8.22m Double-bit Input Change with Relative Time, Qualifier 0x06 (as 8.14.2m) (revision 3.1r1, subset level 3)

Device under test: Step Function I/O dnp3 outstation

All results
05:30:31.902 Running procedure: 8.22m
05:30:31.903 This procedure is enabled because the following options:
05:30:31.903 - supports.doubleBitInput == true
05:30:31.903 - supports.doubleBitInputChangeEvents == true
05:30:31.903 - supports.doubleBitInputEventReads == true
05:30:31.903 step: 1
05:30:31.903 - Cycle power to the DUT
05:30:31.903 [PLG] Cycling power
05:30:31.905 step: 2
05:30:31.905 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
05:30:31.905 - g4v0, All Objects
05:30:31.905 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
05:30:31.905 g4v0, All Objects
05:30:31.905 --T-> fir: 1 fin: 1 seq: 0
05:30:31.905 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
05:30:31.905 --P-> 05 64 0B C4 00 04 01 00 CA 8A
05:30:31.905 C0 C0 01 04 00 06 03 00
05:30:31.905 steps: 3 to 4
05:30:31.905 - Read any number of valid responses beginning w/ sequence(0x00) and incrementing by 1 modulo 16
05:30:31.905 - If the response carries data, verify that it asks for an application layer confirmation.
05:30:31.905 - Note whether IIN1.4 (NEED_TIME) is set
05:30:31.905 - Confirm each response that asks for a confirmation
05:30:31.906 <-P-- 05 64 0A 44 01 00 00 04 67 88
05:30:31.906 C0 C0 81 90 00 9B 2C
05:30:31.906 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024
05:30:31.906 <-T-- fir: 1 fin: 1 seq: 0
05:30:31.906 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 IIN(DeviceRestart, NeedTime)
05:30:31.906 step: 5
05:30:31.906 - If IIN1.4 wasn't set in step 3's response, skip to step 19
05:30:31.906 step: 6
05:30:31.906 - Change double-bit binary inputs several times, one or more of them, to create events
05:30:31.906 - (Only if IIN1.4 was set in step 3's response)
05:30:31.906 [PLG] Updated DBBI 0: value=DETERMINED_ON, flags=81, timestamp=1793251831906 (UNSYNCHRONIZED_TIME)
05:30:31.906 [PLG] Updated DBBI 1: value=DETERMINED_ON, flags=81, timestamp=1793251831906 (UNSYNCHRONIZED_TIME)
05:30:31.906 [PLG] Updated DBBI 2: value=DETERMINED_ON, flags=81, timestamp=1793251831906 (UNSYNCHRONIZED_TIME)
05:30:31.906 [PLG] Updated DBBI 3: value=DETERMINED_ON, flags=81, timestamp=1793251831906 (UNSYNCHRONIZED_TIME)
05:30:31.906 [PLG] Updated DBBI 4: value=DETERMINED_ON, flags=81, timestamp=1793251831906 (UNSYNCHRONIZED_TIME)
05:30:31.907 [PLG] Updated DBBI 5: value=DETERMINED_ON, flags=81, timestamp=1793251831906 (UNSYNCHRONIZED_TIME)
05:30:31.907 [PLG] Updated DBBI 6: value=DETERMINED_ON, flags=81, timestamp=1793251831907 (UNSYNCHRONIZED_TIME)
05:30:31.907 [PLG] Updated DBBI 7: value=DETERMINED_ON, flags=81, timestamp=1793251831907 (UNSYNCHRONIZED_TIME)
05:30:31.907 [PLG] Updated DBBI 8: value=DETERMINED_ON, flags=81, timestamp=1793251831907 (UNSYNCHRONIZED_TIME)
05:30:31.907 [PLG] Updated DBBI 9: value=DETERMINED_ON, flags=81, timestamp=1793251831907 (UNSYNCHRONIZED_TIME)
05:30:31.907 The plugin reports the DUT's clock unsynchronized
05:30:31.907 step: 7
05:30:31.907 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
05:30:31.907 - g4v3, All Objects
05:30:31.907 - (Only if IIN1.4 was set in step 3's response)
05:30:31.907 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
05:30:31.907 g4v3, All Objects
05:30:31.907 --T-> fir: 1 fin: 1 seq: 0
05:30:31.907 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
05:30:31.907 --P-> 05 64 0B C4 00 04 01 00 CA 8A
05:30:31.907 C0 C1 01 04 03 06 AE 93
05:30:31.907 steps: 8 to 14
05:30:31.907 - Read a single fragment response w/ sequence(0x01)
05:30:31.907 - Verify that the response holds every Double-bit Binary event generated
05:30:31.907 - If the events carry timestamps, verify that the gaps between them match the gaps between when the events were generated, to the Device Profile's resolution
05:30:31.907 - Verify that an application layer confirmation is requested.
