8.22f Double-bit Input Change Without Confirm (as 8.14.2f) (revision 3.1r1, subset level 3)

Device under test: Step Function I/O dnp3 outstation

All results
05:30:18.264 Running procedure: 8.22f
05:30:18.265 This procedure is enabled because the following options:
05:30:18.265 - supports.doubleBitInput == true
05:30:18.265 - supports.doubleBitInputChangeEvents == true
05:30:18.265 - supports.doubleBitInputEventReads == true
05:30:18.265 step: 1
05:30:18.265 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
05:30:18.265 - g4v0, All Objects
05:30:18.266 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
05:30:18.266 g4v0, All Objects
05:30:18.266 --T-> fir: 1 fin: 1 seq: 0
05:30:18.266 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
05:30:18.266 --P-> 05 64 0B C4 00 04 01 00 CA 8A
05:30:18.266 C0 C1 01 04 00 06 05 23
05:30:18.266 steps: 2 to 3
05:30:18.266 - Read any number of valid responses beginning w/ sequence(0x01) and incrementing by 1 modulo 16
05:30:18.266 - If the response carries data, verify that it asks for an application layer confirmation.
05:30:18.266 - Confirm each response that asks for a confirmation
05:30:18.266 <-P-- 05 64 0A 44 01 00 00 04 67 88
05:30:18.266 C0 C1 81 90 00 73 EE
05:30:18.266 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024
05:30:18.266 <-T-- fir: 1 fin: 1 seq: 0
05:30:18.266 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 IIN(DeviceRestart, NeedTime)
05:30:18.266 step: 4
05:30:18.266 - Change double-bit binary inputs several times, one or more of them, to create events
05:30:18.267 [PLG] Updated DBBI 0: value=DETERMINED_ON, flags=81, timestamp=1793251818267 (UNSYNCHRONIZED_TIME)
05:30:18.267 [PLG] Updated DBBI 1: value=DETERMINED_ON, flags=81, timestamp=1793251818267 (UNSYNCHRONIZED_TIME)
05:30:18.267 [PLG] Updated DBBI 2: value=DETERMINED_ON, flags=81, timestamp=1793251818267 (UNSYNCHRONIZED_TIME)
05:30:18.267 [PLG] Updated DBBI 3: value=DETERMINED_ON, flags=81, timestamp=1793251818267 (UNSYNCHRONIZED_TIME)
05:30:18.267 [PLG] Updated DBBI 4: value=DETERMINED_ON, flags=81, timestamp=1793251818267 (UNSYNCHRONIZED_TIME)
05:30:18.267 [PLG] Updated DBBI 5: value=DETERMINED_ON, flags=81, timestamp=1793251818267 (UNSYNCHRONIZED_TIME)
05:30:18.267 [PLG] Updated DBBI 6: value=DETERMINED_ON, flags=81, timestamp=1793251818267 (UNSYNCHRONIZED_TIME)
05:30:18.267 [PLG] Updated DBBI 7: value=DETERMINED_ON, flags=81, timestamp=1793251818267 (UNSYNCHRONIZED_TIME)
05:30:18.267 [PLG] Updated DBBI 8: value=DETERMINED_ON, flags=81, timestamp=1793251818267 (UNSYNCHRONIZED_TIME)
05:30:18.268 [PLG] Updated DBBI 9: value=DETERMINED_ON, flags=81, timestamp=1793251818267 (UNSYNCHRONIZED_TIME)
05:30:18.268 The plugin reports the DUT's clock unsynchronized
05:30:18.268 step: 5
05:30:18.268 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02
05:30:18.268 - g4v0, All Objects
05:30:18.268 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02
05:30:18.268 g4v0, All Objects
05:30:18.268 --T-> fir: 1 fin: 1 seq: 0
05:30:18.268 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
05:30:18.268 --P-> 05 64 0B C4 00 04 01 00 CA 8A
05:30:18.268 C0 C2 01 04 00 06 0F 46
05:30:18.268 steps: 6 to 10
05:30:18.268 - Read a single fragment response w/ sequence(0x02)
05:30:18.268 - Verify that the response holds every Double-bit Binary event generated
05:30:18.268 - If the events carry timestamps, verify that the gaps between them match the gaps between when the events were generated, to the Device Profile's resolution
05:30:18.268 - Verify that an application layer confirmation is requested.
05:30:18.268 - Verify that the events are reported as 3.1r1's rules for event reporting require, for a read of g4v0, by the state of the DUT's clock when it recorded them, where the procedure or the plugin knows it
05:30:18.268 - Verify that the flags behave as the note on flags in Section 2 requires (Note 5 in 2.7, Note 6 in 3.1r1).
