05:24:40.863		Running procedure: 8.2.3.2.3
05:24:40.864		This procedure is enabled because the following options:
05:24:40.864		- supports.binaryOutput.commands == true
05:24:40.864		- supports.disable.binaryOutput == true
05:24:40.865		step: 1
05:24:40.865		- The DUT's binary outputs can be uninstalled or disabled through its configuration
05:24:40.865		step: 2
05:24:40.865		- Uninstall or disable every binary output point on the DUT
05:24:40.865	[PLG]	All binary output status points were uninstalled
05:24:40.865	[PLG]	Cycling power
05:24:40.866		step: 3
05:24:40.866		- Direct Operate No Ack(0x06) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
05:24:40.866		- g12v1, 2-Byte Count and Index, count: 1
05:24:40.866		- [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
05:24:40.866	--A->	Direct Operate No Ack(0x06) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
05:24:40.866		g12v1, 2-Byte Count and Index, count: 1
05:24:40.866		[0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
05:24:40.866	--T->	fir: 1 fin: 1 seq: 0
05:24:40.867	--L->	master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 26 dest: 1024 src: 1
05:24:40.867	--P->	05 64 1A C4 00 04 01 00 EC 47
05:24:40.867		C0 C0 06 0C 01 28 01 00 00 00 03 01 64 00 00 00 CD AE
05:24:40.867		C8 00 00 00 00 78 FB
05:24:40.867		step: 4
05:24:40.867		- Verify that no link layer frames are received within 2000 ms
05:24:42.868		frame receive timeout
05:24:42.868		step: 5
05:24:42.868		- Check that no binary control point operated
05:24:43.870	[PLG]	Binary output did NOT operate
05:24:43.870		Passed procedure: 8.2.3.2.3
05:24:43.870		restore
05:24:43.870		- Reinstall or re-enable the points that were uninstalled or disabled, so later procedures can use them
05:24:43.870	[PLG]	All points were reinstalled
05:24:43.870	[PLG]	Cycling power