05:30:31.907 - Verify that the events are reported as 3.1r1's rules for event reporting require, for a read of g4v3, by the state of the DUT's clock when it recorded them, where the procedure or the plugin knows it
05:30:31.907 - Verify that the flags behave as the note on flags in Section 2 requires (Note 5 in 2.7, Note 6 in 3.1r1).
05:30:31.907 - Confirm each response that asks for a confirmation
05:30:31.907 - (Only if IIN1.4 was set in step 3's response)
05:30:31.908 <-P-- 05 64 4B 44 01 00 00 04 FD 93
05:30:31.908 C1 E1 81 90 00 33 02 07 01 62 70 23 86 A1 01 04 A9 7C
05:30:31.908 03 28 0A 00 00 00 81 00 00 01 00 81 00 00 02 00 AC 42
05:30:31.908 81 00 00 03 00 81 00 00 04 00 81 00 00 05 00 81 9B 00
05:30:31.908 00 00 06 00 81 01 00 07 00 81 01 00 08 00 81 01 9E 6F
05:30:31.908 00 09 00 81 01 00 E1 6E
05:30:31.908 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 75 dest: 1 src: 1024
05:30:31.908 <-T-- fir: 1 fin: 1 seq: 1
05:30:31.908 <-A-- Response(0x81) fir: 1 fin: 1 con: 1 uns: 0 seq: 0x01 IIN(DeviceRestart, NeedTime)
05:30:31.908 g51v2, 1-Byte Count, count: 1
05:30:31.908 time: 1793251831906
05:30:31.908 g4v3, 2-Byte Count and Index, count: 10
05:30:31.908 [0] - flags: 0x81 cto: 0
05:30:31.908 [1] - flags: 0x81 cto: 0
05:30:31.908 [2] - flags: 0x81 cto: 0
05:30:31.908 [3] - flags: 0x81 cto: 0
05:30:31.908 [4] - flags: 0x81 cto: 0
05:30:31.908 [5] - flags: 0x81 cto: 0
05:30:31.908 [6] - flags: 0x81 cto: 1
05:30:31.908 [7] - flags: 0x81 cto: 1
05:30:31.908 [8] - flags: 0x81 cto: 1
05:30:31.908 [9] - flags: 0x81 cto: 1
05:30:31.908 --A-> Confirm(0x00) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
05:30:31.908 --T-> fir: 1 fin: 1 seq: 0
05:30:31.908 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 8 dest: 1024 src: 1
05:30:31.908 --P-> 05 64 08 C4 00 04 01 00 9A 19
05:30:31.908 C0 C1 00 7D 3D
05:30:31.908 [PLG] Verified 10 double-bit binary input point event(s)
05:30:31.909 step: 15
05:30:31.909 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02
05:30:31.909 - g4v0, All Objects
05:30:31.909 - (Only if IIN1.4 was set in step 3's response)
05:30:31.909 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02
05:30:31.909 g4v0, All Objects
05:30:31.909 --T-> fir: 1 fin: 1 seq: 0
05:30:31.909 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
05:30:31.909 --P-> 05 64 0B C4 00 04 01 00 CA 8A
05:30:31.909 C0 C2 01 04 00 06 0F 46
05:30:31.909 step: 16
05:30:31.909 - Read a single fragment response w/ sequence(0x02)
05:30:31.909 - Verify that the response is empty
05:30:31.909 - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported)
05:30:31.909 - (Only if IIN1.4 was set in step 3's response)
05:30:31.909 <-P-- 05 64 0A 44 01 00 00 04 67 88
05:30:31.909 C2 C2 81 90 00 3E A2
05:30:31.909 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024
05:30:31.909 <-T-- fir: 1 fin: 1 seq: 2
05:30:31.909 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 IIN(DeviceRestart, NeedTime)
05:30:31.909 step: 17
05:30:31.909 - Write the current time + 5 ms w/ sequence(0x03)
05:30:31.909 - (Only if IIN1.4 was set in step 3's response, and the master can write the time)
05:30:31.909 --A-> Write(0x02) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03
05:30:31.909 g50v1, 1-Byte Count, count: 1
05:30:31.909 time: 1793251831914
05:30:31.909 --T-> fir: 1 fin: 1 seq: 0