05:30:18.268 - Keep the response's objects, to compare the next read's with
05:30:18.268 <-P-- 05 64 2D 44 01 00 00 04 DB A7
05:30:18.268 C1 E2 81 90 00 04 01 28 0A 00 00 00 81 01 00 81 E2 F3
05:30:18.268 02 00 81 03 00 81 04 00 81 05 00 81 06 00 81 07 7C AC
05:30:18.268 00 81 08 00 81 09 00 81 A0 4C
05:30:18.268 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 45 dest: 1 src: 1024
05:30:18.268 <-T-- fir: 1 fin: 1 seq: 1
05:30:18.268 <-A-- Response(0x81) fir: 1 fin: 1 con: 1 uns: 0 seq: 0x02 IIN(DeviceRestart, NeedTime)
05:30:18.268 g4v1, 2-Byte Count and Index, count: 10
05:30:18.268 [0] - flags: 0x81
05:30:18.268 [1] - flags: 0x81
05:30:18.268 [2] - flags: 0x81
05:30:18.268 [3] - flags: 0x81
05:30:18.268 [4] - flags: 0x81
05:30:18.268 [5] - flags: 0x81
05:30:18.268 [6] - flags: 0x81
05:30:18.268 [7] - flags: 0x81
05:30:18.268 [8] - flags: 0x81
05:30:18.268 [9] - flags: 0x81
05:30:18.269 [PLG] Verified 10 double-bit binary input point event(s)
05:30:18.269 step: 11
05:30:18.269 - Withhold the application layer confirmation for this response
05:30:18.269 steps: 12 to 13
05:30:18.269 - Expect no response within 6000 ms.
05:30:24.272 step: 14
05:30:24.272 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03
05:30:24.272 - g4v0, All Objects
05:30:24.272 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03
05:30:24.272 g4v0, All Objects
05:30:24.272 --T-> fir: 1 fin: 1 seq: 0
05:30:24.272 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
05:30:24.272 --P-> 05 64 0B C4 00 04 01 00 CA 8A
05:30:24.272 C0 C3 01 04 00 06 09 65
05:30:24.272 step: 15
05:30:24.272 - Read a single fragment response w/ sequence(0x03)
05:30:24.272 - Verify that the response carries the same objects as the previous one
05:30:24.272 <-P-- 05 64 2D 44 01 00 00 04 DB A7
05:30:24.272 C2 E3 81 90 00 04 01 28 0A 00 00 00 81 01 00 81 6E 4B
05:30:24.272 02 00 81 03 00 81 04 00 81 05 00 81 06 00 81 07 7C AC
05:30:24.272 00 81 08 00 81 09 00 81 A0 4C
05:30:24.272 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 45 dest: 1 src: 1024
05:30:24.272 <-T-- fir: 1 fin: 1 seq: 2
05:30:24.273 <-A-- Response(0x81) fir: 1 fin: 1 con: 1 uns: 0 seq: 0x03 IIN(DeviceRestart, NeedTime)
05:30:24.273 g4v1, 2-Byte Count and Index, count: 10
05:30:24.273 [0] - flags: 0x81
05:30:24.273 [1] - flags: 0x81
05:30:24.273 [2] - flags: 0x81
05:30:24.273 [3] - flags: 0x81
05:30:24.273 [4] - flags: 0x81
05:30:24.273 [5] - flags: 0x81
05:30:24.273 [6] - flags: 0x81
05:30:24.273 [7] - flags: 0x81
05:30:24.273 [8] - flags: 0x81
05:30:24.273 [9] - flags: 0x81
05:30:24.273 step: 16
05:30:24.273 - Withhold the application layer confirmation for this response too
05:30:24.273 steps: 17 to 18
05:30:24.273 - Expect no response within 6000 ms.
05:30:30.278 step: 19
05:30:30.278 - Change double-bit binary inputs several times, one or more of them, to create events
05:30:30.278 [PLG] Updated DBBI 0: value=DETERMINED_OFF, flags=41, timestamp=1793251830278 (UNSYNCHRONIZED_TIME)
05:30:30.278 [PLG] Updated DBBI 1: value=DETERMINED_OFF, flags=41, timestamp=1793251830278 (UNSYNCHRONIZED_TIME)
05:30:30.278 [PLG] Updated DBBI 2: value=DETERMINED_OFF, flags=41, timestamp=1793251830278 (UNSYNCHRONIZED_TIME)
05:30:30.278 [PLG] Updated DBBI 3: value=DETERMINED_OFF, flags=41, timestamp=1793251830278 (UNSYNCHRONIZED_TIME)
05:30:30.278 [PLG] Updated DBBI 4: value=DETERMINED_OFF, flags=41, timestamp=1793251830278 (UNSYNCHRONIZED_TIME)
05:30:30.279 [PLG] Updated DBBI 5: value=DETERMINED_OFF, flags=41, timestamp=1793251830278 (UNSYNCHRONIZED_TIME)
05:30:30.279 [PLG] Updated DBBI 6: value=DETERMINED_OFF, flags=41, timestamp=1793251830279 (UNSYNCHRONIZED_TIME)
05:30:30.279 [PLG] Updated DBBI 7: value=DETERMINED_OFF, flags=41, timestamp=1793251830279 (UNSYNCHRONIZED_TIME)
05:30:30.279 [PLG] Updated DBBI 8: value=DETERMINED_OFF, flags=41, timestamp=1793251830279 (UNSYNCHRONIZED_TIME)
05:30:30.279 [PLG] Updated DBBI 9: value=DETERMINED_OFF, flags=41, timestamp=1793251830279 (UNSYNCHRONIZED_TIME)
05:30:30.279 The plugin reports the DUT's clock unsynchronized
05:30:30.279 step: 20
05:30:30.279 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x04
05:30:30.279 - g4v0, All Objects
05:30:30.279 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x04
05:30:30.279 g4v0, All Objects
05:30:30.279 --T-> fir: 1 fin: 1 seq: 0
05:30:30.279 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
05:30:30.279 --P-> 05 64 0B C4 00 04 01 00 CA 8A
05:30:30.279 C0 C4 01 04 00 06 1B 8C
05:30:30.279 steps: 21 to 23
05:30:30.279 - Read a single fragment response w/ sequence(0x04)
05:30:30.279 - Verify that the response carries every Double-bit Binary event generated and not yet confirmed, in the order they occurred
05:30:30.279 - If the events carry timestamps, verify that the gaps between them match the gaps between when the events were generated, to the Device Profile's resolution
05:30:30.279 - Verify that an application layer confirmation is requested.
