| 05:31:56.329 | Running procedure: 8.23.2.5.2 | |
| 05:31:56.330 | This procedure is enabled because the following options: | |
| 05:31:56.330 | - supports.analogInput == true | |
| 05:31:56.330 | - supports.analogInputReads == true | |
| 05:31:56.330 | - supports.rangeReads == true | |
| 05:31:56.330 | step: 1 | |
| 05:31:56.330 | - Before step 1, read all of the DUT's analog inputs to find their indices | |
| 05:31:56.330 | - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 | |
| 05:31:56.330 | - g30v0, All Objects | |
| 05:31:56.330 | - Read any number of valid responses beginning w/ sequence(0x00) and incrementing by 1 modulo 16 | |
| 05:31:56.330 | - Note the indices of the analog inputs reported | |
| 05:31:56.330 | - Confirm each response that asks for a confirmation | |
| 05:31:56.330 | - Read g30v0 with a 8-bit (qualifier 0x00) start/stop range, the first and the next of the first three consecutive points, else the first point alone, w/ sequence(0x01) | |
| 05:31:56.331 | --A-> | Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 |
| 05:31:56.331 | g30v0, All Objects | |
| 05:31:56.331 | --T-> | fir: 1 fin: 1 seq: 0 |
| 05:31:56.331 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1 |
| 05:31:56.331 | --P-> | 05 64 0B C4 00 04 01 00 CA 8A |
| 05:31:56.331 | C0 C0 01 1E 00 06 4A 28 | |
| 05:31:56.331 | <-P-- | 05 64 2F 44 01 00 00 04 6C 81 |
| 05:31:56.331 | C0 C0 81 90 00 1E 02 01 00 00 09 00 01 00 00 01 C7 4A | |
| 05:31:56.331 | 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 DB 49 | |
| 05:31:56.331 | 00 01 00 00 01 00 00 01 00 00 61 8D | |
| 05:31:56.331 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 47 dest: 1 src: 1024 |
| 05:31:56.331 | <-T-- | fir: 1 fin: 1 seq: 0 |
| 05:31:56.331 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 IIN(DeviceRestart, NeedTime) |
| 05:31:56.331 | g30v2, 2-Byte Start/Stop, start: 0 stop: 9 | |
| 05:31:56.331 | [0] - flags: 0x01 value: 0 | |
| 05:31:56.331 | [1] - flags: 0x01 value: 0 | |
| 05:31:56.331 | [2] - flags: 0x01 value: 0 | |
| 05:31:56.331 | [3] - flags: 0x01 value: 0 | |
| 05:31:56.331 | [4] - flags: 0x01 value: 0 | |
| 05:31:56.331 | [5] - flags: 0x01 value: 0 | |
| 05:31:56.331 | [6] - flags: 0x01 value: 0 | |
| 05:31:56.331 | [7] - flags: 0x01 value: 0 | |
| 05:31:56.331 | [8] - flags: 0x01 value: 0 | |
| 05:31:56.331 | [9] - flags: 0x01 value: 0 | |
| 05:31:56.332 | --A-> | Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 |
| 05:31:56.332 | g30v0, 1-Byte Start/Stop, start: 0 stop: 1 | |
| 05:31:56.332 | --T-> | fir: 1 fin: 1 seq: 0 |
| 05:31:56.332 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 13 dest: 1024 src: 1 |
| 05:31:56.332 | --P-> | 05 64 0D C4 00 04 01 00 13 E1 |
| 05:31:56.332 | C0 C1 01 1E 00 00 00 01 EA AC | |
| 05:31:56.332 | steps: 2 to 4 | |
| 05:31:56.332 | - Read any number of valid responses beginning w/ sequence(0x01) and incrementing by 1 modulo 16 | |
| 05:31:56.332 | - Verify that the response uses an 8-bit (0x00) or a 16-bit (0x01) start/stop range, for the points requested | |
| 05:31:56.332 | - Confirm each response that asks for a confirmation | |
| 05:31:56.332 | <-P-- | 05 64 17 44 01 00 00 04 F3 92 |
| 05:31:56.332 | C1 C1 81 90 00 1E 02 01 00 00 01 00 01 00 00 01 8F F3 | |
| 05:31:56.332 | 00 00 FF FF | |
| 05:31:56.332 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 23 dest: 1 src: 1024 |
| 05:31:56.332 | <-T-- | fir: 1 fin: 1 seq: 1 |
| 05:31:56.332 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 IIN(DeviceRestart, NeedTime) |
| 05:31:56.332 | g30v2, 2-Byte Start/Stop, start: 0 stop: 1 | |
| 05:31:56.332 | [0] - flags: 0x01 value: 0 | |
| 05:31:56.332 | [1] - flags: 0x01 value: 0 | |
| 05:31:56.333 | step: 5 | |
| 05:31:56.333 | - Read g30v0 with a 16-bit (qualifier 0x01) start/stop range, the first and the next of the first three consecutive points, else the first point alone, w/ sequence(0x02) | |
| 05:31:56.333 | --A-> | Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 |
| 05:31:56.333 | g30v0, 2-Byte Start/Stop, start: 0 stop: 1 | |
| 05:31:56.333 | --T-> | fir: 1 fin: 1 seq: 0 |
| 05:31:56.333 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 15 dest: 1024 src: 1 |
| 05:31:56.333 | --P-> | 05 64 0F C4 00 04 01 00 A4 C7 |
| 05:31:56.333 | C0 C2 01 1E 00 01 00 00 01 00 4E B8 | |
| 05:31:56.333 | steps: 6 to 8 | |
| 05:31:56.333 | - Read any number of valid responses beginning w/ sequence(0x02) and incrementing by 1 modulo 16 | |
| 05:31:56.333 | - Verify that the response uses an 8-bit (0x00) or a 16-bit (0x01) start/stop range, for the points requested | |
| 05:31:56.333 | - Confirm each response that asks for a confirmation | |
| 05:31:56.333 | <-P-- | 05 64 17 44 01 00 00 04 F3 92 |
| 05:31:56.333 | C2 C2 81 90 00 1E 02 01 00 00 01 00 01 00 00 01 33 97 | |
| 05:31:56.333 | 00 00 FF FF | |
| 05:31:56.333 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 23 dest: 1 src: 1024 |
| 05:31:56.333 | <-T-- | fir: 1 fin: 1 seq: 2 |
| 05:31:56.333 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 IIN(DeviceRestart, NeedTime) |
| 05:31:56.333 | g30v2, 2-Byte Start/Stop, start: 0 stop: 1 | |
| 05:31:56.333 | [0] - flags: 0x01 value: 0 | |
| 05:31:56.333 | [1] - flags: 0x01 value: 0 | |
| 05:31:56.333 | Passed procedure: 8.23.2.5.2 |