05:30:31.909 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 18 dest: 1024 src: 1
05:30:31.909 --P-> 05 64 12 C4 00 04 01 00 30 DD
05:30:31.909 C0 C3 02 32 01 07 01 6A 70 23 86 A1 01 D9 A4
05:30:31.909 step: 18
05:30:31.909 - Read a single fragment response w/ sequence(0x03)
05:30:31.909 - Verify that the response is empty
05:30:31.909 - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported)
05:30:31.909 - Verify that the IIN field does not contain bits IIN(NeedTime)
05:30:31.909 - (Only if IIN1.4 was set in step 3's response, and the master can write the time)
05:30:31.909 <-P-- 05 64 0A 44 01 00 00 04 67 88
05:30:31.909 C3 C3 81 80 00 F8 9C
05:30:31.909 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024
05:30:31.909 <-T-- fir: 1 fin: 1 seq: 3
05:30:31.909 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03 IIN(DeviceRestart)
05:30:31.909 step: 19
05:30:31.909 - Change double-bit binary inputs several times, one or more of them, to create events
05:30:31.909 [PLG] Updated DBBI 0: value=DETERMINED_OFF, flags=41, timestamp=1793251831914 (SYNCHRONIZED_TIME)
05:30:31.909 [PLG] Updated DBBI 1: value=DETERMINED_OFF, flags=41, timestamp=1793251831914 (SYNCHRONIZED_TIME)
05:30:31.910 [PLG] Updated DBBI 2: value=DETERMINED_OFF, flags=41, timestamp=1793251831914 (SYNCHRONIZED_TIME)
05:30:31.910 [PLG] Updated DBBI 3: value=DETERMINED_OFF, flags=41, timestamp=1793251831914 (SYNCHRONIZED_TIME)
05:30:31.910 [PLG] Updated DBBI 4: value=DETERMINED_OFF, flags=41, timestamp=1793251831914 (SYNCHRONIZED_TIME)
05:30:31.910 [PLG] Updated DBBI 5: value=DETERMINED_OFF, flags=41, timestamp=1793251831914 (SYNCHRONIZED_TIME)
05:30:31.910 [PLG] Updated DBBI 6: value=DETERMINED_OFF, flags=41, timestamp=1793251831914 (SYNCHRONIZED_TIME)
05:30:31.910 [PLG] Updated DBBI 7: value=DETERMINED_OFF, flags=41, timestamp=1793251831914 (SYNCHRONIZED_TIME)
05:30:31.910 [PLG] Updated DBBI 8: value=DETERMINED_OFF, flags=41, timestamp=1793251831914 (SYNCHRONIZED_TIME)
05:30:31.910 [PLG] Updated DBBI 9: value=DETERMINED_OFF, flags=41, timestamp=1793251831914 (SYNCHRONIZED_TIME)
05:30:31.910 The plugin reports the DUT's clock synchronized
05:30:31.910 step: 20
05:30:31.910 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x04
05:30:31.910 - g4v3, All Objects
05:30:31.910 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x04
05:30:31.910 g4v3, All Objects
05:30:31.910 --T-> fir: 1 fin: 1 seq: 0
05:30:31.910 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
05:30:31.910 --P-> 05 64 0B C4 00 04 01 00 CA 8A
05:30:31.910 C0 C4 01 04 03 06 B0 3C
05:30:31.910 steps: 21 to 28
05:30:31.910 - Read a single fragment response w/ sequence(0x04)
05:30:31.910 - Verify that the response holds every Double-bit Binary event generated
05:30:31.910 - If the events carry timestamps, verify that the gaps between them match the gaps between when the events were generated, to the Device Profile's resolution
05:30:31.910 - Verify that an application layer confirmation is requested.
05:30:31.910 - Verify that the events are reported as 3.1r1's rules for event reporting require, for a read of g4v3, by the state of the DUT's clock when it recorded them, where the procedure or the plugin knows it
05:30:31.910 - Verify that the flags behave as the note on flags in Section 2 requires (Note 5 in 2.7, Note 6 in 3.1r1).
