: value=100.0, flags=1, timestamp=1793251809955 (UNSYNCHRONIZED_TIME)
05:30:09.955 [PLG] Updated AI 5: value=100.0, flags=1, timestamp=1793251809955 (UNSYNCHRONIZED_TIME)
05:30:09.955 [PLG] Updated AI 6: value=100.0, flags=1, timestamp=1793251809955 (UNSYNCHRONIZED_TIME)
05:30:09.955 [PLG] Updated AI 7: value=100.0, flags=1, timestamp=1793251809955 (UNSYNCHRONIZED_TIME)
05:30:09.955 [PLG] Updated AI 8: value=100.0, flags=1, timestamp=1793251809955 (UNSYNCHRONIZED_TIME)
05:30:09.955 [PLG] Updated AI 9: value=100.0, flags=1, timestamp=1793251809955 (UNSYNCHRONIZED_TIME)
05:30:09.955 step: 2
05:30:09.955 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
05:30:09.955 - g32v0, All Objects
05:30:09.955 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
05:30:09.955 g32v0, All Objects
05:30:09.955 --T-> fir: 1 fin: 1 seq: 0
05:30:09.955 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
05:30:09.955 --P-> 05 64 0B C4 00 04 01 00 CA 8A
05:30:09.955 C0 C0 01 20 00 06 68 86
05:30:09.956 steps: 3 to 6
05:30:09.956 - Read a single fragment response w/ sequence(0x00)
05:30:09.956 - Verify that the device responds with events, of only Set(g32v1, g32v2)
05:30:09.956 - Verify that the objects are prefixed with 1-octet (qualifier 0x17) or 2-octet (qualifier 0x28) indexes
05:30:09.956 - Verify that the reported value is the one the analog input was set to
05:30:09.956 - Verify that the flags behave as the note on flags in Section 2 requires (Note 5 in 2.7, Note 6 in 3.1r1).
05:30:09.956 - Verify that an application layer confirmation is requested.
05:30:09.956 <-P-- 05 64 55 44 01 00 00 04 39 1A
05:30:09.956 C0 E0 81 90 00 20 01 28 0A 00 00 00 01 64 00 00 D6 FC
05:30:09.956 00 01 00 01 64 00 00 00 02 00 01 64 00 00 00 03 39 99
05:30:09.956 00 01 64 00 00 00 04 00 01 64 00 00 00 05 00 01 91 5E
05:30:09.956 64 00 00 00 06 00 01 64 00 00 00 07 00 01 64 00 78 60
05:30:09.956 00 00 08 00 01 64 00 00 00 09 00 01 64 00 00 00 7B EA
05:30:09.956 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 85 dest: 1 src: 1024
05:30:09.956 <-T-- fir: 1 fin: 1 seq: 0
05:30:09.956 <-A-- Response(0x81) fir: 1 fin: 1 con: 1 uns: 0 seq: 0x00 IIN(DeviceRestart, NeedTime)
05:30:09.956 g32v1, 2-Byte Count and Index, count: 10
05:30:09.956 [0] - flags: 0x01 value: 100
05:30:09.956 [1] - flags: 0x01 value: 100
05:30:09.956 [2] - flags: 0x01 value: 100
05:30:09.956 [3] - flags: 0x01 value: 100
05:30:09.956 [4] - flags: 0x01 value: 100
05:30:09.956 [5] - flags: 0x01 value: 100
05:30:09.956 [6] - flags: 0x01 value: 100
05:30:09.956 [7] - flags: 0x01 value: 100
05:30:09.956 [8] - flags: 0x01 value: 100
05:30:09.956 [9] - flags: 0x01 value: 100
05:30:09.957 [PLG] Verified 10 analog input point event(s)
05:30:09.957 steps: 7 to 8
05:30:09.957 - Expect no response within 6000 ms.
05:30:15.962 step: 9
05:30:15.962 - Raise an analog input by more than its configured deadband and hold it steady, so that an event is generated
05:30:15.962 [PLG] Updated AI 0: value=200.0, flags=1, timestamp=1793251815962 (UNSYNCHRONIZED_TIME)
05:30:15.962 [PLG] Updated AI 1: value=200.0, flags=1, timestamp=1793251815962 (UNSYNCHRONIZED_TIME)
05:30:15.962 [PLG] Updated AI 2: value=200.0, flags=1, timestamp=1793251815962 (UNSYNCHRONIZED_TIME)
05:30:15.962 [PLG] Updated AI 3: value=200.0, flags=1, timestamp=1793251815962 (UNSYNCHRONIZED_TIME)
05:30:15.962 [PLG] Updated AI 4: value=200.0, flags=1, timestamp=1793251815962 (UNSYNCHRONIZED_TIME)
05:30:15.962 [PLG] Updated AI 5: value=200.0, flags=1, timestamp=1793251815962 (UNSYNCHRONIZED_TIME)
05:30:15.962 [PLG] Updated AI 6: value=200.0, flags=1, timestamp=1793251815962 (UNSYNCHRONIZED_TIME)
05:30:15.962 [PLG] Updated AI 7: value=200.0, flags=1, timestamp=1793251815962 (UNSYNCHRONIZED_TIME)
05:30:15.962 [PLG] Updated AI 8: value=200.0, flags=1, timestamp=1793251815962 (UNSYNCHRONIZED_TIME)
05:30:15.962 [PLG] Updated AI 9: value=200.0, flags=1, timestamp=1793251815962 (UNSYNCHRONIZED_TIME)
05:30:15.962 step: 10
05:30:15.962 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
05:30:15.962 - g32v0, All Objects
05:30:15.962 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
05:30:15.962 g32v0, All Objects
05:30:15.962 --T-> fir: 1 fin: 1 seq: 0
05:30:15.962 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
05:30:15.963 --P-> 05 64 0B C4 00 04 01 00 CA 8A
05:30:15.963 C0 C1 01 20 00 06 6E A5
05:30:15.963 steps: 11 to 14
05:30:15.963 - Read a single fragment response w/ sequence(0x01)
05:30:15.963 - Verify that the device responds with events, of only Set(g32v1, g32v2)
05:30:15.963 - Verify that the objects are prefixed with 1-octet (qualifier 0x17) or 2-octet (qualifier 0x28) indexes
05:30:15.963 - Verify that the reported value is the one the analog input was set to
05:30:15.963 - The DUT may also report the state applied in the first step before reporting the present state.