05:30:30.279 - Verify that the events are reported as 3.1r1's rules for event reporting require, for a read of g4v0, by the state of the DUT's clock when it recorded them, where the procedure or the plugin knows it
05:30:30.279 - Verify that the flags behave as the note on flags in Section 2 requires (Note 5 in 2.7, Note 6 in 3.1r1).
05:30:30.279 - Confirm each response that asks for a confirmation
05:30:30.280 <-P-- 05 64 4B 44 01 00 00 04 FD 93
05:30:30.280 C3 E4 81 90 00 04 01 28 14 00 00 00 81 01 00 81 76 A9
05:30:30.280 02 00 81 03 00 81 04 00 81 05 00 81 06 00 81 07 7C AC
05:30:30.280 00 81 08 00 81 09 00 81 00 00 41 01 00 41 02 00 5E 12
05:30:30.280 41 03 00 41 04 00 41 05 00 41 06 00 41 07 00 41 66 3A
05:30:30.280 08 00 41 09 00 41 DD 10
05:30:30.280 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 75 dest: 1 src: 1024
05:30:30.280 <-T-- fir: 1 fin: 1 seq: 3
05:30:30.280 <-A-- Response(0x81) fir: 1 fin: 1 con: 1 uns: 0 seq: 0x04 IIN(DeviceRestart, NeedTime)
05:30:30.280 g4v1, 2-Byte Count and Index, count: 20
05:30:30.280 [0] - flags: 0x81
05:30:30.280 [1] - flags: 0x81
05:30:30.280 [2] - flags: 0x81
05:30:30.280 [3] - flags: 0x81
05:30:30.280 [4] - flags: 0x81
05:30:30.280 [5] - flags: 0x81
05:30:30.280 [6] - flags: 0x81
05:30:30.280 [7] - flags: 0x81
05:30:30.280 [8] - flags: 0x81
05:30:30.280 [9] - flags: 0x81
05:30:30.280 [0] - flags: 0x41
05:30:30.280 [1] - flags: 0x41
05:30:30.280 [2] - flags: 0x41
05:30:30.280 [3] - flags: 0x41
05:30:30.280 [4] - flags: 0x41
05:30:30.280 [5] - flags: 0x41
05:30:30.280 [6] - flags: 0x41
05:30:30.280 [7] - flags: 0x41
05:30:30.280 [8] - flags: 0x41
05:30:30.280 [9] - flags: 0x41
05:30:30.280 --A-> Confirm(0x00) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x04
05:30:30.280 --T-> fir: 1 fin: 1 seq: 0
05:30:30.280 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 8 dest: 1024 src: 1
05:30:30.280 --P-> 05 64 08 C4 00 04 01 00 9A 19
05:30:30.280 C0 C4 00 F9 A1
05:30:30.281 [PLG] Verified 20 double-bit binary input point event(s)
05:30:30.281 step: 24
05:30:30.281 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x05
05:30:30.281 - g4v0, All Objects
05:30:30.281 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x05
05:30:30.281 g4v0, All Objects
05:30:30.281 --T-> fir: 1 fin: 1 seq: 0
05:30:30.281 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
05:30:30.281 --P-> 05 64 0B C4 00 04 01 00 CA 8A
05:30:30.281 C0 C5 01 04 00 06 1D AF
05:30:30.281 step: 25
05:30:30.281 - Read a single fragment response w/ sequence(0x05)
05:30:30.281 - Verify that the response is empty
05:30:30.281 - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported)
05:30:30.282 <-P-- 05 64 0A 44 01 00 00 04 67 88
05:30:30.282 C4 C5 81 90 00 40 BE
05:30:30.282 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024
05:30:30.282 <-T-- fir: 1 fin: 1 seq: 4
05:30:30.282 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x05 IIN(DeviceRestart, NeedTime)
05:30:30.282 Passed procedure: 8.22f