05:30:31.910 - Confirm each response that asks for a confirmation
05:30:31.910 <-P-- 05 64 4B 44 01 00 00 04 FD 93
05:30:31.910 C4 E4 81 80 00 33 01 07 01 6A 70 23 86 A1 01 04 04 7E
05:30:31.910 03 28 0A 00 00 00 41 00 00 01 00 41 00 00 02 00 50 BE
05:30:31.910 41 00 00 03 00 41 00 00 04 00 41 00 00 05 00 41 D8 91
05:30:31.910 00 00 06 00 41 00 00 07 00 41 00 00 08 00 41 00 21 C6
05:30:31.910 00 09 00 41 00 00 67 1C
05:30:31.910 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 75 dest: 1 src: 1024
05:30:31.910 <-T-- fir: 1 fin: 1 seq: 4
05:30:31.910 <-A-- Response(0x81) fir: 1 fin: 1 con: 1 uns: 0 seq: 0x04 IIN(DeviceRestart)
05:30:31.910 g51v1, 1-Byte Count, count: 1
05:30:31.910 time: 1793251831914
05:30:31.910 g4v3, 2-Byte Count and Index, count: 10
05:30:31.910 [0] - flags: 0x41 cto: 0
05:30:31.910 [1] - flags: 0x41 cto: 0
05:30:31.910 [2] - flags: 0x41 cto: 0
05:30:31.910 [3] - flags: 0x41 cto: 0
05:30:31.910 [4] - flags: 0x41 cto: 0
05:30:31.910 [5] - flags: 0x41 cto: 0
05:30:31.910 [6] - flags: 0x41 cto: 0
05:30:31.910 [7] - flags: 0x41 cto: 0
05:30:31.910 [8] - flags: 0x41 cto: 0
05:30:31.910 [9] - flags: 0x41 cto: 0
05:30:31.910 --A-> Confirm(0x00) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x04
05:30:31.910 --T-> fir: 1 fin: 1 seq: 0
05:30:31.910 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 8 dest: 1024 src: 1
05:30:31.910 --P-> 05 64 08 C4 00 04 01 00 9A 19
05:30:31.910 C0 C4 00 F9 A1
05:30:31.911 [PLG] Verified 10 double-bit binary input point event(s)
05:30:31.911 step: 29
05:30:31.911 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x05
05:30:31.911 - g4v0, All Objects
05:30:31.911 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x05
05:30:31.911 g4v0, All Objects
05:30:31.911 --T-> fir: 1 fin: 1 seq: 0
05:30:31.911 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
05:30:31.911 --P-> 05 64 0B C4 00 04 01 00 CA 8A
05:30:31.911 C0 C5 01 04 00 06 1D AF
05:30:31.911 step: 30
05:30:31.911 - Read a single fragment response w/ sequence(0x05)
05:30:31.911 - Verify that the response is empty
05:30:31.911 - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported)
05:30:31.911 <-P-- 05 64 0A 44 01 00 00 04 67 88
05:30:31.911 C5 C5 81 80 00 6E 42
05:30:31.911 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024
05:30:31.911 <-T-- fir: 1 fin: 1 seq: 5
05:30:31.911 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x05 IIN(DeviceRestart)
05:30:31.911 step: 31
05:30:31.911 - If the DUT doesn't report events with relative time, or never sets IIN1.4, skip the rest of this test
05:30:31.911 step: 32
05:30:31.911 - Wait for 5000 milliseconds
05:30:31.911 - (Only if the DUT reports events with relative time and asks for the time)
05:30:36.911 step: 33
05:30:36.911 - Wait for 5000 milliseconds
05:30:36.911 - (Only if the DUT reports events with relative time and asks for the time)
05:30:41.911 step: 34
05:30:41.911 - Change double-bit binary inputs several times, one or more of them, to create events
05:30:41.911 - (Only if the DUT reports events with relative time and asks for the time)
05:30:41.912 [PLG] Updated DBBI 0: value=DETERMINED_ON, flags=81, timestamp=1793251841916 (UNSYNCHRONIZED_TIME)
05:30:41.912 [PLG] Updated DBBI 1: value=DETERMINED_ON, flags=81, timestamp=1793251841916 (UNSYNCHRONIZED_TIME)
05:30:41.912 [PLG] Updated DBBI 2: value=DETERMINED_ON, flags=81, timestamp=1793251841916 (UNSYNCHRONIZED_TIME)
05:30:41.912 [PLG] Updated DBBI 3: value=DETERMINED_ON, flags=81, timestamp=1793251841916 (UNSYNCHRONIZED_TIME)
05:30:41.912 [PLG] Updated DBBI 4: value=DETERMINED_ON, flags=81, timestamp=1793251841916 (UNSYNCHRONIZED_TIME)