05:30:15.963 - Verify that the flags behave as the note on flags in Section 2 requires (Note 5 in 2.7, Note 6 in 3.1r1).
05:30:15.963 - Verify that an application layer confirmation is requested.
05:30:15.963 - Confirm each response that asks for a confirmation
05:30:15.965 <-P-- 05 64 9B 44 01 00 00 04 C2 54
05:30:15.965 C1 E1 81 90 00 20 01 28 14 00 00 00 01 64 00 00 E7 37
05:30:15.965 00 01 00 01 64 00 00 00 02 00 01 64 00 00 00 03 39 99
05:30:15.965 00 01 64 00 00 00 04 00 01 64 00 00 00 05 00 01 91 5E
05:30:15.965 64 00 00 00 06 00 01 64 00 00 00 07 00 01 64 00 78 60
05:30:15.965 00 00 08 00 01 64 00 00 00 09 00 01 64 00 00 00 7B EA
05:30:15.965 00 00 01 C8 00 00 00 01 00 01 C8 00 00 00 02 00 55 03
05:30:15.965 01 C8 00 00 00 03 00 01 C8 00 00 00 04 00 01 C8 E4 B3
05:30:15.965 00 00 00 05 00 01 C8 00 00 00 06 00 01 C8 00 00 AB 6E
05:30:15.965 00 07 00 01 C8 00 00 00 08 00 01 C8 00 00 00 09 A4 4F
05:30:15.965 00 01 C8 00 00 00 64 23
05:30:15.965 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 155 dest: 1 src: 1024
05:30:15.965 <-T-- fir: 1 fin: 1 seq: 1
05:30:15.965 <-A-- Response(0x81) fir: 1 fin: 1 con: 1 uns: 0 seq: 0x01 IIN(DeviceRestart, NeedTime)
05:30:15.965 g32v1, 2-Byte Count and Index, count: 20
05:30:15.965 [0] - flags: 0x01 value: 100
05:30:15.965 [1] - flags: 0x01 value: 100
05:30:15.965 [2] - flags: 0x01 value: 100
05:30:15.965 [3] - flags: 0x01 value: 100
05:30:15.965 [4] - flags: 0x01 value: 100
05:30:15.965 [5] - flags: 0x01 value: 100
05:30:15.965 [6] - flags: 0x01 value: 100
05:30:15.965 [7] - flags: 0x01 value: 100
05:30:15.965 [8] - flags: 0x01 value: 100
05:30:15.965 [9] - flags: 0x01 value: 100
05:30:15.965 [0] - flags: 0x01 value: 200
05:30:15.965 [1] - flags: 0x01 value: 200
05:30:15.965 [2] - flags: 0x01 value: 200
05:30:15.965 [3] - flags: 0x01 value: 200
05:30:15.965 [4] - flags: 0x01 value: 200
05:30:15.965 [5] - flags: 0x01 value: 200
05:30:15.965 [6] - flags: 0x01 value: 200
05:30:15.965 [7] - flags: 0x01 value: 200
05:30:15.965 [8] - flags: 0x01 value: 200
05:30:15.965 [9] - flags: 0x01 value: 200
05:30:15.965 --A-> Confirm(0x00) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
05:30:15.965 --T-> fir: 1 fin: 1 seq: 0
05:30:15.965 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 8 dest: 1024 src: 1
05:30:15.965 --P-> 05 64 08 C4 00 04 01 00 9A 19
05:30:15.965 C0 C1 00 7D 3D
05:30:15.966 [PLG] Verified the current value of 10 analog input(s)
05:30:15.966 step: 15
05:30:15.966 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02
05:30:15.966 - g32v0, All Objects
05:30:15.966 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02
05:30:15.966 g32v0, All Objects
05:30:15.966 --T-> fir: 1 fin: 1 seq: 0
05:30:15.966 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
05:30:15.967 --P-> 05 64 0B C4 00 04 01 00 CA 8A
05:30:15.967 C0 C2 01 20 00 06 64 C0
05:30:15.967 step: 16
05:30:15.967 - Read a single fragment response w/ sequence(0x02)
05:30:15.967 - Verify that the response is empty
05:30:15.967 - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported)
05:30:15.967 <-P-- 05 64 0A 44 01 00 00 04 67 88
05:30:15.967 C2 C2 81 90 00 3E A2
05:30:15.967 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024
05:30:15.967 <-T-- fir: 1 fin: 1 seq: 2
05:30:15.967 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 IIN(DeviceRestart, NeedTime)
05:30:15.967 Passed procedure: 8.19.2c