8.2.1.2.11 Binary Output, SBO, Same Sequence Number Select Retries (revision 3.1r1, subset level 3)

Device under test: Step Function I/O dnp3 outstation

All results
05:24:27.544 Running procedure: 8.2.1.2.11
05:24:27.546 This procedure is enabled because the following options:
05:24:27.546 - supports.binaryOutput.commands == true
05:24:27.546 step: 2
05:24:27.546 - Select(0x03) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
05:24:27.546 - g12v1, 1-Byte Count and Index, count: 1
05:24:27.546 - [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
05:24:27.546 --A-> Select(0x03) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
05:24:27.546 g12v1, 1-Byte Count and Index, count: 1
05:24:27.546 [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
05:24:27.546 --T-> fir: 1 fin: 1 seq: 0
05:24:27.546 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 24 dest: 1024 src: 1
05:24:27.547 --P-> 05 64 18 C4 00 04 01 00 5B 61
05:24:27.547 C0 C0 03 0C 01 17 01 00 03 01 64 00 00 00 C8 00 FD 11
05:24:27.547 00 00 00 FF FF
05:24:27.547 step: 3
05:24:27.547 - Read a single fragment response w/ sequence(0x00)
05:24:27.547 - Verify the response contains the exact object header:
05:24:27.547 - g12v1, 1-Byte Count and Index, count: 1
05:24:27.547 - [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
05:24:27.547 - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported)
05:24:27.548 <-P-- 05 64 1A 44 01 00 00 04 A6 F0
05:24:27.548 C0 C0 81 90 00 0C 01 17 01 00 03 01 64 00 00 00 9C 9A
05:24:27.548 C8 00 00 00 00 78 FB
05:24:27.548 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 26 dest: 1 src: 1024
05:24:27.548 <-T-- fir: 1 fin: 1 seq: 0
05:24:27.548 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 IIN(DeviceRestart, NeedTime)
05:24:27.548 g12v1, 1-Byte Count and Index, count: 1
05:24:27.548 [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
05:24:27.548 step: 4
05:24:27.548 - Select(0x03) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
05:24:27.548 - g12v1, 1-Byte Count and Index, count: 1
05:24:27.548 - [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
05:24:27.548 --A-> Select(0x03) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
05:24:27.548 g12v1, 1-Byte Count and Index, count: 1
05:24:27.548 [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
05:24:27.548 --T-> fir: 1 fin: 1 seq: 0
05:24:27.548 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 24 dest: 1024 src: 1
05:24:27.549 --P-> 05 64 18 C4 00 04 01 00 5B 61
05:24:27.549 C0 C0 03 0C 01 17 01 00 03 01 64 00 00 00 C8 00 FD 11
05:24:27.549 00 00 00 FF FF
05:24:27.549 step: 5
05:24:27.549 - Read a single fragment response w/ sequence(0x00)
05:24:27.549 - Verify the response contains the exact object header:
05:24:27.549 - g12v1, 1-Byte Count and Index, count: 1
05:24:27.549 - [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
05:24:27.549 - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported)
05:24:27.549 <-P-- 05 64 1A 44 01 00 00 04 A6 F0
05:24:27.549 C1 C0 81 90 00 0C 01 17 01 00 03 01 64 00 00 00 10 D7
05:24:27.549 C8 00 00 00 00 78 FB
05:24:27.549 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 26 dest: 1 src: 1024
05:24:27.549 <-T-- fir: 1 fin: 1 seq: 1
05:24:27.549 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 IIN(DeviceRestart, NeedTime)
05:24:27.549 g12v1, 1-Byte Count and Index, count: 1
05:24:27.549 [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
05:24:27.550 step: 6
05:24:27.550 - Operate(0x04) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
05:24:27.550 - g12v1, 1-Byte Count and Index, count: 1
05:24:27.550 - [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
05:24:27.550 --A-> Operate(0x04) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
05:24:27.550 g12v1, 1-Byte Count and Index, count: 1
05:24:27.550 [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
05:24:27.550 --T-> fir: 1 fin: 1 seq: 0
05:24:27.550 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 24 dest: 1024 src: 1
05:24:27.550 --P-> 05 64 18 C4 00 04 01 00 5B 61
05:24:27.550 C0 C1 04 0C 01 17 01 00 03 01 64 00 00 00 C8 00 35 C7
05:24:27.550 00 00 00 FF FF
05:24:27.550 step: 7
05:24:27.550 - Read a single fragment response w/ sequence(0x01)
05:24:27.550 - Verify the response contains the exact object header:
05:24:27.550 - g12v1, 1-Byte Count and Index, count: 1
05:24:27.550 - [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
05:24:27.550 - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported)
05:24:27.550 <-P-- 05 64 1A 44 01 00 00 04 A6 F0
05:24:27.550 C2 C1 81 90 00 0C 01 17 01 00 03 01 64 00 00 00 9C 6F
05:24:27.550 C8 00 00 00 00 78 FB
05:24:27.550 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 26 dest: 1 src: 1024
05:24:27.550 <-T-- fir: 1 fin: 1 seq: 2
05:24:27.551 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 IIN(DeviceRestart, NeedTime)
05:24:27.551 g12v1, 1-Byte Count and Index, count: 1
05:24:27.551 [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
05:24:27.551 step: 8
05:24:27.551 - Check that binary control point 0 operate
05:24:27.551 [PLG] Binary output 0 did operate
05:24:27.551 Passed procedure: 8.2.1.2.11