8.2.1.2.12 Binary Output, SBO, Incrementing Sequence Number Select Retries (revision 3.1r1, subset level 3)

Device under test: Step Function I/O dnp3 outstation

All results
05:24:27.780 Running procedure: 8.2.1.2.12
05:24:27.782 This procedure is enabled because the following options:
05:24:27.782 - supports.binaryOutput.commands == true
05:24:27.782 step: 2
05:24:27.782 - Select(0x03) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
05:24:27.782 - g12v1, 1-Byte Count and Index, count: 1
05:24:27.782 - [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
05:24:27.782 --A-> Select(0x03) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
05:24:27.782 g12v1, 1-Byte Count and Index, count: 1
05:24:27.782 [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
05:24:27.782 --T-> fir: 1 fin: 1 seq: 0
05:24:27.783 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 24 dest: 1024 src: 1
05:24:27.783 --P-> 05 64 18 C4 00 04 01 00 5B 61
05:24:27.783 C0 C0 03 0C 01 17 01 00 03 01 64 00 00 00 C8 00 FD 11
05:24:27.783 00 00 00 FF FF
05:24:27.783 step: 3
05:24:27.783 - Read a single fragment response w/ sequence(0x00)
05:24:27.783 - Verify the response contains the exact object header:
05:24:27.783 - g12v1, 1-Byte Count and Index, count: 1
05:24:27.783 - [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
05:24:27.783 - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported)
05:24:27.783 <-P-- 05 64 1A 44 01 00 00 04 A6 F0
05:24:27.783 C0 C0 81 90 00 0C 01 17 01 00 03 01 64 00 00 00 9C 9A
05:24:27.783 C8 00 00 00 00 78 FB
05:24:27.783 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 26 dest: 1 src: 1024
05:24:27.783 <-T-- fir: 1 fin: 1 seq: 0
05:24:27.784 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 IIN(DeviceRestart, NeedTime)
05:24:27.784 g12v1, 1-Byte Count and Index, count: 1
05:24:27.784 [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
05:24:27.784 step: 4
05:24:27.784 - Select(0x03) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
05:24:27.784 - g12v1, 1-Byte Count and Index, count: 1
05:24:27.784 - [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
05:24:27.784 --A-> Select(0x03) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
05:24:27.784 g12v1, 1-Byte Count and Index, count: 1
05:24:27.784 [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
05:24:27.784 --T-> fir: 1 fin: 1 seq: 0
05:24:27.784 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 24 dest: 1024 src: 1
05:24:27.784 --P-> 05 64 18 C4 00 04 01 00 5B 61
05:24:27.784 C0 C1 03 0C 01 17 01 00 03 01 64 00 00 00 C8 00 E5 7F
05:24:27.784 00 00 00 FF FF
05:24:27.784 step: 5
05:24:27.784 - Read a single fragment response w/ sequence(0x01)
05:24:27.784 - Verify the response contains the exact object header:
05:24:27.784 - g12v1, 1-Byte Count and Index, count: 1
05:24:27.784 - [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
05:24:27.784 - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported)
05:24:27.785 <-P-- 05 64 1A 44 01 00 00 04 A6 F0
05:24:27.785 C1 C1 81 90 00 0C 01 17 01 00 03 01 64 00 00 00 08 B9
05:24:27.785 C8 00 00 00 00 78 FB
05:24:27.785 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 26 dest: 1 src: 1024
05:24:27.785 <-T-- fir: 1 fin: 1 seq: 1
05:24:27.785 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 IIN(DeviceRestart, NeedTime)
05:24:27.785 g12v1, 1-Byte Count and Index, count: 1
05:24:27.785 [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
05:24:27.785 step: 6
05:24:27.785 - Operate(0x04) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02
05:24:27.785 - g12v1, 1-Byte Count and Index, count: 1
05:24:27.785 - [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
05:24:27.785 --A-> Operate(0x04) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02
05:24:27.785 g12v1, 1-Byte Count and Index, count: 1
05:24:27.785 [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
05:24:27.785 --T-> fir: 1 fin: 1 seq: 0
05:24:27.785 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 24 dest: 1024 src: 1
05:24:27.785 --P-> 05 64 18 C4 00 04 01 00 5B 61
05:24:27.785 C0 C2 04 0C 01 17 01 00 03 01 64 00 00 00 C8 00 1D 75
05:24:27.785 00 00 00 FF FF
05:24:27.785 step: 7
05:24:27.785 - Read a single fragment response w/ sequence(0x02)
05:24:27.785 - Verify the response contains the exact object header:
05:24:27.785 - g12v1, 1-Byte Count and Index, count: 1
05:24:27.785 - [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
05:24:27.785 - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported)
05:24:27.786 <-P-- 05 64 1A 44 01 00 00 04 A6 F0
05:24:27.786 C2 C2 81 90 00 0C 01 17 01 00 03 01 64 00 00 00 B4 DD
05:24:27.786 C8 00 00 00 00 78 FB
05:24:27.786 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 26 dest: 1 src: 1024
05:24:27.786 <-T-- fir: 1 fin: 1 seq: 2
05:24:27.786 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 IIN(DeviceRestart, NeedTime)
05:24:27.786 g12v1, 1-Byte Count and Index, count: 1
05:24:27.786 [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
05:24:27.786 step: 8
05:24:27.786 - Check that binary control point 0 operate
05:24:27.786 [PLG] Binary output 0 did operate
05:24:27.786 Passed procedure: 8.2.1.2.12