05:25:05.241		Running procedure: 8.4.3.2.2
05:25:05.242		This procedure is enabled because the following options:
05:25:05.242		- supports.analogOutput.commands == true
05:25:05.242		step: 1
05:25:05.242		- Direct Operate No Ack(0x06) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
05:25:05.242		- g41v2, 2-Byte Count and Index, count: 1
05:25:05.242		- [65535] - value: 10 status: 0 (SUCCESS)
05:25:05.243	--A->	Direct Operate No Ack(0x06) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
05:25:05.243		g41v2, 2-Byte Count and Index, count: 1
05:25:05.243		[65535] - value: 10 status: 0 (SUCCESS)
05:25:05.243	--T->	fir: 1 fin: 1 seq: 0
05:25:05.243	--L->	master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 18 dest: 1024 src: 1
05:25:05.243	--P->	05 64 12 C4 00 04 01 00 30 DD
05:25:05.243		C0 C0 06 29 02 28 01 00 FF FF 0A 00 00 4B 5D
05:25:05.243		step: 2
05:25:05.243		- Verify that no link layer frames are received within 2000 ms
05:25:07.245		frame receive timeout
05:25:07.245		step: 3
05:25:07.245		- Check that no analog control point operated
05:25:08.247	[PLG]	Analog output did NOT operate
05:25:08.247		Passed procedure: 8.4.3.2.2