05:30:41.912 [PLG] Updated DBBI 5: value=DETERMINED_ON, flags=81, timestamp=1793251841916 (UNSYNCHRONIZED_TIME)
05:30:41.912 [PLG] Updated DBBI 6: value=DETERMINED_ON, flags=81, timestamp=1793251841916 (UNSYNCHRONIZED_TIME)
05:30:41.912 [PLG] Updated DBBI 7: value=DETERMINED_ON, flags=81, timestamp=1793251841916 (UNSYNCHRONIZED_TIME)
05:30:41.912 [PLG] Updated DBBI 8: value=DETERMINED_ON, flags=81, timestamp=1793251841916 (UNSYNCHRONIZED_TIME)
05:30:41.912 [PLG] Updated DBBI 9: value=DETERMINED_ON, flags=81, timestamp=1793251841916 (UNSYNCHRONIZED_TIME)
05:30:41.912 The plugin reports the DUT's clock unsynchronized
05:30:41.912 step: 35
05:30:41.912 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x06
05:30:41.912 - g4v3, All Objects
05:30:41.912 - (Only if the DUT reports events with relative time and asks for the time)
05:30:41.912 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x06
05:30:41.912 g4v3, All Objects
05:30:41.912 --T-> fir: 1 fin: 1 seq: 0
05:30:41.912 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
05:30:41.912 --P-> 05 64 0B C4 00 04 01 00 CA 8A
05:30:41.912 C0 C6 01 04 03 06 BC 7A
05:30:41.912 steps: 36 to 38
05:30:41.912 - Read a single fragment response w/ sequence(0x06)
05:30:41.912 - Verify that the response holds every Double-bit Binary event generated
05:30:41.912 - If the events carry timestamps, verify that the gaps between them match the gaps between when the events were generated, to the Device Profile's resolution
05:30:41.912 - Verify that an application layer confirmation is requested.
05:30:41.912 - Verify that the events are reported as 3.1r1's rules for event reporting require, for a read of g4v3, by the state of the DUT's clock when it recorded them, where the procedure or the plugin knows it
05:30:41.912 - Verify that the flags behave as the note on flags in Section 2 requires (Note 5 in 2.7, Note 6 in 3.1r1).
05:30:41.912 - Confirm each response that asks for a confirmation
05:30:41.912 - (Only if the DUT reports events with relative time and asks for the time)
05:30:41.913 <-P-- 05 64 4B 44 01 00 00 04 FD 93
05:30:41.913 C6 E6 81 90 00 33 02 07 01 7C 97 23 86 A1 01 04 14 2A
05:30:41.913 03 28 0A 00 00 00 81 00 00 01 00 81 00 00 02 00 AC 42
05:30:41.913 81 00 00 03 00 81 00 00 04 00 81 00 00 05 00 81 9B 00
05:30:41.913 00 00 06 00 81 00 00 07 00 81 00 00 08 00 81 00 A9 FA
05:30:41.913 00 09 00 81 00 00 AF C5
05:30:41.913 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 75 dest: 1 src: 1024
05:30:41.913 <-T-- fir: 1 fin: 1 seq: 6
05:30:41.913 <-A-- Response(0x81) fir: 1 fin: 1 con: 1 uns: 0 seq: 0x06 IIN(DeviceRestart, NeedTime)
05:30:41.913 g51v2, 1-Byte Count, count: 1
05:30:41.913 time: 1793251841916
05:30:41.913 g4v3, 2-Byte Count and Index, count: 10
05:30:41.913 [0] - flags: 0x81 cto: 0
05:30:41.913 [1] - flags: 0x81 cto: 0
05:30:41.913 [2] - flags: 0x81 cto: 0
05:30:41.913 [3] - flags: 0x81 cto: 0
05:30:41.913 [4] - flags: 0x81 cto: 0
05:30:41.913 [5] - flags: 0x81 cto: 0
05:30:41.913 [6] - flags: 0x81 cto: 0
05:30:41.913 [7] - flags: 0x81 cto: 0
05:30:41.913 [8] - flags: 0x81 cto: 0
05:30:41.913 [9] - flags: 0x81 cto: 0
05:30:41.913 --A-> Confirm(0x00) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x06
05:30:41.913 --T-> fir: 1 fin: 1 seq: 0
05:30:41.913 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 8 dest: 1024 src: 1
05:30:41.913 --P-> 05 64 08 C4 00 04 01 00 9A 19
05:30:41.913 C0 C6 00 1C BA
05:30:41.914 [PLG] Verified 10 double-bit binary input point event(s)
05:30:41.914 Passed procedure: 8.22m