05:25:00.550		Running procedure: 8.4.2.2.2
05:25:00.551		This procedure is enabled because the following options:
05:25:00.551		- supports.analogOutput.commands == true
05:25:00.551		step: 1
05:25:00.551		- Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
05:25:00.551		- g41v2, 2-Byte Count and Index, count: 1
05:25:00.551		- [65535] - value: 10 status: 0 (SUCCESS)
05:25:00.552	--A->	Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
05:25:00.552		g41v2, 2-Byte Count and Index, count: 1
05:25:00.552		[65535] - value: 10 status: 0 (SUCCESS)
05:25:00.552	--T->	fir: 1 fin: 1 seq: 0
05:25:00.552	--L->	master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 18 dest: 1024 src: 1
05:25:00.552	--P->	05 64 12 C4 00 04 01 00 30 DD
05:25:00.552		C0 C0 05 29 02 28 01 00 FF FF 0A 00 00 D9 66
05:25:00.552		step: 2
05:25:00.552		- Read a single fragment response w/ sequence(0x00)
05:25:00.552		- Verify that the IIN field contains IIN(ParamError)
05:25:00.552		- Verify the response contains the exact object header:
05:25:00.552		- g41v2, 2-Byte Count and Index, count: 1
05:25:00.552		- [65535] - value: 10 status: 4 (NOT_SUPPORTED)
05:25:00.554	<-P--	05 64 14 44 01 00 00 04 A3 01
05:25:00.554		C0 C0 81 90 04 29 02 28 01 00 FF FF 0A 00 04 3C 3D
05:25:00.554	<-L--	master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 20 dest: 1 src: 1024
05:25:00.554	<-T--	fir: 1 fin: 1 seq: 0
05:25:00.554	<-A--	Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 IIN(DeviceRestart, NeedTime, ParamError)
05:25:00.554		g41v2, 2-Byte Count and Index, count: 1
05:25:00.554		[65535] - value: 10 status: 4 (NOT_SUPPORTED)
05:25:00.554		step: 3
05:25:00.554		- Check that no analog control point operated
05:25:01.555	[PLG]	Analog output did NOT operate
05:25:01.555		Passed procedure: 8.4.2.2.2