| 05:31:54.286 | Running procedure: 8.23.2.2.2 | |
| 05:31:54.287 | This procedure is enabled because the following options: | |
| 05:31:54.287 | - supports.binaryOutput.status == true | |
| 05:31:54.287 | step: 1 | |
| 05:31:54.287 | - Before step 1, read all of the DUT's binary output status points to find their indices | |
| 05:31:54.287 | - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 | |
| 05:31:54.287 | - g10v0, All Objects | |
| 05:31:54.287 | - Read any number of valid responses beginning w/ sequence(0x00) and incrementing by 1 modulo 16 | |
| 05:31:54.287 | - Note the indices of the binary output status points reported | |
| 05:31:54.287 | - Confirm each response that asks for a confirmation | |
| 05:31:54.287 | - Read g10v0 with a 8-bit (qualifier 0x00) start/stop range, the first and the next of the first three consecutive points, else the first point alone, w/ sequence(0x01) | |
| 05:31:54.287 | --A-> | Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 |
| 05:31:54.287 | g10v0, All Objects | |
| 05:31:54.287 | --T-> | fir: 1 fin: 1 seq: 0 |
| 05:31:54.287 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1 |
| 05:31:54.288 | --P-> | 05 64 0B C4 00 04 01 00 CA 8A |
| 05:31:54.288 | C0 C0 01 0A 00 06 53 98 | |
| 05:31:54.288 | <-P-- | 05 64 25 44 01 00 00 04 07 3D |
| 05:31:54.288 | C0 C0 81 90 00 0A 02 01 00 00 13 00 01 01 01 01 3A 43 | |
| 05:31:54.288 | 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 BB C3 | |
| 05:31:54.288 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 37 dest: 1 src: 1024 |
| 05:31:54.288 | <-T-- | fir: 1 fin: 1 seq: 0 |
| 05:31:54.289 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 IIN(DeviceRestart, NeedTime) |
| 05:31:54.289 | g10v2, 2-Byte Start/Stop, start: 0 stop: 19 | |
| 05:31:54.289 | [0] - flags: 0x01 | |
| 05:31:54.289 | [1] - flags: 0x01 | |
| 05:31:54.289 | [2] - flags: 0x01 | |
| 05:31:54.289 | [3] - flags: 0x01 | |
| 05:31:54.289 | [4] - flags: 0x01 | |
| 05:31:54.289 | [5] - flags: 0x01 | |
| 05:31:54.289 | [6] - flags: 0x01 | |
| 05:31:54.289 | [7] - flags: 0x01 | |
| 05:31:54.289 | [8] - flags: 0x01 | |
| 05:31:54.289 | [9] - flags: 0x01 | |
| 05:31:54.289 | [10] - flags: 0x01 | |
| 05:31:54.289 | [11] - flags: 0x01 | |
| 05:31:54.289 | [12] - flags: 0x01 | |
| 05:31:54.289 | [13] - flags: 0x01 | |
| 05:31:54.289 | [14] - flags: 0x01 | |
| 05:31:54.289 | [15] - flags: 0x01 | |
| 05:31:54.289 | [16] - flags: 0x01 | |
| 05:31:54.289 | [17] - flags: 0x01 | |
| 05:31:54.289 | [18] - flags: 0x01 | |
| 05:31:54.289 | [19] - flags: 0x01 | |
| 05:31:54.289 | --A-> | Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 |
| 05:31:54.289 | g10v0, 1-Byte Start/Stop, start: 0 stop: 1 | |
| 05:31:54.289 | --T-> | fir: 1 fin: 1 seq: 0 |
| 05:31:54.289 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 13 dest: 1024 src: 1 |
| 05:31:54.289 | --P-> | 05 64 0D C4 00 04 01 00 13 E1 |
| 05:31:54.289 | C0 C1 01 0A 00 00 00 01 60 8A | |
| 05:31:54.289 | steps: 2 to 4 | |
| 05:31:54.289 | - Read any number of valid responses beginning w/ sequence(0x01) and incrementing by 1 modulo 16 | |
| 05:31:54.289 | - Verify that the response uses an 8-bit (0x00) or a 16-bit (0x01) start/stop range, for the points requested | |
| 05:31:54.289 | - Confirm each response that asks for a confirmation | |
| 05:31:54.290 | <-P-- | 05 64 13 44 01 00 00 04 9D DF |
| 05:31:54.290 | C1 C1 81 90 00 0A 02 01 00 00 01 00 01 01 87 80 | |
| 05:31:54.290 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 19 dest: 1 src: 1024 |
| 05:31:54.290 | <-T-- | fir: 1 fin: 1 seq: 1 |
| 05:31:54.290 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 IIN(DeviceRestart, NeedTime) |
| 05:31:54.290 | g10v2, 2-Byte Start/Stop, start: 0 stop: 1 | |
| 05:31:54.290 | [0] - flags: 0x01 | |
| 05:31:54.290 | [1] - flags: 0x01 | |
| 05:31:54.290 | step: 5 | |
| 05:31:54.290 | - Read g10v0 with a 16-bit (qualifier 0x01) start/stop range, the first and the next of the first three consecutive points, else the first point alone, w/ sequence(0x02) | |
| 05:31:54.290 | --A-> | Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 |
| 05:31:54.290 | g10v0, 2-Byte Start/Stop, start: 0 stop: 1 | |
| 05:31:54.290 | --T-> | fir: 1 fin: 1 seq: 0 |
| 05:31:54.290 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 15 dest: 1024 src: 1 |
| 05:31:54.290 | --P-> | 05 64 0F C4 00 04 01 00 A4 C7 |
| 05:31:54.290 | C0 C2 01 0A 00 01 00 00 01 00 7B 4B | |
| 05:31:54.290 | steps: 6 to 8 | |
| 05:31:54.290 | - Read any number of valid responses beginning w/ sequence(0x02) and incrementing by 1 modulo 16 | |
| 05:31:54.290 | - Verify that the response uses an 8-bit (0x00) or a 16-bit (0x01) start/stop range, for the points requested | |
| 05:31:54.290 | - Confirm each response that asks for a confirmation | |
| 05:31:54.290 | <-P-- | 05 64 13 44 01 00 00 04 9D DF |
| 05:31:54.290 | C2 C2 81 90 00 0A 02 01 00 00 01 00 01 01 DA 22 | |
| 05:31:54.290 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 19 dest: 1 src: 1024 |
| 05:31:54.290 | <-T-- | fir: 1 fin: 1 seq: 2 |
| 05:31:54.290 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 IIN(DeviceRestart, NeedTime) |
| 05:31:54.290 | g10v2, 2-Byte Start/Stop, start: 0 stop: 1 | |
| 05:31:54.290 | [0] - flags: 0x01 | |
| 05:31:54.290 | [1] - flags: 0x01 | |
| 05:31:54.290 | Passed procedure: 8.23.2.2.2 |