| 05:31:57.004 | Running procedure: 8.23.2.6.2 | |
| 05:31:57.005 | This procedure is enabled because the following options: | |
| 05:31:57.005 | - supports.analogOutput.status == true | |
| 05:31:57.005 | - supports.rangeReads == true | |
| 05:31:57.006 | step: 1 | |
| 05:31:57.006 | - Before step 1, read all of the DUT's analog output status points to find their indices | |
| 05:31:57.006 | - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 | |
| 05:31:57.006 | - g40v0, All Objects | |
| 05:31:57.006 | - Read any number of valid responses beginning w/ sequence(0x00) and incrementing by 1 modulo 16 | |
| 05:31:57.006 | - Note the indices of the analog output status points reported | |
| 05:31:57.006 | - Confirm each response that asks for a confirmation | |
| 05:31:57.006 | - Read g40v0 with a 8-bit (qualifier 0x00) start/stop range, the first and the next of the first three consecutive points, else the first point alone, w/ sequence(0x01) | |
| 05:31:57.006 | --A-> | Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 |
| 05:31:57.006 | g40v0, All Objects | |
| 05:31:57.006 | --T-> | fir: 1 fin: 1 seq: 0 |
| 05:31:57.006 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1 |
| 05:31:57.006 | --P-> | 05 64 0B C4 00 04 01 00 CA 8A |
| 05:31:57.006 | C0 C0 01 28 00 06 A8 4B | |
| 05:31:57.007 | <-P-- | 05 64 4D 44 01 00 00 04 24 F8 |
| 05:31:57.007 | C0 C0 81 90 00 28 02 01 00 00 13 00 01 00 00 01 E2 97 | |
| 05:31:57.007 | 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 DB 49 | |
| 05:31:57.007 | 00 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 9E 0F | |
| 05:31:57.007 | 01 00 00 01 00 00 01 00 00 01 00 00 01 00 00 01 FE 85 | |
| 05:31:57.007 | 00 00 01 00 00 01 00 00 A0 53 | |
| 05:31:57.007 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 77 dest: 1 src: 1024 |
| 05:31:57.007 | <-T-- | fir: 1 fin: 1 seq: 0 |
| 05:31:57.007 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 IIN(DeviceRestart, NeedTime) |
| 05:31:57.007 | g40v2, 2-Byte Start/Stop, start: 0 stop: 19 | |
| 05:31:57.007 | [0] - flags: 0x01 value: 0 | |
| 05:31:57.007 | [1] - flags: 0x01 value: 0 | |
| 05:31:57.007 | [2] - flags: 0x01 value: 0 | |
| 05:31:57.007 | [3] - flags: 0x01 value: 0 | |
| 05:31:57.007 | [4] - flags: 0x01 value: 0 | |
| 05:31:57.007 | [5] - flags: 0x01 value: 0 | |
| 05:31:57.007 | [6] - flags: 0x01 value: 0 | |
| 05:31:57.007 | [7] - flags: 0x01 value: 0 | |
| 05:31:57.007 | [8] - flags: 0x01 value: 0 | |
| 05:31:57.007 | [9] - flags: 0x01 value: 0 | |
| 05:31:57.007 | [10] - flags: 0x01 value: 0 | |
| 05:31:57.007 | [11] - flags: 0x01 value: 0 | |
| 05:31:57.007 | [12] - flags: 0x01 value: 0 | |
| 05:31:57.007 | [13] - flags: 0x01 value: 0 | |
| 05:31:57.007 | [14] - flags: 0x01 value: 0 | |
| 05:31:57.007 | [15] - flags: 0x01 value: 0 | |
| 05:31:57.007 | [16] - flags: 0x01 value: 0 | |
| 05:31:57.007 | [17] - flags: 0x01 value: 0 | |
| 05:31:57.007 | [18] - flags: 0x01 value: 0 | |
| 05:31:57.007 | [19] - flags: 0x01 value: 0 | |
| 05:31:57.007 | --A-> | Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 |
| 05:31:57.007 | g40v0, 1-Byte Start/Stop, start: 0 stop: 1 | |
| 05:31:57.007 | --T-> | fir: 1 fin: 1 seq: 0 |
| 05:31:57.007 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 13 dest: 1024 src: 1 |
| 05:31:57.007 | --P-> | 05 64 0D C4 00 04 01 00 13 E1 |
| 05:31:57.007 | C0 C1 01 28 00 00 00 01 31 D4 | |
| 05:31:57.008 | steps: 2 to 4 | |
| 05:31:57.008 | - Read any number of valid responses beginning w/ sequence(0x01) and incrementing by 1 modulo 16 | |
| 05:31:57.008 | - Verify that the response uses an 8-bit (0x00) or a 16-bit (0x01) start/stop range, for the points requested | |
| 05:31:57.008 | - Confirm each response that asks for a confirmation | |
| 05:31:57.008 | <-P-- | 05 64 17 44 01 00 00 04 F3 92 |
| 05:31:57.008 | C1 C1 81 90 00 28 02 01 00 00 01 00 01 00 00 01 00 EA | |
| 05:31:57.008 | 00 00 FF FF | |
| 05:31:57.008 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 23 dest: 1 src: 1024 |
| 05:31:57.008 | <-T-- | fir: 1 fin: 1 seq: 1 |
| 05:31:57.008 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 IIN(DeviceRestart, NeedTime) |
| 05:31:57.008 | g40v2, 2-Byte Start/Stop, start: 0 stop: 1 | |
| 05:31:57.008 | [0] - flags: 0x01 value: 0 | |
| 05:31:57.008 | [1] - flags: 0x01 value: 0 | |
| 05:31:57.008 | step: 5 | |
| 05:31:57.008 | - Read g40v0 with a 16-bit (qualifier 0x01) start/stop range, the first and the next of the first three consecutive points, else the first point alone, w/ sequence(0x02) | |
| 05:31:57.008 | --A-> | Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 |
| 05:31:57.008 | g40v0, 2-Byte Start/Stop, start: 0 stop: 1 | |
| 05:31:57.008 | --T-> | fir: 1 fin: 1 seq: 0 |
| 05:31:57.008 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 15 dest: 1024 src: 1 |
| 05:31:57.008 | --P-> | 05 64 0F C4 00 04 01 00 A4 C7 |
| 05:31:57.008 | C0 C2 01 28 00 01 00 00 01 00 4E 3F | |
| 05:31:57.008 | steps: 6 to 8 | |
| 05:31:57.008 | - Read any number of valid responses beginning w/ sequence(0x02) and incrementing by 1 modulo 16 | |
| 05:31:57.008 | - Verify that the response uses an 8-bit (0x00) or a 16-bit (0x01) start/stop range, for the points requested | |
| 05:31:57.008 | - Confirm each response that asks for a confirmation | |
| 05:31:57.009 | <-P-- | 05 64 17 44 01 00 00 04 F3 92 |
| 05:31:57.009 | C2 C2 81 90 00 28 02 01 00 00 01 00 01 00 00 01 BC 8E | |
| 05:31:57.009 | 00 00 FF FF | |
| 05:31:57.009 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 23 dest: 1 src: 1024 |
| 05:31:57.009 | <-T-- | fir: 1 fin: 1 seq: 2 |
| 05:31:57.009 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 IIN(DeviceRestart, NeedTime) |
| 05:31:57.009 | g40v2, 2-Byte Start/Stop, start: 0 stop: 1 | |
| 05:31:57.009 | [0] - flags: 0x01 value: 0 | |
| 05:31:57.009 | [1] - flags: 0x01 value: 0 | |
| 05:31:57.009 | Passed procedure: 8.23.2.6.2 |